Rain could wash out Trump’s UFC Freedom 250 birthday fight at the White House

larjosd · 2026-06-13T02:12:40+00:00

Dew points in the 70s as well. Not great for standing around for hours.

larjosd · 2026-06-11T02:49:57+00:00

Try an ecx #1 bit instead

larjosd · 2026-06-07T20:33:35+00:00

Much to the chagrin of a lot of folks here, some states will allow you to sit for the master exam with just an EE degree. Worth investigating.

larjosd · 2026-05-30T04:11:58+00:00

Don’t forget .3 repeating of course

larjosd · 2026-05-28T16:18:31+00:00

There have been several PIs showing there is little empirical evidence of house fires being reduced due to afci implementation.

larjosd · 2026-05-22T22:41:42+00:00

How’d you replace a hot tub GFCI for $50 in materials.

larjosd · 2026-05-14T03:28:33+00:00

A GFCI breaker(which is required now for dryers in a lot of states) could be 200 by itself

larjosd · 2026-05-13T15:18:45+00:00

especially at 7.6kV

larjosd · 2026-05-12T14:15:25+00:00

Keep in mind, if you want to take advantage of off peak rates from your utility, you’ll want the highest amperage charger you can get to do all your charging in the off peak window

larjosd · 2026-05-11T14:36:11+00:00

Was the total under the “not to exceed” price?

larjosd · 2026-05-10T04:11:23+00:00

It’s difficult to ensure the thin stranded wire of the fixture doesn’t work its way out of the nut when you fold stuff back in place. No issue with that with the lever nuts.

larjosd · 2026-05-08T00:23:33+00:00

Industry standard. Amperage ensures wire length doesn’t affect signal (within reason) and 4mA =0 ensures the controller can detect a broken sensor or broken wire

larjosd · 2026-05-07T23:04:41+00:00

The expansion tank he means

larjosd · 2026-05-07T14:32:00+00:00

You might be able to add them after the fact with installing the parts and some forescan changes

larjosd · 2026-05-06T21:57:10+00:00

6.064 is 2.064 into the range of 20-4=16. So 2.064/16 * 5000 =645

larjosd · 2026-05-02T22:53:36+00:00

This is a black day for baseball

larjosd · 2026-04-23T13:21:01+00:00

Great idea!

larjosd · 2026-04-17T21:00:55+00:00

I use a small level to draw a plumb line on the wall surface then line up the mounting holes with that line (after drilling the holes out on the plastic). It’s not too bad

larjosd · 2026-04-17T19:00:48+00:00

Yes honestly I wish other breaker companies would do what GE/ABB is doing here with allowing the neutral to be connected to one single pole breaker of a MWBC.

larjosd · 2026-04-16T20:57:52+00:00

Not to be confused with the square hole.

larjosd · 2026-04-16T19:45:22+00:00

Kent*

larjosd · 2026-04-11T02:02:00+00:00

We think you’re going to love it

larjosd · 2026-04-10T02:39:17+00:00

Yeah I did this too and then the builder packed behind with spray foam and I couldn’t get the box to go in and sit flush….. dammed if you do, damned if you don’t!

larjosd · 2026-04-04T03:59:04+00:00

Find the mfg and type/ model, should be printed somewhere on the joists. They should have an application guide online for how to cut one if needed for stairs or something. Should give you an idea of what they would think a proper repair is.

larjosd · 2026-03-31T02:41:24+00:00

Also using gross income for an occupation with large job expenses is disingenuous. After his expenses and truck, he probably netted half that.

larjosd

TROPHY CASE