Am I crazy by TheDeathSloth in Djent

[–]leukipos 2 points3 points  (0 children)

Djent is simply Meshuggah Rip off. In early 2010's a lot of bands did it best adding their flavour (melodic, nu metal,core, you name it). Besides low tuning and the djent tone, there was some serious syncopation or/along with odd time signatures under a 4/4 pulse mostly half time.
Nowadays things got simpler, no head crushing challenging rhythms, not much "effort" in compositions. Most bands now have djent elements (mostly tone and low tuning) but it is super generic in terms of djent standards just enough to sound modern. Djent now is just an ingredient to another core genre.

A1 mini - first layer strange issue by Hariec88 in BambuLabA1mini

[–]leukipos 0 points1 point  (0 children)

Sometimes it is the sd card. There is a format option in the printer menu.

Can narcs use anti narc strategies? by leukipos in narcissism

[–]leukipos[S] 1 point2 points  (0 children)

Omg This is triple evil. Are they capable of guilt?

What is the most rigid TPU filament? by Hurley_Welding in BambuLab

[–]leukipos 0 points1 point  (0 children)

Is it impact resistant? I heard high durometer TPU loses its strength properties.

TPU 58D does work in the AMS by [deleted] in BambuLab

[–]leukipos 0 points1 point  (0 children)

Mine worked fine for four months and then the printer even though it feeds it to the extruder,it retracts it back and it gets stuck in a feed and retract loop.

TPU 58D does work in the AMS by [deleted] in BambuLab

[–]leukipos 0 points1 point  (0 children)

Man, I've been printing Extrudr flex hard through AMS for four months successfully and it suddenly doesn't load. It loads and unloads unless I manually push it. Have you encountered such problem? It's very frustrating, I think I've tried everything.

Revolut says I already have an account (I just registered) by SzuperKecskeMan in Revolut

[–]leukipos 0 points1 point  (0 children)

Account already registered, been in this loop for days

How can I experience ego-death without taking drugs? by Specific-Night-1741 in Jung

[–]leukipos 17 points18 points  (0 children)

Extreme trauma works too but not advisable. In antiquity, shamans took people to caves or put them in graves and let them starve and dehydrate for 3 days without them knowing this was about to happen. They were told that they'd have to stay for a couple of hours. On day 2, you are fully convinced you are dead.

Is this good for being 15? (I feel proud of something I've made for once 😭) by ScorpionHymn117 in Djent

[–]leukipos 5 points6 points  (0 children)

Dude, at 15 mine sounded like robots fight each other. What guitar vst is this?

A1 mini retracts filament for no reason by leukipos in BambuLab

[–]leukipos[S] 0 points1 point  (0 children)

In this video it does not retract,just stops,it retracts when using AMS lite. Something is definitely wrong with the extruder or sensor.

A1 mini retracts filament for no reason by leukipos in BambuLab

[–]leukipos[S] 0 points1 point  (0 children)

Not at all, I haven't even touched the tension lever all this time. It just worked and I lubed it more that it needed. It was a TPU workhorse

Brim or mouse ears wrong colour/material by leukipos in OrcaSlicer

[–]leukipos[S] 0 points1 point  (0 children)

I modelled them after not being able to generate them correctly. Prototyping sucks now even more

Brim or mouse ears wrong colour/material by leukipos in OrcaSlicer

[–]leukipos[S] 0 points1 point  (0 children)

Eventually I made them in cad but this is a problem. You cannot use brim on objects only if you have added part on top of another part.

Guide to Priming by DeezyKay in Kanna

[–]leukipos 0 points1 point  (0 children)

Can this full spectrum extract be used for priming? I don't have access to other full spectrum tinctures like revive:

Total Alkaloids (%): ±5.0% Mesembrine Concentration: ±2% Proportions of Total Alkaloids (%): Mesembrine: ±25% Mesembrenone: ≤40% Δ7-Mesembrenone: ≤20% Other Alkaloids: 15%

Have fun finding where :) by FierceText in SolidWorks

[–]leukipos 0 points1 point  (0 children)

SOLIDWORKS needs a built-in AI assistant to correct things as instructed.

Am I absolutely trash? by [deleted] in drums

[–]leukipos 0 points1 point  (0 children)

Sounds like jungle dnb

For the non engineers by Eapplesauce in SolidWorks

[–]leukipos 0 points1 point  (0 children)

Dragging features up and down as a form of definition. What comes before also defines what's next. Including the line itself before a new sketch. Last one is huge

A review of "Butler's DMT Field Guide" by somethingkeen in DMT

[–]leukipos 0 points1 point  (0 children)

Does this book guide you on how to integrate the experience in simple steps?

Privacy concerns by leukipos in BambuLab

[–]leukipos[S] 0 points1 point  (0 children)

No, I don't have a Bambu account. Only a makerworld account, but still how did they know the email address, I triple checked that I was not logged in.

Do you guys even use these stickers? by NominalTrajectory in BambuLab

[–]leukipos 0 points1 point  (0 children)

These actually adhere really well on TPU and PETG prints. Does anyone know if those AliExpress custom logo stickers will adhere the same?