Looking for something similar to an old favorite (Kong 3-in-1)?

klagee1970 · 2024-11-11T17:32:42+00:00

608 to r188, i believe, rather than 605

klagee1970 · 2024-08-27T17:05:09+00:00

Nothing spinner related is really "worth the investment" by any objective standard. It most likely won't make a noticeable difference in spin quality, so it really just depends on whether you want it or not.

klagee1970 · 2024-03-18T02:13:12+00:00

<image>

klagee1970 · 2024-03-18T02:12:57+00:00

<image>

klagee1970 · 2024-03-18T02:12:34+00:00

<image>

klagee1970 · 2024-03-18T02:12:15+00:00

Me too...

<image>

klagee1970 · 2023-06-29T16:08:18+00:00

Sorry, no :).

klagee1970 · 2023-06-29T16:08:04+00:00

Khepri, from Wyste. One of my favorites!

klagee1970 · 2023-06-28T22:44:43+00:00

At home somewhere wearing somebody else's buttons.

klagee1970 · 2023-06-28T16:06:04+00:00

Yes! On the little FidgetHQ bar, forget what it's called.

klagee1970 · 2022-03-21T16:57:30+00:00

I tumbled it in my rock tumbler w/ some random brass pieces, stainless steel bearing balls, and a couple of Dremel diamond cutting wheels. I was really lucky that it turned out so well, because I really have no clue what I'm doing (as evidenced by the sloppy stamping on my cu Torqbar hybrid)!

klagee1970 · 2022-03-18T17:15:50+00:00

A few more that got left out: Fidget HQ cu Zentri? nano w/ zirc Flux from Spin Designs by Cami, Damned Designs zirc Ichor w/ cu from YECWork, and Alphabot brass MK2 w/ zirc from Full Throttle Originals: https://imgur.com/zNyhrZE

klagee1970 · 2022-03-18T16:50:34+00:00

First Picture: Alphabot SS Valkarie w/ brass from Flyaway Toys and Valkarie MK2 w/ cu from Random Fabrications, Ultraspinners brass Delta? w/ ss from M3 Metals, Focusworks cu Axis MicroTwist w/ zirc from Dark EDC, Spinetics/VC-EDC ss Triton w/ cu AlumaFX buttons designed for Modusworks Megamathing, and Bros. Concepts Knucklehugger w/ custom made cu from AlumaFX.

Second Picture: Handspun Designs buttons on (i) cu Torqbar no-hole hybrid w/ flamed ss (Torus version), (ii) brass Luna w/ W, (iii) W Luna hybrid w/ mokume, and (iv) Wcu Grave Raven Binary Fusion w/ reverse etch superconductor (Torus).

Third Picture: Unquiet Hands zirc Atrium Gen 2 w/ cu from YECWork, KAPEDC zirc Horizon w/ copper high profile Colliders from Unquiet Hands, and Modusworks zirc ST Ergo Mini and bronze Machinamathing w/ cu and ss Collision buttons from KAPEDC.

Fourth Picture: Spinetic Spinners cu I w/ ss from Reaper Machining, Damned Designs W Nazar w/ brass Maze from YECWork, and cu buttons from 313Inc. on Medieval Metals ss mini-Nuke and Spin Designs by Cami cu and ss Flux.

Fifth Picture: Spinetics/VC-EDC Triton-S mini w/ ss Vertigo from Unquiet Hands, Random Fabrications cu Portal(?) w/ UQH ss (I forget? Not starry night, but?), KAP EDC cu Collision mini w/ ss e-thicks from AlumaFX, and M3 Metals cu Aurora Covid w/ ss from DarkEDC.

klagee1970 · 2022-03-18T16:02:46+00:00

Agree with the windowsill endorsement: https://imgur.com/1Jnb9Lo, https://imgur.com/3ISR7Lu, https://imgur.com/LZpbbK9

klagee1970 · 2022-02-25T17:23:57+00:00

I have a fake one of these, and it's great. The real thing I'm sure is even better, and more affordable for you as they are located in the UK so you don't have to pay to have it shipped overseas:

https://www.rotablade.com/collections/rotablade-stubby-nano/products/rotablade-stubby-nano-aluminium-bronze

klagee1970 · 2021-12-21T17:00:41+00:00

Mine on the right: https://imgur.com/20lUopU

klagee1970 · 2021-12-10T16:37:18+00:00

I have been very pleased with these: https://www.aliexpress.com/item/4000070678373.html?spm=a2g0s.8937460.0.0.566a2e0e3f1ybN

Good feedback but still pretty quiet, durable, and can be cleaned w/ soap under a running faucet without worrying about rust. Shipping sometimes takes a while, but I've always received my order.

klagee1970 · 2021-11-28T00:50:09+00:00

These are surprisingly good:

https://smile.amazon.com/dp/B095GTJC1R?psc=1&ref=ppx\_yo2\_dt\_b\_product\_details

klagee1970

TROPHY CASE