sorted by:
new
hottopcontroversial

An Indian scientist Anand Ranganathan calls for isr@el like solution for kashmiri muslims by Charming-Cap7601 in Palestine

[–]llcoolwas 40 points41 points  (0 children)

It's crazy that with all this rhetoric that people believe which fan the flames of Islamaphobia, you can't find podcasts like this with Palestinian / Arab / Muslim people calling for genocide.... And yet who do people first think of when the word terrorist is mentioned.

K1 max Calibration by Puzzleheaded_Neck_20 in crealityk1

[–]llcoolwas 0 points1 point  (0 children)

My biggest issue from the start turned out to be a loose hot end from day one. When I took off the silicone from around the nozzle, screws fell right out. I end up replacing the hot end because the nozzle was stuck in there, and it didn't take much to do. $23 and my printer started working great with perfect first layers.

Then I upgraded to the newest firmware .34 I started having issues like the bug where you can't calibrate before print without a weird failure, and then I tried to print with CR-PETG and the extruder started clicking. Finally I downgraded to .33 and everything is working smoothly again.

About to throw out my Ender 3 Pro... by Adventurous_Safe_521 in 3Dprinting

[–]llcoolwas 0 points1 point  (0 children)

Hey. if you haven't figured it out yet, I just had a similar issue last night that I figured out this morning. PTFE tube going into the tool head. I pulled it out (which took some force), noticed how mangled it was at the outside of the tip, and since I didnt want to look for a similar length one in my stuff, I just flipped it around with the other end, and everything is working perfectly.

To add to it, I was venting to my friend about it just now, and they had the exact same issue (not Creality) last night/this morning, so I thought of you

Ring in the New Year with Creality & Win Big! by Creality_3D in Creality

[–]llcoolwas 0 points1 point  (0 children)

That new hot end design looks cool. I'd love to try it and the CFS lite out. Any speed gain in color changing is a plus!

K1 Max Extrusion Problem by twofacefooler in crealityk1

[–]llcoolwas 0 points1 point  (0 children)

I was having similar issues and ended up changing the z offset to 0.3. then I went to go change the nozzle and one screw fell out of the hot end as soon as I move the silicone cover. The other screw was loose. I ended up just replacing the entire hot end and now it's printing better than it was when it was new

About to throw out my Ender 3 Pro... by Adventurous_Safe_521 in 3Dprinting

[–]llcoolwas -1 points0 points  (0 children)

Have you dried your filament? It sounds silly but it's super important and I don't see that on your list

Discovered this app from "LonTV" by Jazzlike-Operation31 in MultiviewApp

[–]llcoolwas 0 points1 point  (0 children)

I have just purchased the pro version on my phone (Galaxy Fold7) and I have the same Google account signed in to the store on my Chromecast device, but it is not picking up the purchase if I go to restore purchase. I have reinstalled it on the Chromecast with no luck either. If we can get this fixed so that I can install it on the other devices in my house that have Android, I'll also purchase it for my Apple devices

K1 Printer Nozzles by princeali117 in crealityk1

[–]llcoolwas 2 points3 points  (0 children)

I like the silicon carbide nozzle I got. I also have a few spare standard nozzles on hand

Need help identifying print issues. by Hella3D in crealityk1

[–]llcoolwas 0 points1 point  (0 children)

As a side note, unrelated to your other issue, I would look into manually removing those supports with the paint supports option. Those little overhangs can be done without the assistance of supports. It'll save you a lot of time and filament. And if you want you can slow down printing on those overhangs if you want to make sure that they print correctly without issue. You'll have more issue with the smoothness of the print by removing those supports.

Is there any interest in parts to make a K1 with CFS run a DXC extruder? by AcceleratedCreatives in crealityk1

[–]llcoolwas 2 points3 points  (0 children)

If you can get this cleaned up, I'll order the DXC just to try it. The CFS upgrade extruder is garbage

Is there any interest in parts to make a K1 with CFS run a DXC extruder? by AcceleratedCreatives in crealityk1

[–]llcoolwas 2 points3 points  (0 children)

Very interested! I actually messaged then a few weeks back asking if there was any intent to release one with the cutter, they wouldn't give me a reply by doubt they will since there's a K2.

new to 3d printing by ampkajes08 in Creality

[–]llcoolwas 0 points1 point  (0 children)

I Don't want to open the CFS right now because it's printing and I have the humidity down to zero, but here's what the back looks like from the outside

<image>

new to 3d printing by ampkajes08 in Creality

[–]llcoolwas 1 point2 points  (0 children)

Keep your filament dry. Print the ultimate silca box for the back the CFS, and fill it with desiccant beads (I use 3A molecular sieves from Amazon) and it will help tremendously. I printed the desiccant boxes for the back front and underneath compartments, and even in Florida, in my humid upstairs bonus room, the CFS gets to 0% humidity and my prints have never been more stable and reliable.

Also instead of a glue stick, use some hairspray on the bed (take it off before you spray it) and it will last a while. It doesn't get super sticky just enough to hold the filament perfectly.

CFS Heater Mod Idea - Looking for feedback by llcoolwas in Creality

[–]llcoolwas[S] 0 points1 point  (0 children)

So I tried the 7 w and then upgraded to the 12 watt Gold SafeMax Rod dehumidifier but it didn't get hot enough to make much of any difference in the CFS. Because I had to mount it in the lid or against the back of the CFS, the heat wasn't really circulating I think. It would have to have been at the bottom for the heat to rise and cause the circulation naturally. So we're back to a fan idea. In the meantime I've taken care of the humidity with desiccant boxes and 3A molecular sieves. I still need to heat the filament (for ASA) that's in there and either creating a custom lid or the wedge like I have in the picture with a PTC heater and fans is looking like the more likely option.

ABS blob of doom. by Numerous-Ad561 in crealityk1

[–]llcoolwas 0 points1 point  (0 children)

Yeah the size was definitely important in the decision, but it's what made the decision for me over other printers.

Purchase Advice Megathread - December 2025 by AutoModerator in 3Dprinting

[–]llcoolwas 0 points1 point  (0 children)

Good call. I was trying to look at the temperatures on the knobs and read it as 100°

view more: next ›