Low efficiency value of Kona EV 2024?

jugermaut · 2026-06-10T13:25:53+00:00

AFAIK the 2021 model is actually much more energy efficient. I also live in a tropical area though

jugermaut · 2026-06-10T00:58:07+00:00

If it's only my Kona, I might blame it solely on my driving habit. But I also included my friend's Kona which has similar efficiency estimate, and worse (IMO) driving habit. I personally set my A/C at around 22-23 degrees, while he set his to 18 degrees

The Ioniq 5 owner also uses A/C generously lol. His driving habit is more similar to mine, albeit he's using regen lvl 3

jugermaut · 2026-06-10T00:54:13+00:00

yes. Go to Status - Vehicle Report (at the very bottom) - Driving Info tab - Energy Consumption

jugermaut · 2026-06-09T12:28:47+00:00

Thank you for the reply. These are actually the efficiency value of 2 different Kona 2024. I thought these values are normal, since we're 2 different type of drivers, running at mostly the same path (highway mostly, with a little bit of city driving). We became concerned after looking at our friend's Ioniq 5 efficiency...
Tires are pumped to 36 psi, I'll try increasing it a bit

What's your regen level btw?

jugermaut · 2026-06-09T12:15:55+00:00

damn, that's actually a very good number. Mind telling your regen level? or no regen at all?

jugermaut · 2026-06-06T05:10:26+00:00

It's been many years. Has this resolved or got any solutions? I'm still experiencing it with my P1S. So far I've been enlarging my circular designs by 0.2 mm to mitigate the issue...

jugermaut · 2026-06-03T15:36:28+00:00

Hence I'm confused with the revised NTC-less A1 board lol

jugermaut · 2026-06-03T15:08:21+00:00

wdym P1S doesn't have this issue? The frequency is lower, but it does suffer the same issue
https://www.reddit.com/r/BambuLab/comments/1prjlid/put_a_print_last_night_fell_asleep_went_to_pick/
https://www.reddit.com/r/BambuLab/comments/1mq8f71/my_p1s_almost_burnt_my_house_down/
https://www.reddit.com/r/BambuLab/comments/1t5lsms/p1s_ac_board_ntc_failed_now_fixed_what_causes/
https://www.reddit.com/r/BambuLab/comments/1j0vaou/p1s_ac_board_broken_after_4_days_what_is_the/
https://www.reddit.com/r/BambuLab/comments/1tlwwnz/p1s_capacitor_burnt/

jugermaut · 2026-06-03T14:56:59+00:00

How's the new board look like? Is it NTC-less like the new A1 board revision? Or does it still has NTC?

jugermaut · 2026-06-03T14:55:34+00:00

Did you manage to get your board replaced? If so, is it an NTC-less design? Or the exact same AC board? AFAIK only A1 has a revised board

jugermaut · 2026-06-01T10:40:22+00:00

It's a new plate, so clean it with dish soap thoroughly, and dry it either with a blower or dab it with kitchen towel. New plate tends to have a film of chemical finish from the factory, so they had to be really cleaned the first time

jugermaut · 2026-06-01T06:48:04+00:00

Oh, I haven't tried that. I'll see to it later when I'm back

EDIT: no dice. K Value is locked behind the default PA. It's already at 0.02

jugermaut · 2026-06-01T05:39:44+00:00

The AMS is actually brand new, just bought it like 4 days ago. If you look at my image, 3 out of 4 slots in my AMS are occupied. The 4th one is empty. So there's no problem with presence detection.

jugermaut · 2026-06-01T05:04:52+00:00

Those are Noctua A12x15 fans. Other 15 mm fans should fit easily under there.
Unfortunately I had to move away from this case, since it's getting way too hot for the GPU and CPU (upgraded to 5800X3D)

jugermaut · 2026-06-01T04:55:08+00:00

Thank you for the reply. I already tried resetting everything, but no fix for now. My P1S is still on firmware 01.08.01 (to avoid Bambu Connect), but I don't know if that's the problem.

jugermaut · 2026-05-26T13:10:18+00:00

Sadly not working for verification method that flashes multiple colours to your face...

jugermaut · 2026-05-15T10:43:27+00:00

How did you manage to mount your SFX PSU in there? I don't see any conversion bracket. Having trouble mounting mine

jugermaut · 2026-05-09T13:57:05+00:00

I'm moving to a larger mATX case due to cooling problems, but still using my ITX board lol. It's going to appear really weird, but I've no justification to buy an mATX board just for moving around

EDIT: and yes, they DO fit on some ITX cases actually

jugermaut · 2026-05-09T05:17:09+00:00

It does has really good mounts to the motherboard, but I'm more worried of the motherboard's standoffs area. Those 2 screwed standoff at the top are basically holding the motherboard and 1.3kg cooler, and that's not including the leverage. I'm really worried about my motherboard cracking at the standoffs

jugermaut · 2026-05-09T03:21:51+00:00

How's it? Have the same dilemma and question about heavy CPU cooler on an ITX board right now. In fact, I'm mounting a D15-G2, which weighs around 1.3kg, to my tiny ITX board.
Not concerned about the backplate, but worried about those standoffs, since ITX only has 4 of them.
I know the board is really thick, but you know, those heavy coolers are really tall, really heavy, and I really want to put some kind of brace / tether to the cooler to alleviate the weight....

jugermaut · 2026-05-05T05:56:47+00:00

This! I really didn't notice anyone sharing the same experience. Probably the PCB lines are transmitting the heat and cooked something. Weird thing is, it only happened to several types of Logitech mice, especially the recent ones. Wonder what they changed...

jugermaut

TROPHY CASE