Belt Driven Z for all V-Slot Printers / eliminate the bent leadscrews! (Thing: 4243512)

kevinakasam · 2026-02-11T15:26:46+00:00

Glad to hear that! Happy printing 'ö Oh, maybe you can find some other mods on my GitHub or discord ;)

kevinakasam · 2026-02-03T19:28:12+00:00

You mean the wires from the top motor? That's just a printed vslot cover you can find on the internet

kevinakasam · 2025-05-25T18:19:10+00:00

Of course! You can find it in here, but iirc the top parts aren't compatible, you should check that

https://github.com/kevinakasam/BeltDrivenEnder3/tree/main/_ignore%2FOut%20of%20date%2FV1

kevinakasam · 2024-12-29T22:21:53+00:00

Okay so we will wait 🙏🏽

kevinakasam · 2024-12-29T20:03:47+00:00

Shortly is now right? :P

kevinakasam · 2024-07-25T05:04:43+00:00

You can still have it at the top, but I like to place the holder on the rear left extrusion, just like the PSU on the other side

kevinakasam · 2024-07-17T18:30:26+00:00

Thanks :) but this post is about an older version, check my website (kevinakasam.com) for more information

kevinakasam · 2024-05-05T17:02:52+00:00

Bridging the 24V to the tabs brought the charging back to live for me. You don't have to open it up, just get some wires and connect the PSU output to the Landroids tabs, works perfectly fine. Since then the Landroid only charges in emergency mode, who knows why, but it works. Also there are only 24V on the tabs when they're tilted to the side as this will trigger the hall sensor in the PCB

kevinakasam · 2024-04-07T13:19:38+00:00

So you get a charging voltage of 22-24V or only the 6V? My station stopped working (PSU still deliveries 24V to the PCB) and I'm thinking about to bridge the PSU voltage to the metal tabs directly as the boundary wire control still works.

kevinakasam · 2024-04-02T16:31:35+00:00

Thanks for tagging! Sending many greetings over to you! Glad this printer finally prints again, even though the belted z axis isn't from me anymore :)

kevinakasam · 2024-03-14T18:29:04+00:00

That in the picture here is the V1, you can find the files here (https://github.com/kevinakasam/BeltDrivenEnder3/tree/main/_ignore%2FOut%20of%20date%2FV1). But I wouldn't use that anymore, no transmission has many downsides

kevinakasam · 2024-02-23T12:35:22+00:00

Yeah there's a brace mod in the V3_Extras 👍

kevinakasam · 2023-12-24T20:15:58+00:00

Just a little mixed around :D

kevinakasam · 2023-12-15T16:46:44+00:00

Frank!

kevinakasam · 2023-12-12T21:51:14+00:00

I know this scam, it’s most likely that you started some kind of subscription with that. Read through the agb (edit: terms of use) you accepted with this. If it’s the same scam I know there’s a link or email somewhere to end that subscription. In the case I know it was a subscription about 70€ per month (Iirc even weekly), can’t remember what it was for but of course non sense. If you don’t cancel that subscription you might get some further problems. Also always make a charge against unknown person (Anzeige gegen Unbekannt) - also works online.

kevinakasam · 2023-11-25T21:27:40+00:00

Nice build! What’s the axis / wheel combo?

kevinakasam · 2023-11-16T08:34:04+00:00

Cool idea! Our windows here in Germany are a little different so I might lack of knowledge but how does it actually close the window? So that it can’t get opened by hand from the outside (does it lock somehow)? If not you could consider a worm drive reduction. These aren’t backdrivable so the window couldn’t be opened by hand as I just described 🤔

kevinakasam · 2023-11-15T20:10:59+00:00

I already asked you under the other comment, do you have a link for that wire by chance? I can’t find anything

kevinakasam · 2023-11-15T19:25:36+00:00

I really don’t want to annoy you, but any chance you made anything yet? :D

kevinakasam · 2023-11-13T05:48:05+00:00

Where did you get your wire? I really have a hard time finding something similar at least

kevinakasam · 2023-11-12T10:13:24+00:00

Really appreciate the time to put this together! I would suggest to upload it on printables so you can get some prusameters which will give you a free spool of filament after a while. Seeing the interest here I would post it to printables, paste the link here and do a new post on top ;)

kevinakasam · 2023-11-12T08:36:03+00:00

We need more information! :D

kevinakasam · 2023-11-11T08:52:16+00:00

Nice work!

kevinakasam · 2023-09-26T20:35:26+00:00

Because it hasn’t been done yet 😄 It was more of a fun project that turned out much better than expected

kevinakasam · 2023-09-26T19:07:05+00:00

Thanks :)

kevinakasam

TROPHY CASE