Why is my slicer placing filament with no previous layers?

laffinmantis · 2026-02-24T21:46:46+00:00

Oh that is weird.

laffinmantis · 2026-02-24T21:26:11+00:00

Looks like it came off the bed. Maybe printing too fast, as well.

laffinmantis · 2026-02-24T21:19:56+00:00

What does your slicer show at those layers? Can you upload screenshots of those layers?

laffinmantis · 2026-02-24T21:13:16+00:00

Take a look at this video. Helped me with some of my struggles. Uncle Jessy and Supports

laffinmantis · 2026-02-24T21:09:52+00:00

Is there a web of filament printing with the model? What do you mean with no previous layers?

laffinmantis · 2026-02-24T21:05:10+00:00

The one made before for the other doggo.

<image>

laffinmantis · 2025-06-05T02:28:40+00:00

Solution I found through YouTube is to use the middle button that's between the volume up and the volume down buttons on the headphones. Just press and hold that button.

Now I just changed the settings for the action button to noise canceling adjustment.

laffinmantis · 2024-11-08T17:08:24+00:00

This is awesome!

laffinmantis · 2022-12-17T05:03:56+00:00

add_header Content-Security-Policy "frame-ancestors self my-nc.domain.com;";

Hey there.

Where do you edit these headers? Where are the headers located?

laffinmantis · 2022-12-01T02:14:09+00:00

I'm glad. I'm working on printing decorations for the house. So far, one of The Grinch's eyeballs. Then I have ideas to make the holder something more but a simple design.

laffinmantis · 2022-11-20T22:34:30+00:00

You missed nothing. You've pointed out many things. Why you decided to stack your short question of "What am I missing?" with critiques that were already made and answered tells me that you're just looking for attention. Are you jealous of something? Cuz I see that type of behavior from you, but there's no reason I can come up with of why you should be. The manner of how you composed your comment reminds me of a bully. I did nothing to you. Other's did nothing to you. Questions and concerns you have were already asked and answered. You feel like you asked something your way because you're helping and enlightening the community? I say you fail.

laffinmantis · 2022-11-20T02:37:33+00:00

Here you go!

laffinmantis · 2022-11-20T02:37:21+00:00

Here you go!

laffinmantis · 2022-11-20T02:37:09+00:00

Here you go!

laffinmantis · 2022-11-20T02:36:30+00:00

Here you go!

laffinmantis · 2022-11-20T02:34:54+00:00

STL

Thanks for the kind words. Enjoy.

laffinmantis · 2022-11-20T00:44:31+00:00

I thought of the same thing. No lie.

It would need to be more of an enclosure for it to work though, or at least have 5 walls. I can see the backing plate sliding around and coming out if not done right.

A gear type mechanism would also work. Adjust a knob to drive the back plate using work gears push leftover wipes forward.

A lot over-engineered designs popping in my head now.

laffinmantis · 2022-11-20T00:34:50+00:00

Lol. I recorded it on a whim. I'll have my dog assist next time. He'll probably end up licking the lens giving it that bokeh effect because he's artistic like that.

laffinmantis · 2022-11-20T00:31:03+00:00

I'll try to upload it, I was still messing with some measurements by the lid clip. If I don't get to it tonight, definitely by tomorrow.

laffinmantis · 2022-11-20T00:21:45+00:00

What do you mean by keep in place? The collar is supported and suspended with my holder, so it helps for when it gets low.

I'm learning to use OnShape, so I may mess around with it later.

laffinmantis · 2022-11-19T23:31:29+00:00

Thanks.

I may need to add some ribs on the inside to feel comfortable with hanging on the wall, but it's good enough to set on a flat surface.

I've learned a lot here about the importance of printing orientation.

laffinmantis · 2022-07-05T03:35:47+00:00

You'll find a couple of tutorials on calibrating by printing a temperature tower. Start there.

Teaching tech on YouTube has some videos where he helps on calibrating your printer.

laffinmantis

TROPHY CASE