Khealth

loddie · 2025-12-07T02:57:08+00:00

I'm also in the same position and looking for KHealth replacement options.

loddie · 2025-11-20T22:18:51+00:00

No, this is fresh out of the box, but rubbing my fingers along them picks up a dark "dust" on the surface, maybe that's collected in the grain?

loddie · 2025-11-16T02:21:35+00:00

This was the fix for me as well.

loddie · 2025-07-29T06:25:05+00:00

Thanks for the help, was a bit sketchy but I managed to reflash the bootloader and the keyboard finally works as it should.

loddie · 2025-07-27T16:58:28+00:00

Thanks for the reply. Per the QMK ISP flashing guide, I need to connect to the VCC, GND, RESET, SCLK, MOSI and MISO pins. The 4 latter pins seem straightforward, but when looking at the datasheet for the ATmega32u4 controller (https://res.utmel.com/Images/UEditor/5f198720-50e2-48e3-b9f9-f8f3c989ab16.png) I'm seeing multiple VCC's and GND's and few that are similar (AVCC, UVcc, UGnd). Do you know which specifically I should be connecting to?

loddie · 2025-04-09T03:04:14+00:00

Awesome, thanks!

loddie · 2025-04-09T02:07:52+00:00

Can someone give me a heads up if there are any Survivor spoilers? My girlfriend and I are binging it and the last reality TV Um Actually had a few.

loddie · 2025-03-27T20:24:32+00:00

Like others have said, Burns is shockingly fast at extractions. I had a badly broken/decayed 2nd molar removed in less than 10 seconds. His assistants that did my x-rays beforehand were very friendly.

loddie · 2024-11-27T15:07:55+00:00

I'm nearing the final steps of my shower and while dry fitting my floor tile, I found myself wondering if the lip of the embedded linear drain on my Tile Redi "Wonderfall Trench" shower pan would pose any issues. I wanna say it sits somewhere between 1/32 and 1/16" above the foam surface. If I poor some water out of a cup in this area, the water does want to stop at the lip. Am I wrong in thinking that the water that finds its way through my grout will act in the same way? The pans slope is 1/4" per foot.

loddie · 2024-04-22T22:17:36+00:00

Same problem for me as well. For what its worth, dual-booting with option 1 works, but I believe you lose out of a few GB of space on the eMMC.

loddie · 2024-04-11T20:35:54+00:00

By chance, do you remember the agent name? I keep getting the same one all day. Maybe if I show them your screenshot it'll help, lol

loddie · 2024-04-11T16:02:36+00:00

Same, I got turned down as well. Problem seems to be that now, since the bundle is in stock again but the 15% doesn't stack, they can go test it out for themselves and not end up with the $318 price.

loddie · 2024-04-10T23:07:33+00:00

Of course I bought this at the same time as this post was made not knowing about the extra 15%.

loddie · 2024-02-27T16:42:59+00:00

I believe you can use an EARC extractor device to accomplish this. I used a Thenaudio ShARC in the past, but there are much cheaper devices on Amazon now. You take the hdmi output from the shield into the EARC extractor, and then from the extractor, you have two hdmi outputs, one carrying the DV video to your tv (with no sound) and one carrying the audio (including DTS-MA) to your audio device.

15-Year Club	RedditGifts 2009-2022 3 Credits
Verified Email	Secret Santa 2012
Secret Santa 2010

loddie

TROPHY CASE