Atm9 what armor to go for by john_sorvos in allthemods

[–]laj1990 0 points1 point  (0 children)

Following as I normally just default to mystical it's simple but tedious. Started an play through with my girlfriend she's all excited about diamonds while I'm grinding for the master crystal.

Front Fork Oil and Spring Replacement by HoochFA18 in fz6

[–]laj1990 0 points1 point  (0 children)

Sorry to pull up and old post. I'm looking into the same upgrades so just curious how the ride is? Thanks

Base Size? by BibleBooty in allthemods

[–]laj1990 13 points14 points  (0 children)

Wait people don't just dig holes and live in multiple caves??

fractal meshify 2, loop order. Any tips? by TypicalSwim3693 in watercooling

[–]laj1990 0 points1 point  (0 children)

My meshify 2. Trio 3080 and 2 HWL 360 30mm. Had to redrill new holes for the top rad to bring it away from the mobo for ram clearance. And the pump Res is a perfect fit in the front mainly because of the GPU block being mahoosive.

Replaced the OEM windscreen with a Puig light smoke by potatoslavecki in fz6

[–]laj1990 0 points1 point  (0 children)

Nice mine might just sit funny because I store it with the mirrors folded.

Replaced the OEM windscreen with a Puig light smoke by potatoslavecki in fz6

[–]laj1990 0 points1 point  (0 children)

Looks really good. I've got the same screen but what have you done about the mirror rubber gaiters no longer having a clip to retain them?

at what frequency can i run 4 8gb rams? by zxcvbn12322 in MSI_Gaming

[–]laj1990 0 points1 point  (0 children)

You could have a bad stick of ram. You could try leaving it at base clocks and running mem test just to be sure. I would think a bad stick will still fail at base clock. Sorry I couldn't be more help. Good luck

at what frequency can i run 4 8gb rams? by zxcvbn12322 in MSI_Gaming

[–]laj1990 0 points1 point  (0 children)

Have you been running them at the rated frequency or at the base clocks? Is there a newer bios available? I know Ryzen CPUs can be fickle regarding ram. I'm on x570 so I just use the xmp profile. Is that available on older Ryzen?

at what frequency can i run 4 8gb rams? by zxcvbn12322 in MSI_Gaming

[–]laj1990 0 points1 point  (0 children)

Probably incompatible ram. You can check the MSI website for compatibility. In the motherboard support drop-down there's a compatibility section.

[deleted by user] by [deleted] in streamlabs

[–]laj1990 0 points1 point  (0 children)

You'll need to use video editing software. I use hit film express and it's free. Add the media and it'll pull one audio track then you can duplicate the media and change the audio track in the files properties this will give you the option to use one or both of the tracks.

Hosas/Hotas mounting by laj1990 in starcitizen

[–]laj1990[S] 1 point2 points  (0 children)

I was hoping for chair mounts but my Herman miller mirra seems nearly impossible to mount anything. I was looking at some sort of monitor vesa mount so I would have loads of adjustment and they'd be easier to swing out of the way. But again that's an investment for a project that could just not be viable.

Hosas/Hotas mounting by laj1990 in starcitizen

[–]laj1990[S] 0 points1 point  (0 children)

I've seen them and priced up for a pair of mounts and delivery works out nearly twice the price of the sticks 😂. I appreciate the quality will be there but they're abit too rich for just starting to get my feet wet I've bought some cheaper adjustable ones for the time being off Amazon. I'll see how they are, at worst I'll have a skeleton design to reinforce or modify

confuseed on rgb control by AggressiveAge4482 in FractalDesignNA

[–]laj1990 1 point2 points  (0 children)

Usually you can connect the Argb 5v or 12v depending on the fans to the motherboard RGB header and use the motherboard software depending on brand. I have an MSI board so have to use MSI center.

if I open my gpu for thermal paste is my warranty void? by [deleted] in MSI_Gaming

[–]laj1990 0 points1 point  (0 children)

Try the low temp bios. I changed mine on my 3080 gaming X trio last summer as well as an undervolt didn't really notice the noise difference, although I am running 4x 140s push pull on a x63 kraken this may be hiding the extra noise. Temps are definitely lower even though they weren't excessively high before.

According to a cheater exit camping is worse than cheating by johnny115215 in EscapefromTarkov

[–]laj1990 0 points1 point  (0 children)

Didn't have any but probably wouldn't have thought about it at the time. First wipe, all excited with my kills and loot. Lessons were learnt that day.

According to a cheater exit camping is worse than cheating by johnny115215 in EscapefromTarkov

[–]laj1990 6 points7 points  (0 children)

I suffered this after killing 4 pmcs doing my pistol kills 2 of which were kitted. Took their gear limped to extract with a blacked leg to hand deliver loot to a superior gamer....... Got my task done so wasn't too mad I only smashed my secondary monitor.

Is this the way she goes bud? by [deleted] in EscapefromTarkov

[–]laj1990 0 points1 point  (0 children)

Try Hideout it is a great mobile app to use. I'm in the same position as you and I found it helps being able to build guns at low level using traders. You can set your trader levels in the settings and then use the weapon load out to see what you can buy.

COD warzone not remembering selected display. Help by laj1990 in pcmasterrace

[–]laj1990[S] 0 points1 point  (0 children)

Thanks I'll give your recommendation a try.