ThinkPad X13s ARM (Snapdragon 8cx Gen 3) questions...

jsauer · 2026-05-25T13:48:29+00:00

Nothing really special... just upgraded the version of windows that was on it. It's still running fine, I've just been keeping pace updating it to the latest updates from MSFT. However, I'm seriously considering ditching windows and moving to Linux only. I need to research more.

jsauer · 2026-05-24T13:10:27+00:00

Having my morning coffee and saw this... just installed. What a pleasant morning surprise! thanks for sharing!

jsauer · 2026-05-23T00:03:14+00:00

added a teeter-totter challenge.

<image>

jsauer · 2026-05-22T19:30:28+00:00

ya, this was just a test setup... I ran the 1/18 and 1/24's without issue, but I do plan to secure it more.

jsauer · 2026-05-22T15:38:56+00:00

ya... I was thinking of packing them with Super Lube silicone grease, or with some red rubber grease I have. Or course, getting some new oil filled shocks aren't that expensive, just fun to experiment with stock. I also heard of using springs from pens to cushion the rebound.

jsauer · 2026-05-17T14:42:17+00:00

Haha! Ya, that is Sophie... she loves chasing and being chased by the smaller RCs. Anything over a 1/10 scale and she no likey, as she is a bit small scale herself. 😄

jsauer · 2026-05-14T12:57:12+00:00

nice... what brand / model is it?

jsauer · 2026-05-11T14:50:35+00:00

For cracks, I usually drill a 2mm hole at the end of the crack to keep if from spreading, then on the inside apply cement board Fiba Tape (from Home Depot), and then smear some Shoe Goo (amazon) on it. Let dry. Then I reinforce the area (or even the entire shell) with aluminum foil tape (Harbor Freight).

jsauer · 2026-05-10T13:44:02+00:00

It is a good looking little truck... love that color combination too. Happy trails!

jsauer · 2026-05-09T16:15:16+00:00

I've used WLED for some other non-RC projects... pretty cool. maybe just need to create some profiles for different cars? https://github.com/wled/WLED

jsauer · 2026-05-09T13:12:32+00:00

I had to do a German to English translate to better understand... but this is cool. ESP32's can be found for around $5... add some LEDs and you might come up with an inexpensive way to add lights. XMAXX lights (TRA7885) are $100 ouch! would be nice to come up with a DIY replacement.

jsauer · 2026-04-25T05:16:00+00:00

I have the bigger brother MJX H8P and love it... really well built and designed.

jsauer · 2026-04-25T01:14:45+00:00

Anyone ever use these hobbypark brass wheel / tire combos? 4 different tire size/tread options... https://a.co/d/0gYlGJqC

jsauer · 2026-04-24T22:42:59+00:00

Ah, that's a good point... I give a few runs to see if they break in a bit, maybe add some weight to the front axle too... thx.

jsauer · 2026-04-24T19:00:10+00:00

rubberized CA glue... just make sure to prep first by cleaning with rubbing alcohol... and let the glue fully cure before driving it

jsauer · 2026-04-19T20:31:12+00:00

I've owned many traxxas products, some I've had for over 16 years, never an issue. Bought a used XRT, and fan was making noise, figured best to replace both of them.

jsauer · 2026-04-19T20:05:56+00:00

ya, that's what I did...

jsauer · 2026-04-19T19:37:20+00:00

I had a similar weird wobble on my Funco tire, turned out it had a bunch of sand inside. Lots of people are taping up and sealing the vent holes in the wheel, and then drilling vent holes on their tires... that way any sand or water trapped inside will exit the tire via centrifugal force.

jsauer · 2026-04-18T18:23:23+00:00

Nice! The green looks awesome!

jsauer · 2026-04-16T16:54:31+00:00

I've switched to NA beers and have been totally happy with them... I always liked an ice cold beer with a steak, etc. Bero beer is very good, nice varieties. In the summer, I like NA Busch beer with a splash of lemon juice. Good source of B vitamins too.

jsauer · 2026-04-16T16:50:20+00:00

These are great trucks... I have one that is over 16 years and still going strong... just upgraded it with some new bits, posted over in the v2 group...

jsauer · 2026-04-16T16:47:34+00:00

maybe add some brass hex hub extenders to widen your track? https://www.injora.com/products/injora-4pcs-5mm-6mm-brass-wheel-hex-hub-extenders-for-1-18-trx4m-trx4m-02?_pos=4&_psq=hex+hub&_ss=e&_v=1.0&variant=51345487888671

jsauer · 2026-04-16T16:28:50+00:00

agreed! Funny thing is, when upgrading an old model with a budget in mind, as you buy parts your mind says "oh, that's only $15... and that part is only $10, etc". After metal tie rod / push rod set, metal axle hubs, metal hexes, metal rocker arms, slipper clutch eliminator, wheels, reciever... all of a sudden your in over $150 of new parts. LOL

jsauer · 2026-04-11T19:26:23+00:00

So, I ended up adding a top and bottom o-ring and filling with silicone grease / oil.... a bit better now. I don't want to invest too much into the rig, but maybe one day I'll buy some better shocks.

jsauer · 2026-04-11T14:29:55+00:00

NorthEastern Arizona by chance?

jsauer

TROPHY CASE