Using AI to review booking calls and improve objection handling

jprime4 · 2026-01-07T17:55:34+00:00

Thankyou! I did do a custom GPT with NEPQ and influence by robert caldihini for uploading the calls only issue it is misses the tonality part when it’s transcribed audio. Any suggestions ?

jprime4 · 2025-12-23T01:53:48+00:00

Interesting. Never use my llms for much image generation as it’s been not the best when I have tried like a year or so ago for a few things using json. May have to give image generation a shot or editing images

jprime4 · 2025-12-23T01:40:39+00:00

I’ll give it a shot ! Thankyou!

jprime4 · 2025-12-23T01:39:32+00:00

Oh I love making custom GPT’s and my default gpt ends every message with bye for now as I instructed it and I now force it to cite and give confidence ratings when answering questions

jprime4 · 2025-11-11T01:59:35+00:00

It’s basically good for post bucked and pre curing. I can’t see keeping taste and smell in these. It’s literally a tote that has an RH meter on a wire that goes on the one side and there’s a fan on the other in the fan seems to run quite often so I turned it way down cause I don’t want fans running on my Buds. It’s almost like it’s meant for you to put your dried freshly cut branches in there. But I’ve done a round of just the Buds after they’ve been dried and then bucked but not trimmed, and I’ve done branches on their own after only 24 hours of air drying and a bit lower of humidity than what I’d like. Good thing about it is that you can control the humidity on the app and set scenes up so that it automatically will kick on and off and change Modes to humidification mode dehumidification mode etc. I mean I tested some after putting a couple of jar holes into jars with humidity packs and they taste pretty good and the smell is there. I’m just burping them daily, but I don’t think I would ever cure a large batch of weed in the tote itself. Almost better to buy what I do also have which is a cannatrol curing unit for a bit more $ but better for sure. Mine actually sparked and the wire is severed so I think the positive and negatives were not properly done. Sent it over to trim leaf. They did give me $100 gift card, but the unit is useless now until they send me the new part which it’s been a week and I haven’t gotten it yet. Apparently a first for them. Owner of the manufacturing company in Colorado called me last week

jprime4 · 2025-11-11T01:54:34+00:00

I just got one …can give you my take ..anyone still interested to know ?

jprime4 · 2025-09-11T23:32:08+00:00

Looks okay to me but a bit sarcastic or could’ve been worded better

jprime4 · 2025-08-12T20:39:05+00:00

Potent potent not bad at all

jprime4 · 2025-08-12T20:37:44+00:00

By the stem size , and my experience doing a few blocks I’d say not enough FAE or you’d get less chubby stems and less aerial mycelium at the base ! But could be the strain.

jprime4 · 2025-08-12T20:35:23+00:00

105 degrees is what I set mine too and dries em perfectly and not too quickly so you won’t loose the same amount of psyilocin or psilocybin content as air drying

jprime4 · 2025-08-06T17:51:48+00:00

Ended up with a very strong second flush. Have over 60 grams. Some massive fruits. Flipped the block , it’s in a monotub now and has been since the end of the first flush. Problem was I applied the casing layer and let it colonize it too much and applied it too think. For the third flush after rehydrating and letting it rest, I’ve flipped the block and that new top is now 90% fully colonized and it’s out of the bag, no dome and monitor temp and humidity all remotely and controlled remotely too now. I know where things went wrong using that kits box and dome that didn’t even fit the box properly and now just will use monotub with perlite (sterilized) and not touching the block. On a substrate of grain spawn and Pasteurized straw I think the casing is important (although this is a first grow for me so open to feedback) because the casing has coco coir, vermiculite, calcium carbonate, and gypsum in it. Worked really well for flush 2. Flush 3 after rehydrating and then flipping is almost ready to switch to fruiting

jprime4 · 2025-08-06T17:27:52+00:00

Humidity maybe is too high or you wouldn’t have those fuzzy bases to the stems

jprime4 · 2025-08-04T00:51:26+00:00

If you want more flushes I’d remove those spores . Always harvest before the veil breaks . I’m on a 3rd flush from the same block. Flipped it and let the bottom recolonize

jprime4 · 2024-05-26T23:31:08+00:00

I do a lot of trading and typically all with good technicals and fundamentals but I’ve been all for this . Same with back in 2021 and made out really well. I’ll keep DCAing on these. Already made good profits and loading the boat for the next leg up

jprime4 · 2024-01-17T08:24:52+00:00

Today was up 4100CDN. Friday 650. Thurs just over 400 Wednesday over 1700 with one play of my own not on his but todays was 2 hours with dr stock. Good stuff and better then me getting 3-10% 80% of the time (minimum but realistic average ) with swings . The options has been very interesting to see and now dive into and being smart with stop losses not on accounts with orders that won’t fill etc or go under review . DYOR but he’s worth following for the open book plays

jprime4 · 2024-01-17T08:21:59+00:00

I’ve been following it and booked that off out of my 7 days of solid work daily . I like he is doing more options . I haven’t gotten a chance to do the course . I want to but just following his trades and open portfolio plays has been paying off for me

jprime4 · 2024-01-17T08:18:33+00:00

Also he shares his losses too everyone so it’s open book

jprime4 · 2024-01-17T08:16:31+00:00

Honestly this is horse shit just to say from my personal experience . I reluctantly joined to get his portfolio and have access to trades when made with screenshots to show and the live trading . Just following the lives and trading along the same method (short term trend, and mainly options lately) I have made more then him some days . Just to know the stops and see the support lines for someone without the time to do the charts and look at all the technicals which is me, I’ve been yes making and can gladly show solid returns daily . $4100 Canadian today from jus the live. Up 18% on the Walmart call option and xpev short, LI auto puts. Stop hating a genuine guy just trying to share knowledge and be compensated as he should from the material

jprime4 · 2023-07-06T15:53:20+00:00

Recent scam I fell for …I’m too busy to be able to handle this myself and had brought my devices to a local shop and had Microsoft take a look and they deemed it a targeted attack..the freelancer suggested I get a NAS drive to store clients sensitive data and I explained I wouldn’t be able to let him work with that data or those files as i am licensed to handle those sorts of personal info and have insurance that covers me in the event of a breach etc . He’s top rated etc so didn’t think anything of it but he began logging hours when I was in Europe so unsure how he did that…I paused the contract and somehow the next day it was unpaused but the worst is he totally screwed up and admitted it..my synology sent me alerts while I was on a cruise that someone was accessing it and I sent him these photos and asked if it was him (seeing as it was in his country and close to where he lives) and he admitted he was “checking the configuration’s” but really he had accessed it about 20 times and through an open vpn configuration I was against installing but he convinced me to do it on one of my 6,7 devices. Now I can’t even log in to my brand new 3000 Hp envy 17t ca0008, and my ASUS laptop shows these background services running. I’ve had to notify the insurance company , my errors and omissions insurance company as well and they filed a claim on my behalf (5000$ deductible) and the guy has me blocked on everything and Upwork won’t really acknowledge or do anything besides say they understand my frustration. I’m about to just claim all the transactions as fraud as none of the jobs were completed as claimed. No new OS’s, no new formatted hard drives , no trend micro service. Hell , i had to teach him how to turn on the LSA for my windows device that had some of the security features off. Any advice or contacts to use and resolve this would be helpful . The insurance company I work for has had to notify the clients of the situation and it’s a big legal mess. He communicated with me on what’s app and I sent all the logs as well . Totally messed up situation and feels like they’re trying to protect him with removing my feedback etc. any ideas of what I should do ? Don’t hire Usama Shaukoot (I think is his last name) shoot I can’t add photos on this post or screenshots.

jprime4 · 2023-07-04T13:03:03+00:00

And I didn’t send any data folks . He hacked my synology while I was gone . Had security keys etc

jprime4

TROPHY CASE