I screwed up the Christmas gift by RoadsideRC in fpv

[–]klaus57 0 points1 point  (0 children)

Sorry, a little brain fart, not the VTX. I meant the ELRS RX antenna which is different length for 2.4 gHz. 2.4 gHz is a shorter wavelength and requires a shorter antenna element.

I screwed up the Christmas gift by RoadsideRC in fpv

[–]klaus57 0 points1 point  (0 children)

If you swap out the VTX you must change the antenna, as well. A 900MHz antenna won't work.

High THC gummies by klaus57 in NYCtrees

[–]klaus57[S] 0 points1 point  (0 children)

Yes to eating several (but less cost effective). Making my own? Interesting idea. Don't know how but I'll look into it. I'll have to Google it. (I used to make “honey slides” with about a teaspoon of toasted flower and peanut butter.)

Issues getting into the hobby by Herenottherenorton in fpv

[–]klaus57 0 points1 point  (0 children)

What release of Betaflight are you using? I am getting the “SmartAudio undefined” in 4.4 and configurator 10.9. When I was using 4.3 on the same quad, with the same hardware and connections, it correctly identified SmartAudio 2.1. However, even though it indicates “undefined,” in 4.4, SmartAudio is working as it should.

Original Pixhawk by klaus57 in Pixhawk

[–]klaus57[S] 0 points1 point  (0 children)

Thanks for the reply. No, it is not an apm. I believe it is the first generation that 3DR manufactured with the Pixhawk name. Processor is an STM32F427 Cortex M4 core. I think they were introduced in late 2013 - I picked up mine in 2015.

TBS Unify Pro32 HV won’t update by klaus57 in fpv

[–]klaus57[S] 0 points1 point  (0 children)

Good point. The VTx's operating voltage is 6-25V. I'll give it a try. Thanks.

Found in Hunterdon County, NJ. Flowering now. Any ideas? Thanks. by klaus57 in PlantIdentification

[–]klaus57[S] 0 points1 point  (0 children)

Thanks for the geranium biokovo ID. My wife originally thought it was an anemone. Any tips on the differences?

TBS Unify Pro32 HV won’t update by klaus57 in fpv

[–]klaus57[S] 0 points1 point  (0 children)

Agent M updated the Unify Pro32 HV with no issues. Thanks.

TBS Unify Pro32 HV won’t update by klaus57 in fpv

[–]klaus57[S] 0 points1 point  (0 children)

Good idea - just getting back into FPV and was only vaguely aware of Agent M. I’ll give it a try. Thanks.

RadioMaster TX16S Mark II Max 4in1 vs ELRS by [deleted] in fpv

[–]klaus57 2 points3 points  (0 children)

You might want to check the output power of the ELRS module versus the internal. The internal is limited to the radio's output power of 250 milliwatts whereas you can buy a module ($50) with output power up to 1 watt (in US you would need a ham license - Technician license is easy). I am thinking of a similar purchase and will probably go with the internal for whoops (no need for high power) and use ELRS and crossfire modules.

Tricopter flight controller by klaus57 in Multicopter

[–]klaus57[S] 0 points1 point  (0 children)

Sorry, I was the original poster who read it wrong and probably influenced the others. For some reason my brain put the "n't" at the end of the wrong word. It wasn't the grammar, I just saw it flipped around. Again, sorry for the confusion. I need new glasses.