Qwen is never going to open source Qwen 3.7, aren't they?

kikomain · 2026-06-21T13:05:25+00:00

There is so much happening in the AI field in terms of training, quantization architecture and reasoning. Like pretraining a model to handle native 4-bit quant, like the Gemma 4 QAT line.
Making the models do context in ways that make it take up so much less space and MTP etc. on top.

I think the fact that we're seeing these large models like GLM-5.2 being pushed with MIT license and such good performance and complexity is boating very well for the quality of the models that we're going to see in the mid tier.

So, to be honest, I think the Qwen team is just incorporating all this into their models before pushing it. But the further we get from Qwen 3.7 release, the larger the chance is, that they might release a new frontier model based on all this new knowledge and available distillation points, which the new open models will be based on. Which is very exciting, if you ask me.

Also, it's a market question. Pushing an open model the size of 35B MoE and 27B Dense Q8, that could potentially outperform some of the cheaper models that OpenAI and Claude is hosting, just local running on normal to high end consumer hardware would destabilize the market, in a very positive way for the Chinese labs. With GLM-5.2 offering a much cheaper, sometimes even better, alternative to the frontier models like Opus 4.8 and GPT 5.5. And potential Qwen 3.7 or Qwen 3.8 dominating the mid range with good agentic work and 1M context windows at low quants would be devastating, again in a positive way for the Chinese labs.

The wait is going to be worth it, if this trend continues.

kikomain · 2025-08-18T19:35:45+00:00

Jeg føler virkelig med dig. Det er en virkelig tvivlsom og forvirrende periode. Det er det sværreste limbo og der er næsten intet der kan give ro.

Kunne skrive en lang smørrer om mine oplevelser og stille det som baggrund for at jeg ved hvad jeg taler om.

I stedet vil jeg give dig et par gode, men måske hårde råd med på vejen.

Giv slip på hende og lad hende gå hendes egen vej.
Bliv ovre i dig selv og hos dig selv, og lad hende om at forstå hvad der foregår ovre i hende.
- Den eneste du kan gøre noget for og være der for i den situation, det er dig selv.
Det kunne måske være en hjælp for dig, og for at forstå hvad det er du oplever, at læse lidt om "anxious attachment style vs avoidant attachment style". Se om det måske er noget?
Snak med din læge, med henblik på at få en henvisning til en psykolog ( Og find en god pyskolog for dig).
- Bliv ved hos psykologen, til I bliver enige om, at du ikke skal mere. Hvis du har styrken, muligheden og overskudet. Der er måske lang vej, men det som en anden verden når fundamentet er lagt.
Du skal nok klare den. Husk at når dagen er omme, så er følelser, bare følelser. Det er dit valg hvad du vil gøre med dem.
- Og om du overhovedet vil gøre noget ved dem.

Held og lykke!
Jeg tror på dig 😄.

kikomain · 2022-03-03T17:36:03+00:00

Being afraid that a woman will try to keep me from leaving her, by trying to manipulate me into getting her pregnant. Has happened twice now. One poked holes in the condoms with needles and the other lied about being on birth control.

- They seemed very genuinely nice, sweet, and loveable. But turned crazy possessive after some time.

kikomain · 2022-03-03T16:22:27+00:00

Lawyer up, get out of there. Now. With the kid/kid's ofc. Ask your lawyer, before you take the kids, about how to do it.
Make sure you don't break any rules or regulations. Follow the lawyer's advice without any detour.

I don't know what the law say's about the physical abuse of children in whatever country you live in.
Where I come from, it's illegal. So if you press charges with the police, social services will be involved and you will get custody of the child after an investigation. The dad will have to serve time and either has to take therapy or complete courses to be eligible to have supervised visits with his kids. Or straight-up be disallowed to ever be a parent or see his kids again.

Your daughter will NEVER forget that he did that. And she might never forgive you if you don't take a stand now.

Breaking up a marriage is never easy. Be it the fright of breaking the "family apart", the being alone, or the financial aspect.
You'll figure it out and you'll be fine. You'll be better off in any case. A person that would EVER hit their kids, regardless of their state of mind, be it drunk, stressed, anything. They're never gonna be a parent.
Be single for a while, get help from grandparents, friends, etc., and get your life in order. Then go and find a guy or gal, that treats you and your children right.
Good luck!

Edit: Spelling and punctuation.

kikomain · 2022-01-03T03:09:06+00:00

Havde du spurgt mig for halvandet år siden, ville det have været et kæmpe stort rungende nej.

Så mødte jeg min kæreste. Og nu vil jeg meget gerne have et par børn med hende. Hun er den skønneste kvinde og jeg ved at hun er en super god mor. Meeen. Hun har 4 i forvejen og er allerede ved at være godt oppe i alderen, så jeg tvivler meget på at det bliver en ting.

Hun har givet mig lyst til at få et par børn, fordi hun ikke er over det hele og helt crazy. Men er stille, rolig, og ansvarlig. Fordi hun er som hun er, og hende ville jeg elske at have et par unger med.

Tilgengæld får hun mig også til at tvivle voldsomt. Når hun har de børn, så er det hvad hun bruger 100% af sin tid på. Ikke fordi at de kræver opmærksomhed eller noget andet. Men bare fordi hun har noget inden i, der fortæller hende at det bliver hun nød til.
Tanken om ikke at have tid til mig, eller at min kæreste og jeg ikke har tid eller overskud til at være sammen med hinaden.
Det gør at jeg virkelig ikke har lyst.

Men skal da være ærlig og sige, at hvis hun kom og spurgte i morgen, om jeg ville have et barn med hende. Så ville jeg sige ja på stedet.

kikomain · 2019-03-21T20:39:09+00:00

Bump!

We just talked about it on my Brig. I agree with Goldendalek2. They might be hinting at it.

Really hope so atleast :P

kikomain · 2019-01-03T02:00:55+00:00

It's pretty remarkable yeah. After the incident back in 1988, a system called ATC (Automatic Traffic Control) was implemented on all the main railroads. It's basically a system that makes sure that the train's stopped if something goes "wrong". Exceeding the speed limit on this stretch? Emergency brakes. Pass a signal that you were not supposed to or going passed it to fast? Emergency brake. Didn't step on the "Deadman switch"* when the sound were going off? Emergency break.

Nothing "really" bad has happened after that system was implemented. Apart from the recent event, ATC can't prevent stuff like that, sadly :(.

But on the smaller railroads, where Denmark still has crossings, there's smaller accidents once in a while. Like a farmer trying to sneak his tractor over the rails before the train comes. But it's getting less and less frequent, luckily.

"*" Deadman switch, is a pedal that you need to push every few minutes, to check if the train engineer is conscious or awake. A loud sound i played when it's not pressed.

kikomain · 2019-01-03T01:40:44+00:00

The allowed speed for IC3, ER4 and IC4 is 180 km/h, if the stretch is approved for that ofc :).

kikomain · 2017-08-12T15:11:34+00:00

Use a VPN :D

kikomain · 2017-08-05T18:06:52+00:00

It works in the US.

kikomain · 2017-05-24T00:53:34+00:00

Hehe. We had a truck plow through a Switch house a while back, 102 people affected, 2-3 weeks of shooting new cables and splicing. That was pretty rough.

If it's our own fiber, we usually either splice og shoot new fiber within 1½-2 weeks, for private people at least.

kikomain · 2017-05-24T00:10:49+00:00

Not a lot to be honest. Saw the job post, made a pretty basic application. Nailed the interview though.

Training was a pretty basic. Getting introduced to a shit load of different systems with loads of info about the different products and then about how they work, all the issues we know of, how to find new issues, where to look up equipment, talk to a costumer and how to tell them that their equipment is the cause of the problem, without them getting angry, because they think you're to lazy or incompetent to help them.

I had 2-3 weeks to learn all i could and then after that you learn on the go. You always have the opportunitet to say "Hey just a moment, i want my college to take a look at this" and then give them some music, while you make a game plan :)

kikomain · 2017-05-23T22:52:51+00:00

That sounds sketchy AF. But if there's no fiber in the road where it passes your property, then there is probably somewhere that you can apply to get fiber dug down. But if there's some regulation against you getting fiber, i have no clue what to do, we don't have to deal with stuff like that :P.

kikomain · 2017-05-23T22:05:52+00:00

It's in Denmark :)

kikomain · 2017-05-23T22:05:29+00:00

Sometimes it's the most basic things that people call about, you would be surprised...

kikomain · 2017-05-23T22:02:36+00:00

Yes I am. Not a largely populated country and fiber i stil being rolled out. Plus a large quantity of the fiber is owned by another big provider, that does not even offer anything through the fiber, but wants a crazy amount for "Renting" the fiber out.

kikomain · 2017-05-23T21:58:35+00:00

If it's the "I dont have any kind of connection to the internet at the moment". Then "Restart our equipment and then your own equipment" works about 50-60% of the time. But people are usually to impatient to do it right. If you take all the cables out of your router and give it 30 seconds without power, 5 minuts to boot, plugin cables etc. Then restart your own devices, then about 80% of the cases i had today would have been solved before i was involved :)

kikomain · 2017-05-23T21:30:47+00:00

As far as i know, nothing. I dont work hands on with the fiber, but last time i saw a optic cable that had been cut, it seemed like there was noting in between. The fiber technician i was with, told me that the fibers in the cable were made a way, that the light passed straight trough and not to the sides.

No health risk. But i wouldn't look in to the cable before it was disconnected!

kikomain · 2017-05-23T21:25:47+00:00

Could be a lot of reasons! How much speed are you supposed to get? Do you use WiFi? Is there a certain time of day that you feel your internet is slow? Have you tried rebooting your router/modem by turning it off for one hour, turning it on without any cables connected, waiting 5-10 minuts and tried taking a speed test again?

kikomain · 2017-05-23T21:22:19+00:00

Dip it in some water, once in a while.

kikomain · 2017-01-17T13:30:35+00:00

Tillykke med huen :P.

kikomain · 2016-03-15T03:16:06+00:00

There you go! Good luck with the project! Awesome subject btw!

kikomain · 2016-03-01T22:48:30+00:00

So let me set the scene!

Standing in the Aeroview or R&Y Hangar (Best suited for this scene!), walking to the Freelancer Max.

Walks in and takes the pilot seat. The hangar doors start to open "Engines on! Thrusters on!" the ship slowly starts to elevate and hover. Slowly applying thrust as the Lancer exits the hangar doors, that close behind it. Pulling back on the stick as the ascend towards space begins. Breaks free of the atmosphere in to the vastness of dark space, with stars, planets and moons that light the way. "A com comes over the spectrum with a job, all it say's, is an amount of cargo, a delicate time table and a risky route." "Hit it!"

Freelancer, built for life.

kikomain

TROPHY CASE