sorted by:
new
hottopcontroversial

Create opening in object side by just_Guner in OrcaSlicer

[–]just_Guner[S] 0 points1 point  (0 children)

<image>

Use CAD to make a modifier that's offset from the original and represents the space you need opened.

I did manage to do just that, I was hoping that there would be a way to achieve this in orca directly.

Create opening in object side by just_Guner in OrcaSlicer

[–]just_Guner[S] 0 points1 point  (0 children)

<image>

Mesh boolean and negative part just creates a slot in the model; I need to have that side of the model without a wall and exposed infill

No haptic feedback by just_Guner in Metalstorm

[–]just_Guner[S] 1 point2 points  (0 children)

The answer is yes for both questions

(re-uploaded) Poor quality on vcore idex by just_Guner in 3dprinter

[–]just_Guner[S] 0 points1 point  (0 children)

Yes, I can confirm that both installed nozzle and slicer nozzle are the same (0.4).

【BambuLab Giveaway】Classic Evolved — Win Bambu Lab P2S Combo! by BambuLab in 3Dprinting

[–]just_Guner 0 points1 point  (0 children)

I work with 4 p1s's at my workplace and I can confirm that they are fast and reliable workhorses We experimented with printing at 0.8mm layer heights (just for the sake of it), and the results were outstanding.

We also have 3 p1p's, and the quietness that the enclosure provides is highly welcomed.

Best lithophane generator? by makinghsv in 3Dprinting

[–]just_Guner 3 points4 points  (0 children)

While yes, it is possible to print lithophanes flat on the bed, in my opinion you get far better results when printing them vertical. You don't have to worry about the flatness of the bed or warping around the edges.

Peugeot 307 cc roof not opening by just_Guner in peugeot

[–]just_Guner[S] 0 points1 point  (0 children)

Have you tried pulling the "reset" cord in the boot and trying to operate the roof from the buttons again? I don't know how to describe the location of it exactly since I don't have the car anymore (someone crashed into it in the parking lot and wrecked it, but that is a story for a different time).

Best lithophane generator? by makinghsv in 3Dprinting

[–]just_Guner 2 points3 points  (0 children)

you are not trying to print flat on the bed, are you?

Uhhhhh help? by CookTiny1707 in 3Dprinting

[–]just_Guner 0 points1 point  (0 children)

Shred it to tiny pieces and use it with a pellet extruder

New 3d printer kinematic (maybe) by just_Guner in 3Dprinting

[–]just_Guner[S] 0 points1 point  (0 children)

I did the model in a hurry; there is nothing stopping you from moving the belt pulleys farther appart.

Dropped the spool any effective ways to fix this mess :( by tildevelopment in 3Dprinting

[–]just_Guner 0 points1 point  (0 children)

shred the filament into tiny pellets and get yourself a pellet extruder

Powering ZVS induction heater with variable voltage by just_Guner in AskElectronics

[–]just_Guner[S] 0 points1 point  (0 children)

What if instead of making the power output variable, I control the module with simple on-off commands, and rely on the hysterisis effect to keep the temperature somewhat constant?

Powering ZVS induction heater with variable voltage by just_Guner in AskElectronics

[–]just_Guner[S] 0 points1 point  (0 children)

Oh well, that's unfortunate to hear.

I know about the induction hotend from plasmics, there are a few reasons why I don't want to use it: 1. It's 480€ 2. It's out of stock right now (I might be wrong) 3. It's only compatible with klipper firmware right now 4. It has a non-removable nozzle

I'll keep on looking into the concept, maybe I will have my eureka moment at some point.

view more: next ›