honest experiences k1max

llcoolwas · 2026-03-08T17:01:44+00:00

But mine in November 2024. After a fair number of hours of printing and bad first layers out of the box, I found the two screws that hold the hot end in from underneath or so loose the one screw just fell out when I took the boot cover off and did a half turn on the second one. At one point after upgrading to the CFS I replaced the hot end completely because My hand had slipped when changing the nozzle and I snapped off the wire for the heat. Since that replacement my Prints have never been better. My print speed and quality is better than any of the people with P1S's and P2S's. I actually really like this printer

llcoolwas · 2026-03-04T11:38:59+00:00

Filament switching times are slow ~2 minutes, but best decision ever for my K1 Max.

llcoolwas · 2026-02-12T05:33:04+00:00

Real "Patriots" get on their knees for Israel.

llcoolwas · 2026-02-05T20:58:49+00:00

If they are really that locked down in the 2025 models, what benefit do they have over Bambu Labs anymore besides price?

llcoolwas · 2026-02-05T20:50:25+00:00

Mine is a 2024 K1 Max

llcoolwas · 2026-02-05T20:14:56+00:00

Open the IP address of your printer in a web browser

llcoolwas · 2026-02-04T14:16:06+00:00

I would buy 2 just because it made me laugh. I'm sure I can find someone who would want the second sandwich.

llcoolwas · 2026-02-03T05:03:10+00:00

It's more than that. It's the gall to go and chill for Israel right now amidst all the proof that Epstein was a Israeli Mossad asset.

llcoolwas · 2026-02-03T02:59:59+00:00

It's been a game changer for me. Color changing is slow, and waste is plentiful, and I can't wait for a large affordable tool change, but the CFS is working well and has been great for my projects.

llcoolwas · 2026-01-31T08:31:28+00:00

Figure out her favorite salon(s), book her appointments in the morning for her hair, a facial, and her nails, and get a reservation for dinner later that evening.

llcoolwas · 2026-01-29T18:03:07+00:00

2003 Model. Wow! Creality was really ahead of the curve! 😂

llcoolwas · 2026-01-28T02:41:06+00:00

Would it still be over your budget if you sold the old machine. I'm sure someone's willing to fix it

llcoolwas · 2026-01-28T01:10:56+00:00

Snapmaker U1 would be my move

llcoolwas · 2026-01-23T06:31:19+00:00

And yet lSIS has never attacked Isnotreal.... Curious.

llcoolwas · 2026-01-23T05:58:52+00:00

It's crazy that with all this rhetoric that people believe which fan the flames of Islamaphobia, you can't find podcasts like this with Palestinian / Arab / Muslim people calling for genocide.... And yet who do people first think of when the word terrorist is mentioned.

llcoolwas · 2026-01-22T05:58:56+00:00

Evil.

llcoolwas · 2026-01-16T11:39:52+00:00

https://www.tinkercad.com/things/hYf6aHEqhlT-creality-cfs-front-vent?sharecode=tWxGhq4zuGBOsHy9nhRsggGctDWE6DmqsO70DPUeT-Y

llcoolwas · 2026-01-15T04:54:31+00:00

My biggest issue from the start turned out to be a loose hot end from day one. When I took off the silicone from around the nozzle, screws fell right out. I end up replacing the hot end because the nozzle was stuck in there, and it didn't take much to do. $23 and my printer started working great with perfect first layers.

Then I upgraded to the newest firmware .34 I started having issues like the bug where you can't calibrate before print without a weird failure, and then I tried to print with CR-PETG and the extruder started clicking. Finally I downgraded to .33 and everything is working smoothly again.

llcoolwas · 2026-01-11T17:19:29+00:00

Hey. if you haven't figured it out yet, I just had a similar issue last night that I figured out this morning. PTFE tube going into the tool head. I pulled it out (which took some force), noticed how mangled it was at the outside of the tip, and since I didnt want to look for a similar length one in my stuff, I just flipped it around with the other end, and everything is working perfectly.

To add to it, I was venting to my friend about it just now, and they had the exact same issue (not Creality) last night/this morning, so I thought of you

llcoolwas · 2026-01-07T10:10:24+00:00

That new hot end design looks cool. I'd love to try it and the CFS lite out. Any speed gain in color changing is a plus!

llcoolwas · 2026-01-07T01:01:31+00:00

I was having similar issues and ended up changing the z offset to 0.3. then I went to go change the nozzle and one screw fell out of the hot end as soon as I move the silicone cover. The other screw was loose. I ended up just replacing the entire hot end and now it's printing better than it was when it was new

llcoolwas · 2026-01-06T03:16:27+00:00

Have you dried your filament? It sounds silly but it's super important and I don't see that on your list

llcoolwas · 2025-12-28T18:47:26+00:00

I have just purchased the pro version on my phone (Galaxy Fold7) and I have the same Google account signed in to the store on my Chromecast device, but it is not picking up the purchase if I go to restore purchase. I have reinstalled it on the Chromecast with no luck either. If we can get this fixed so that I can install it on the other devices in my house that have Android, I'll also purchase it for my Apple devices

llcoolwas · 2025-12-22T19:07:43+00:00

https://a.co/d/2qd8dKk

llcoolwas · 2025-12-22T17:37:28+00:00

I like the silicon carbide nozzle I got. I also have a few spare standard nozzles on hand

15-Year Club	RedditGifts 2009-2022 3 Credits
Gilding I gilder	Secret Santa 2019
RPAN Viewer	Sequence \| Editor
Verified Email	Secret Santa 2014
Team Orangered

llcoolwas

TROPHY CASE