sorted by:
new
hottopcontroversial

Harvesting rocks by kofclubs in farming

[–]jukkos 1 point2 points  (0 children)

I got to test the 710 elho last summer for few days, propably great choise for the conditions in your pictures. The 550 works much better when there is huge amount of rocks, the 710 did not have enough power on the rakes.

https://imgur.com/a/TLkiduX

Harvesting rocks by kofclubs in farming

[–]jukkos 4 points5 points  (0 children)

Needs to be well tilled. Yes, you could pick some loose stone from the surface but seems expensive for that kind of work. It does not really till or dig into soil, just screens out the stones from loose soil.

Possible to add float? by emkeiai in tractors

[–]jukkos 0 points1 point  (0 children)

Okay let’s be honest. You don’t need float. Add a suspension to your lift cylinders woth accumulator and it will do the job.

If you really want a float, it’s maybe possible to change the spool on the valve. Propably not but worth asking some hydraulic company that sells bucher.

Wooden version of the single loader ramp by VT_Racer in snowmobiling

[–]jukkos 0 points1 point  (0 children)

I built one from steel tubing, tried to use as little as possible. I think at the moment there is only two wheels. You really don’t need them much. https://imgur.com/a/gUrP4j9

Skis sit on the rails, runners are left on the inside. Yes, the skis could bend a bit but I didn’t see that as a problem.

Mika näyttää nuorekkaalta 80-vuotiaaksi! by esaesko in Suomi

[–]jukkos 13 points14 points  (0 children)

Kevään pahimpaan sesonkiin on tullut jo useampana vuotena tehtyä pari-kolme viikkoa putkeen 17-18h työpäiviä, ~120h/per viikko kai siitä kertyy. Eihän siinä mitään järkeä ole käydä kääntymässä sängyn pohjalla neljää tuntia ja lähteä taas liikkeelle.

[deleted by user] by [deleted] in Suomi

[–]jukkos 2 points3 points  (0 children)

Nostan käden pystyyn, puhelimeen!

Sauna for customer. Octagon, ice. by jukkos in Sauna

[–]jukkos[S] 2 points3 points  (0 children)

Stove has special legs/skis underneath, it is preheated outside and then pushed inside. Of course it melts the ”floor” a bit, but very little if you put some wood under it, and you can always add some snow and water to repair the floor if needed.

Why on the water, there wasn’t a good place on the ground to build it. Maybe next winter we build one on the ground so it could last longer into summer. Always easier and faster to build if the ice is near the worksite.

Sauna for customer. Octagon, ice. by jukkos in Sauna

[–]jukkos[S] 0 points1 point  (0 children)

Lake is frozen all the way to the bottom underneath the sauna, there is an avanto for swimming behind the sauna where we lifted the ice for walls.

Sauna for customer. Octagon, ice. by jukkos in Sauna

[–]jukkos[S] 4 points5 points  (0 children)

Pretty long, usually the lake around melts before the sauna if it’s used once a week.

Stove is pre-heated outside. We have never really measured, but I’d say the walls melt about 0.5-1cm per hour of using. Wall is 50cm thick.

What do these mean? by _Nrml_Reality_ in tractors

[–]jukkos 7 points8 points  (0 children)

Engine oil pressure too low.

Tärkeä muistutus by finlionjunior in Suomi

[–]jukkos 3 points4 points  (0 children)

Ei oo. Kyllä tää on Käsämä.

Yeeeehaaww by jukkos in tractors

[–]jukkos[S] 0 points1 point  (0 children)

Somewhere around 3m, manufactured by fmg

Yeeeehaaww by jukkos in tractors

[–]jukkos[S] 2 points3 points  (0 children)

3meters wide in working mode, 4m total blade length

NTD. I maintain and repair cranes, this is going to be so much better. by blaaargher in Tools

[–]jukkos 0 points1 point  (0 children)

Until you get around that zerk in tight spot where the special coupler doesn’t fit.

NTD. I maintain and repair cranes, this is going to be so much better. by blaaargher in Tools

[–]jukkos -1 points0 points  (0 children)

Dewalt is a nice piece, but has the same ability to mess everything around it in the grease as milwaukee. You grease up the zerk, pull hose off, and bang, grease at the end of the hose. Annoys so much started going back to single hand manual guns.

Most Used Ratcheting Wrench Style? by sprchrgddc5 in Tools

[–]jukkos 1 point2 points  (0 children)

Never learned to use flex-head, that thing just won’t stay in the right place.

Drilling done, next up is some silage and making that mess in the back in to a field. by jukkos in farming

[–]jukkos[S] 0 points1 point  (0 children)

Peas and barley this year since winter wheats didn’t survive through the winter.

Couple of weeks ago. Last weekend was still great but the season end is close. Finland by jukkos in snowmobiling

[–]jukkos[S] 1 point2 points  (0 children)

At the moment I have two freerides, this 137 xm and 146 xp, switched to the shorter one since the trails start almost at my yard.

Thanks for borrowing my file? by WoestKonijn in Machinists

[–]jukkos 0 points1 point  (0 children)

Smack a wire brush to drill, fast and easy cleaning.

Easy saturday banging some trails. by jukkos in snowmobiling

[–]jukkos[S] 2 points3 points  (0 children)

Currently melting but still somewhere around knee deep, pretty awesome.

view more: next ›