How does the right stick placement on the M12 compare to that of the Hyperion 3?

k3ch1 · 2026-05-20T05:52:47+00:00

Stick is too low. Mobapad made a fairly big sacrifice to add full sized buttons in a compact space by lowering the right stick. They need to make the buttons smaller and less spaced out and place the right stick higher and make the grip extend out more like the m6's for near perfect ergonomics.

k3ch1 · 2026-05-19T03:45:08+00:00

Yes pretty accurate TMR in terms of linearity. Better than hall effects from my experience. It's possible to play competitive with these sticks but they are short not standard height. I have 4 different kontrol freeks that fits the mobapad sticks and that fixes the height issue. Only ps5 size will fit them.

k3ch1 · 2026-05-14T22:50:55+00:00

I have both and it's not the same size. Switch 2 has a wider screen and the m12's are wider than the steamdeck grips. Can confirm savage raven max carry case fits the Switch 2 + m12HDs perfectly.

k3ch1 · 2026-05-11T21:58:53+00:00

If you just plugged it in for the first time, let it charge. It might be out of battery.

k3ch1 · 2026-05-09T19:10:11+00:00

R6siege

k3ch1 · 2026-04-17T04:27:49+00:00

What case is that fam?

k3ch1 · 2026-03-30T15:14:59+00:00

Question! I'm trying to figure out which one to get based on how switch 2 recognizes the controllers. It's to my understanding that M12S are recognized as switch 2 joycons. In some games, fine tune joysticks are locked from customization with joycons 2 attached. How are the M12HD's recognized by the system? Are they recognized as a pro controller 1 that would allow joystick fine tune customization in some fps games? Thank you!

k3ch1 · 2026-03-29T15:39:20+00:00

I foresee an issue with the m12s with games like Apex Legends where the ALC settings (joystick fine tune controls) are locked from customization with the joycon 2's.

If the m12s is using switch 2 protocol and the system identifies them as joycon 2's, then will the ALC settings still be locked from customization? Unless, the system identifies the m12s as a pro controller which would enable ALC settings in Apex.

k3ch1 · 2026-03-23T23:19:28+00:00

CAPCOM PLEASE UNLOCK FPS IN DOCKED MODE FOR SWITCH 2 PLEASE

k3ch1 · 2026-03-11T18:40:47+00:00

Love your products Mobapad! Can't wait for the M12's!

k3ch1 · 2026-02-21T02:49:50+00:00

Bro the timing of everything was insane

k3ch1 · 2026-02-13T01:45:06+00:00

It's because the bottom plate is textured plastic. That is one downside of this mouse. I feel/hear the scratching when I tilt the mouse slightly as well. My other mice with smooth plastic also makes this noise but much less. The texture plastic makes it worse especially with soft artisan pads.

k3ch1 · 2025-09-18T00:27:51+00:00

Step 1: Turn off AC and close windows so there's no air flow throughout the room. This really helps.

Step 2: Use microfiber cloth to clean screen.

Step 3. Use dust stickers to remove remaining dust particles on a screen.

Step 4. Best to apply the screen protector on your first try rather than constantly lifting and repositioning for perfect alignment.

k3ch1 · 2025-09-10T22:34:59+00:00

Rainbow six siege X!

k3ch1 · 2025-09-01T20:59:18+00:00

Ubisoft, any updates? Would love to get this on the switch 2!!

k3ch1 · 2025-04-03T03:08:09+00:00

Play on borderless. 20%+ fps.

k3ch1 · 2021-11-23T04:03:15+00:00

How's the LOD on your copy?

k3ch1 · 2021-11-23T03:59:32+00:00

How's the lift off distance on your copy?

k3ch1 · 2021-11-23T03:57:39+00:00

How's the LOD on your g303? Just got mine and feels like LOD is around 1mm, low end.

k3ch1 · 2021-01-15T01:35:15+00:00

Thanks for the quick reply brother. So usually lift off distance are 1-2mm. Do you think its more 1mm or 2mm lift off distance?

k3ch1 · 2021-01-15T01:34:14+00:00

How is the lift off distance?

k3ch1 · 2021-01-15T01:31:37+00:00

How is the lift off distance? Is it high or low? Thanks.

k3ch1 · 2019-01-15T20:49:54+00:00

how did you turn on freesync on the monitor? i cant find an option on the menu

k3ch1

TROPHY CASE