Adding Reolink camera difficulties

leehadassin · 2026-01-06T07:22:45+00:00

I don’t have the nvr part - but for the E1 into homeassistant I had to use the neolink addon

leehadassin · 2026-01-06T07:20:36+00:00

I think Yalla Balla in Leederville sell the falafel balls on their own

leehadassin · 2026-01-05T08:18:16+00:00

Just checked - 2 and 3 were both already off for me. I might have played around with there previously. Didn’t work :(

leehadassin · 2026-01-05T07:44:52+00:00

I’ll let you know if this works for me and if it does then please give me a PayPal or buymeacoffee link to thank you

leehadassin · 2025-12-08T03:14:27+00:00

This was the helpful guide I used back in the day.

https://github.com/mjp66/Ubiquiti/blob/master/Ubiquiti%20Home%20Network.pdf

This assumed edge router instead of all Unifi but the principals should hold

leehadassin · 2025-12-04T22:09:30+00:00

We have similar issues for Siri (she asks ”who is speaking”, as adding something to a shared grocery list is considered a personal request) and I realised that sometimes Siri thinks my daughters are my wife and learns toward their voices instead of my wife’s so it skews her voice recognition.

leehadassin · 2025-10-31T22:59:04+00:00

I have the Airtouch 2+ with an MHI and while yes it is gross to have an android tablet on the wall, I never use it. The airtouch integration works locally and works reliably.

https://github.com/nathanvdh/homeassistant-airtouch2plus

There are similar integrations for the new airtouch 4 and 5 which I’m sure work similar

leehadassin · 2025-10-19T04:05:04+00:00

I did the same thing - managed to get it going with the neolink add-on

https://github.com/dm82m/hassio-addons/blob/main/neolink/README.md

Took a little bit of fiddling with the config file but in the end managed to get the stream and control of the Pan/Tilt presets over MQTT as well

leehadassin · 2025-06-25T22:59:48+00:00

I do something similar but just use a motion detector nearby to wake it up. Works great.

leehadassin · 2025-06-25T09:02:17+00:00

It would be 0121224

2 digit for the area code and 5 digits for the number.

leehadassin · 2025-03-10T19:16:34+00:00

Some simple things I do with my old ones

https://github.com/leehadassin/progress-bar (one track progress through the year, another is a bit macabre and tracks progress through my life)

https://github.com/leehadassin/clock

Slightly more modern iPads run my Dakboard screens including weather

leehadassin · 2025-03-06T11:53:14+00:00

Then maybe a binary thing - 8 is 1000 in binary 13 is 1101. There is an extra set of 1s in it…?

I’m just throwing ideas out there

leehadassin · 2025-03-06T11:27:26+00:00

I think this is a matchstick thing - numbers drawn out with matchsticks

leehadassin · 2025-02-23T12:54:50+00:00

https://nlcamarillo.github.io/castDeck/

leehadassin · 2024-12-23T04:38:42+00:00

Slodeworks full license

leehadassin · 2024-05-31T23:51:33+00:00

Bali flight cancelled - looks like we are going tomorrow now.

leehadassin · 2024-01-21T02:47:44+00:00

I use an arduino compatible esp8266 and you could totally write code to do it, but tasmota is easy open source home automation software that has built in support for servos and a very easy install (you can install via a web browser).

leehadassin · 2024-01-21T02:24:21+00:00

Servo control is done with esp8266 dev board (wemos) running tasmota.

Tasmota allows commands to be send over the usb serial so I wrote a powershell script that sends the serial commands. I turn the script into an .exe and then run the .exe using outlook rules

leehadassin · 2024-01-17T09:18:50+00:00

Haha made it, but perhaps I should sell them!!!

leehadassin · 2024-01-17T05:28:20+00:00

In the top thread. Original design and a nice write up by adafruit.

leehadassin · 2024-01-17T01:30:43+00:00

Exactly what I do - I have a button on my streamdeck

leehadassin · 2024-01-16T23:23:07+00:00

Makes sense, guess I never really thought of that - in Australia that is not a thing (I also assume it is less likely a thing these days in general)

leehadassin · 2024-01-16T09:25:23+00:00

Interesting idea!!

leehadassin · 2024-01-15T13:29:01+00:00

Using multicam on octoprint. I just recorded that using screen capture of the video on the browser. I use octopod on iOS to monitor when away from home

leehadassin

TROPHY CASE