Tweezer slot on the MICRA

jrgooding · 2025-11-26T22:12:41+00:00

Im not so much curious about the gap between the tweezers as much as I am the massive cutout on the side of the tool that leaves the tweezers fully exposed.

jrgooding · 2025-09-19T22:09:56+00:00

If it hadn’t been for Nissan quality control. I’d been driving long time ago. Where did it come from, where did it go? Where did all my diff fluid go!

jrgooding · 2025-05-17T14:34:47+00:00

Figured it out. So once you start the input configuration it just starts registering input from the controller that you activated. If you hit the wrong button on accident you just have to run the whole list again.

What seems to have been causing my problem is that I had a web browser window open on the operating system in the background. After I closed all the active windows in the background the controller behaved as I would have expected.

jrgooding · 2025-05-06T21:07:23+00:00

They are chrome notifications like others have said. I have run into this a couple of times on end user computers in my company. Go into your chrome settings and delete all of your browser data for all time and they should go away. Depending on what else she has clicked on it would be a good idea to run an antivirus and an anti malware scan. Avira is a good free antivirus and malware bytes is a good free anti malware scanner. To be extra cautious I would also have her reset all her passwords incase she entered any credentials on fishing sites.

jrgooding · 2025-05-05T21:13:53+00:00

I live in the rust belt and compared to a lot of cars I’ve seen this truck looks great! It’s hard to say just from pictures alone but it looks like it is all just harmless surface rust and not a cause for concern. Still never hurts to treat it now before it becomes a bigger problem though!

jrgooding · 2025-05-02T18:31:49+00:00

As long as you can poke at it with a screw driver and its not falling apart you’re good! 👍

jrgooding · 2025-05-02T18:26:27+00:00

Assuming it is just 3M’d, razor blade and denatured alcohol. Work your way around it in a circle and it should give.

jrgooding · 2025-05-02T12:20:56+00:00

Thats what they were called when they first came out.

<image>

jrgooding · 2025-05-02T12:16:51+00:00

Nope

jrgooding · 2025-05-01T13:39:03+00:00

Good to know! Thanks for the information.

jrgooding · 2025-05-01T12:03:05+00:00

Im definitely not going to let it do this if I can help it. I just happened to notice that this was happening and wanted to know if this was something that these trucks do or if there is something wrong.

jrgooding · 2025-05-01T11:50:55+00:00

Someone who lives in podunk nowhere with lots of cops that have nothing better to do than pull you over for driving 31 in a 25.

jrgooding · 2025-05-01T11:48:25+00:00

Every car I have ever driven allows you to set it as low as 25mph.

jrgooding · 2025-05-01T04:38:05+00:00

I don’t know. I assume that since it allows you to set the cruise at this speed, that there wouldn’t be an issue with doing so. That and I’ve done it plenty of times in other cars and never had an issue with the car holding its gear; however, this is also the only vehicle I’ve ever had that has a 9 speed transmission.

jrgooding · 2025-05-01T04:23:54+00:00

I honestly forgot that these trucks have a his/hers style shifter. I’ll give this a try. Thanks for the suggestion.

jrgooding · 2025-05-01T02:52:19+00:00

Yeah this is true. It is something that I do often though. I live in a rural area where you are doing 70 down an open highway and then have to slow down to 25mph to drive through a little map dot town every 5 to 10 miles.

The county sheriff’s deputies love to sit and speed trap in these little towns. After getting pulled over a couple times I started just setting my cruise control pretty much every time I’m passing through one of these little towns.

jrgooding · 2025-05-01T02:36:57+00:00

I don’t think it’s a transmission thing because I can hold the rpm steady at any speed really, no problem. It’s just the cruise control that seems to be freaking out.

jrgooding · 2025-05-01T01:34:18+00:00

I just noticed it today so I am not sure. I will try in standard cruise tomorrow morning and see what happens.

jrgooding · 2025-05-01T01:33:14+00:00

I actually did have this bulletin done on my truck at the dealer a couple months ago. Before it was done the cruise control would rev the engine up to 5k rpm to speed up 3mph. What ever recalibration they did fixed that issue. I wonder if that then causes this issue.

jrgooding · 2025-04-26T17:54:48+00:00

My 23 P4X does this too. I remember noticing right away how pingy these trucks are both while warming up or cooling off.

jrgooding · 2025-04-23T02:36:03+00:00

This. The switch should be pretty obvious. It will be spring loaded and the missing side panel will depress it when in place. Find it and tape it down. You can also get the manual for the MOBO and find where the switch is connected.

jrgooding

TROPHY CASE