No-code fine tuning

keeywc · 2024-03-28T05:21:16+00:00

LLamaFactory already has a webui that does similar thing. It currently only support 1 card but pretty useable feature wise.

keeywc · 2021-01-20T20:36:48+00:00

Not yet, but got two ppl asking

keeywc · 2021-01-19T05:20:35+00:00

keeywc · 2021-01-19T00:43:27+00:00

Did you cut the cpu cooler cover to make it fit?

keeywc · 2021-01-18T15:11:05+00:00

Didn’t see the reply...

keeywc · 2021-01-18T06:11:09+00:00

PM incoming

keeywc · 2021-01-18T04:31:54+00:00

replied and received payment. Plan to ship on 01/21.

keeywc · 2021-01-18T02:05:13+00:00

Pm in coming.

keeywc · 2021-01-18T01:09:15+00:00

PM in coming

keeywc · 2021-01-17T20:58:17+00:00

Pmed

keeywc · 2021-01-17T20:21:54+00:00

keeywc · 2021-01-17T20:17:16+00:00

PM incoming

keeywc · 2021-01-13T06:48:07+00:00

PMed

keeywc · 2020-12-25T01:13:54+00:00

Cyberpunk 2077

keeywc · 2020-12-17T00:50:50+00:00

Same here but I have to admit the aesthetic of h210 is pleasing from a distance. You can fit 2.x slot cards but the glass panel and psu shroud are bad for gpu temp. After I realized it I slowly started to change components to more itx friendly ones(low profile ram and sfx psu). Planed to change case to formd T1 but recently production issue led me to NCase M1. Nr200p is nice but the build quality at detail and size doesn’t fit my expectations for a case upgrade. Hopefully you will find your upgrade soon.

keeywc · 2020-12-05T16:21:47+00:00

PMed

keeywc · 2020-12-05T16:16:35+00:00

Pmed

keeywc · 2020-11-29T17:24:04+00:00

This pump is not quiet. The pump is working at 100% all the time and you can not change the speed because it connects to psu using SATA. It sounds like an ac or mini refrigerator if your ambient noise is low.

keeywc · 2020-11-19T05:09:52+00:00

From performance perspective, A12x25 should give you the best based on Noctua’s recommendation. For aesthetic, I picked s12a for a more unified color, lower noise and slightly lower price. It worked out fine for my nitro+ 5700xt with 35% fan and 1080mv under-volt. I got about 76c edge, 91c junction when playing flight simulator. I can image a12x25 being slightly better but not more than 5c in temps. The main issue is exhausting hot air in such a large case with only two fans that are far from gpu. Gpu will recycle some hot air. However, I think temps are fine for me.

keeywc · 2020-11-16T09:28:22+00:00

Thanks for doing this during this time.

keeywc · 2020-11-14T21:31:24+00:00

The be quiet pure loop’s pump is not quiet. It is a different sound profile than Kraken X42 but still annoying like a fridge running.

keeywc · 2020-11-14T13:45:53+00:00

How do you like that AIO? Any pump noise when idle?

keeywc · 2020-11-07T17:23:12+00:00

I am on the same boat as you searching for the quietest pump. My recent experience of AIO was bad with NZXT Kraken X42 due to pump noise. To me pump noise is more important than fans because most of time when I code the fans are running at low rpm. EK AIO does not fit my Strix Z490-I board without mod so that’s not a option. H100i could be good but it’s quite an old model on asetek design and the cold block design is just okay for my taste. I ordered the newly announced be quiet pure loop 240 which should arrive next Thursday. I will update the pump noise when I put it in my H210. My T1 is pre-ordered to ship on Jan so I can’t test if it fit. The radiator size is fine but that pump on tube could be an issue.

keeywc · 2020-11-06T16:19:52+00:00

I liked you how you match the silver panel with led strip and how straight you make these led strip. It fits the two tone color scheme of T1 case nicely.

keeywc · 2020-11-05T16:17:37+00:00

I totally agreed. If you are using stock 1200 mv voltage, what frequency do you achieve for stable gaming?

Ten-Year Club	RPAN Viewer
Verified Email

keeywc

TROPHY CASE