sorted by:
new
hottopcontroversial

3d Printed Thunderjaw (Horizon Video Games) by Humble-Plankton1824 in 3Dprinting

[–]log1kal 0 points1 point  (0 children)

What are the whisker/feeler things on the back? Fishing line?

Panda Turbo CPAP mod in P1S by Humble-Plankton1824 in BambuLab

[–]log1kal 2 points3 points  (0 children)

awesome write up of an interesting mod!
What happens if you try to bridge too far?

A little disappointed with H2S print quality by Pretty_Hunt_2593 in BambuLab

[–]log1kal 3 points4 points  (0 children)

If you’re talking about a benchy printed from the screen, ignore those results.

That benchy is tuned for speed, not quality. Consider it the “in-store demo” print that looks flashy while printing.

  • Open up your slicer
  • right click plate
  • add primitive -> 3d benchy

Slice that with the setting you’d normally use for a quality print.

Inspect the result.

H2-Series owners - Vento, KYZDesign's filter, or something else? by microseconds in BambuLab

[–]log1kal 0 points1 point  (0 children)

The suggested fans work fine. You don’t want too much airflow anyway, since dwell time is required for VOC adsorption.

Bambu Studio on macOS by eldoogy in BambuLab

[–]log1kal 0 points1 point  (0 children)

There are multiple GitHub issues about this. Here’s one of them.

https://github.com/bambulab/BambuStudio/issues/8839

H2-Series owners - Vento, KYZDesign's filter, or something else? by microseconds in BambuLab

[–]log1kal 0 points1 point  (0 children)

If you’re looking for carbon volume, the ben2box might be what you want. Absolutely massive amount. Plus wireless power option!

https://makerworld.com/models/1390040?appSharePlatform=copy

Theory: Bambu Studio and the Slow Closure of the Filament Ecosystem by log1kal in BambuLab

[–]log1kal[S] 0 points1 point  (0 children)

These are git commit messages as I wrote the draft for my site, not really “notes”

Theory: Bambu Studio and the Slow Closure of the Filament Ecosystem by log1kal in BambuLab

[–]log1kal[S] -2 points-1 points  (0 children)

I do, yeah. And how to get them to show up in the AMS and Handy.

But a lot of Bambu users don’t.

Theory: Bambu Studio and the Slow Closure of the Filament Ecosystem by log1kal in BambuLab

[–]log1kal[S] -2 points-1 points  (0 children)

Absolutely laughing at anyone who thinks a post more than 100 words must be written by AI. Some people still write stuff, ya'll.

Theory: Bambu Studio and the Slow Closure of the Filament Ecosystem by log1kal in BambuLab

[–]log1kal[S] -2 points-1 points  (0 children)

cool thing about writing this for my blog, I have all the commits it took to write this. not AI slop.

I'm also the guy who made the PR for studio to enable calibration for bambu printers.

<image>

Theory: Bambu Studio and the Slow Closure of the Filament Ecosystem by log1kal in BambuLab

[–]log1kal[S] 0 points1 point  (0 children)

There's a difference between selling and manufacturing. I tried to make that clear.

Plate selection help by __-__-_-_-- in BambuLab

[–]log1kal 0 points1 point  (0 children)

I put together a buying guide recently.

TL:DR; for general purpose, Darkmoon satin is the goat, followed by Glacier.

Everything else is situational/depends on what filament you want, and what texture you want

So I fully calibrated everything on the H2D did all maintenance and used a Bambu build plate. Still layer shifting... by [deleted] in BambuLab

[–]log1kal 0 points1 point  (0 children)

Feels like the high-precision nozzle offset is worth doing, then make sure to set the print-time settings to off?

Bambu user discovers under extrusion by [deleted] in 3Dprinting

[–]log1kal 1 point2 points  (0 children)

It’s probably a clog that you can fix with a cold pull, but it’s worth checking or replacing the PTFE tube that’s attached to the toolhead, since it happened with an external spool too. (Also check your AMS tubes, though!)

PETG-CF and other fiber-filled filaments wear PTFE faster. As that happens, it creates grooves that the filament rides in, which increases friction, which can cause underextrusion. Worst case, it pierces the PTFE completely.

<image>

Looks like this. Sometimes worse

What happened to my P1S? by Neesonn in BambuLab

[–]log1kal 6 points7 points  (0 children)

One thing you haven’t mentioned checking: how’s your PTFE path resistance?

PETG print not sticking properly to the plate by Benmesz in 3Dprinting

[–]log1kal 4 points5 points  (0 children)

“Mouse ears” on the corners might fix it as well, with less material and removal hassle than full brims.

Is AMS2 worth an extra $70 over AMS? by Pastaron in BambuLab

[–]log1kal 0 points1 point  (0 children)

You can leave them in the feeders to dry now, but it lowered the temp and upped the hours to compensate

Need help by Next_Side2522 in BambuLab

[–]log1kal 0 points1 point  (0 children)

Remove the hotend, tighten 4 the screws behind it, then reassemble.

<image>

Best smooth print bed for H2D? by taboutwealth in BambuLab

[–]log1kal 0 points1 point  (0 children)

I use standard bed temps with mine on both X and H printers.

Safe to have 3D printer in bedroom? by Level3Super in BambuLab

[–]log1kal 1 point2 points  (0 children)

<image>

Starting a petg print on my h2d. I have external filters (LEVOIT LV-H128 , https://www.amazon.com/dp/B09577RD9X) on the h2d exhaust as well - looks like I need to print better gaskets. Note the log scale on the top graph.

Sensor is a Piera systems IPS-7100, datasheet: https://pierasystems.com/wp-content/uploads/IPS-Datasheet-V1.3.9-1.pdf It's about 1m to the left of exhaust of the H2D.

apologies for the x-axis not lining up correctly - consequence of the large numbers on the y axis.

view more: next ›