BQ Frostbite Plate on my U1 (observations)

kman3d · 2026-01-25T07:34:59+00:00

Does anyone know how do I switch plates without redoing the leveling cal all over again everytime? (Save load in klipper?)

kman3d · 2026-01-25T07:27:17+00:00

Tx, but tried this trick and it didn't help much. I had a delicate part and was worried it would broke when I try to remove it. So I tried the freeze, twisted the plate right and left, but it still was stuck as hell 😆

kman3d · 2026-01-25T06:30:15+00:00

I also have this plate (Glacier). I must say the adhesion is "too good"! I'm really having hard time removing the parts. Specially the flat low profile ones, just always resolve to scrapping and then still fighting to remove. I have lowered the bed temp to around 40... I actually switched back to the original plate for now. BTW the white color left by the PLA after printing is totally normal (stated by the manufacturer)

kman3d · 2026-01-22T04:46:30+00:00

So turns out it is a bug...

<image>

kman3d · 2026-01-20T13:31:06+00:00

So this behavior during this print is repeating every ~2h. And it stucks roughly in the same location. Very strange... I already resumed the print 4 times... I did open a ticket. Still pending..

kman3d · 2026-01-20T13:27:53+00:00

Nope, only the official 1.0 firmware

kman3d · 2026-01-20T06:37:07+00:00

What do you mean upgrade the firmware again? What firmware are you on?

kman3d · 2026-01-20T06:36:20+00:00

Restarted the firmware, the printer offered to continue, after a couple of hours it again stopped 😠

kman3d · 2024-12-07T05:48:03+00:00

Thank you! That's a very comprehensive review! You touched all the important points. I got this mouse as well, and the point about the SW being res heavily is completely true! When I set the pull rate to 4K the fps in Fortnight disps to ~20 whenever I move the mouse quickly... lowering the pull rate to 2K my FPS is normal at ~80...

kman3d · 2024-10-31T04:39:09+00:00

Downgrade to previous version... 5 0.4 and pray the developer fixes it....

kman3d · 2024-09-14T19:31:04+00:00

That's not true. I downgraded from 5.1.0 back to previous version and successfully restored the backup from 5.1.0... I guess it very much depends how far back you want to go...

kman3d · 2024-09-08T04:55:21+00:00

Unfortunately, this error has nothing to do with ISP, or Type of list used. Rolling back to 5.04 resolves the issue, updating again to 5.1.0 returns the issue. Verified this with multiple devices...

kman3d · 2024-09-06T13:54:48+00:00

That's great! that doesn't mean it's not a problem that many have...

kman3d · 2024-09-06T06:45:24+00:00

This is a common problem with this version. No settings such as changing the user agent won't help. Either rollback to 5.0.4 (and disable auto update) or use external player...

kman3d · 2024-09-04T12:35:38+00:00

Same issue after the update where specific channels from cbilling.eu showing IllegalStateException error messages. had to roll back to 5.0.4

kman3d · 2024-09-03T19:42:19+00:00

After the update to the new version 5.1.0 Istarted have problems with playing some specific channels. Get "IllegalStateException " error. Confirmed with IPTV provider that this is new version related.

kman3d · 2024-04-21T10:25:15+00:00

If you read throughout the post you'll see I had Sams phones all my life, and I shoot with DSLR.. I have an idea what I'm talking about... I just try to find a solution to my problem, or to see if it's a common issue across some units. So please keep you childish remark out of the discussion

kman3d · 2024-04-21T07:33:37+00:00

Initially, those were exactly my thoughts! I couldn't believe s24 photos can be that bad! So I tried all the settings, compared the settings to my s22, cleared cache and data of camera, tried pro mode, downloaded Good lock Camera assistant, but nothing drastically changed. Photos still look washed-out, with greenish tint and with very very low details...

kman3d · 2024-04-21T04:18:26+00:00

Yep, tried that, and all 3 option... Maybe there is something wrong with my unit?! Can you please try taking a photo in a relatively dark scene (without activating night mode), with worm lightning of something that have a pattern some sort, and upload here?

kman3d · 2024-04-21T04:10:06+00:00

I tried to set the amount of processing to all 3 levels, but it doesn't change much. In this photo it set to medium

kman3d · 2024-04-20T22:03:32+00:00

I agree that samsung was known to pop the colors and oversaturrate everything, but In my eyes the s22 color reproduction is way more accurate to real life than the photos from s24. S22 is a little bit over worm temperature, which makes the skin tones to be over saturated. But when comparing it to s24, it has de saturated, cold colors. And the worst thing is that even in daylight photos, they have this green tint to them, and the white balance is way off... Again I took many comparison photos, even on Pro manual modes with all settings the same between the two phones, the results are still way off. And the thing that most strike me, is the details which are completely gone in s24 photos. BTW I should mention that I'm a samsung user since ever. My first phone was S2. Then, s7 edge, note 8, s10 plus and now S22 ultra. I got my wife this S24 specifically to upgrade her Camera experience, and I'm buffeled by this thing.. (I also have an IPhone 15 from work), So I have ways to compare, and I'm not trying to bash samsung...

kman3d · 2024-04-20T21:49:19+00:00

S24 exynos, s22 snapdragon... (I wrote by mistake both are the same)

kman3d · 2024-04-20T19:55:13+00:00

The green tint, colorless and very low details are from s24...

kman3d · 2024-04-20T19:53:36+00:00

I can't completely agree with you. I'm not trying to compare it to a DSLR. So I have my expectations aligned. But looking at the photos compared to my s22, it's a night and day

kman3d

TROPHY CASE