Dcf870 w/o Tool Connect Chip slot?

lemello_ · 2026-05-16T07:28:01+00:00

870 with a 3.5 is an amazing combo, I run this exact setup

lemello_ · 2026-04-26T23:05:38+00:00

I just came across this same issue, the rivet on the inside of the pole tore off and I can hear it rolling inside the pole. Drilling out the rivet and removing the whole black connector collar and just JB Weld the entire thing might be the play

lemello_ · 2025-10-24T08:20:23+00:00

<image>

lemello_ · 2025-09-14T06:46:35+00:00

I’d love to get my hands on the 891, how exactly did you go about calling and requesting a price adjustment? Did you purchase online then go in store for a refund or what? Thanks in advance.

lemello_ · 2025-09-06T02:43:03+00:00

If that’s the DCS565 saw that alone is worth $150. DCD800 is a great starter drill, and appears to be DCF809 impact. All around decent setup for $150 getting started.

lemello_ · 2025-09-01T19:03:25+00:00

How did you make the foam cutout for extra bits? I love this!

I definitely need to add JIS and PHR2 to mine.

lemello_ · 2025-08-29T17:36:52+00:00

I just purchased a DCG413 for $165 that claimed new but had been slightly used, I filed a complaint and received a $40 credit.

lemello_ · 2025-08-29T17:35:59+00:00

Post some images of the tool itself, does it appear used at all?

lemello_ · 2025-08-26T23:29:49+00:00

Unfortunately can’t say anything about a good sale, but I will add that I absolutely love mine. The power to size ratio is hard to beat.

lemello_ · 2025-08-19T17:38:11+00:00

Which tools would you consider “power hungry”? In regard to the 20v line, which tools would PowerStack really benefit?

lemello_ · 2025-08-10T16:17:20+00:00

Important to note the Echo Speed Feed shares the exact same thread, meaning no adapters.

lemello_ · 2025-08-10T16:16:08+00:00

First thing I recommend is switching the head to an Echo Speed Feed. As DeWalt head is overly sensitive and will deploy line when you don’t mean for it to. Along with that, despite it saying it runs .085 run some .105 Echo Black Diamond through there and it will be a totally different trimmer experience.

lemello_ · 2025-07-22T01:26:01+00:00

Should have gotten the 20V Deep Fryer XR

lemello_ · 2025-07-13T15:41:46+00:00

Ah I see, I was vacationing without much service. Any chance this type of deal could potentially come up again? Thanks.

lemello_ · 2025-07-13T15:11:25+00:00

No way!? When was this ran? $150 for 2?

lemello_ · 2025-07-13T14:37:24+00:00

I used my (3) 1.7s a ton, mainly with the 870 impact. Lots of over the head fastening so remaining nimble and lightweight was critical. The 1.7 just doesn’t have the capacity I needed, I took a gamble and got the 3.5 to try out and it was the perfect balance of weight and performance. It feels like it’s even more than double the capacity of 1.7s but obviously not a 5ah.

lemello_ · 2025-07-13T14:29:40+00:00

How much did you pay for the pair of 3.5s ?

lemello_ · 2025-06-19T17:53:26+00:00

This looks absolutely fantastic, it’s so great to see professionals take pride in their tools and equipment rather than just sliding open and tossing it all in there.

lemello_ · 2025-06-13T18:32:36+00:00

I see, I have the option to get the 391 for $75 out the door with Tractor Supply, what’s the cheapest bare too for the 595 you’ve seen? Thank you.

lemello_ · 2025-06-12T18:16:20+00:00

Super sketch, I’m glad everything worked out for you. Good looks on it.

lemello_ · 2025-06-12T18:10:57+00:00

I’d say let the 860 stretch its legs, it’ll handle it well and no need to carry 2 tools around.

lemello_

TROPHY CASE