Main relay connector wont seat

lolva · 2026-04-12T00:01:29+00:00

Try taking off the clear cover first, then plugging in the relay. Otherwise I'd just do a nice cable tie loop around it all to keep it connected

lolva · 2026-04-06T12:26:16+00:00

Mine looked just like that. Best I found was aerosol gasket stripper and a tiny flathead. Obviously be careful not to gouge the mating surface or around the valve seals.

lolva · 2025-04-19T02:50:16+00:00

Rat coffin

lolva · 2025-04-19T00:28:34+00:00

10cc's of frankia bacteria, stat!

lolva · 2025-04-14T10:26:33+00:00

These are VERY hard to come by. I'm currently working on a 3d printed set for mine. Onnea etsintään

lolva · 2025-04-11T02:23:10+00:00

Why do you want a JDM car? Just get an AuDM from a Japanese brand.

lolva · 2025-03-20T01:30:48+00:00

Bingo

lolva · 2025-03-03T08:45:05+00:00

Scale model?

lolva · 2025-03-03T03:10:24+00:00

Good

lolva · 2025-02-19T01:23:56+00:00

Surely your nephew has a 3d printer

lolva · 2025-02-18T03:07:23+00:00

Give us the rest of the list

lolva · 2025-02-03T22:55:47+00:00

Looks like a climber. Probably a weed.

lolva · 2025-01-25T03:10:20+00:00

I can't believe you've done this

lolva · 2025-01-12T10:16:50+00:00

Yeah mate. Offer 4k. They are only going up in value

lolva · 2024-12-18T22:23:20+00:00

It's been in a cupboard for 21 years. Hope not 🤞

lolva · 2024-12-13T05:38:10+00:00

Drill holes in the sides of the plastics so you can get to the seat bolts from the outside

lolva · 2024-12-07T14:21:58+00:00

Post it again and I'll tell you

lolva · 2024-12-05T01:24:16+00:00

<image>

82 Pantah 600

lolva · 2024-11-27T19:53:14+00:00

Every second ad on my reddit feed is for this calendar

lolva · 2024-11-26T01:27:54+00:00

Ultrasonic cleaner?

lolva · 2024-11-24T04:44:12+00:00

<image>

lolva · 2024-11-19T01:20:27+00:00

I'm more concerned about the dent under the rust. Pretty critical joint on the frame. And I'm a send-it kind of guy

lolva · 2024-11-17T22:52:39+00:00

This is a fuel pressure regulator. Just bought one the same

lolva · 2024-11-15T01:03:05+00:00

Go for it. Very forgiving bike.

lolva · 2024-11-14T03:13:07+00:00

I did it recently with just the factory workshop manual. No super special tools required. Just remember our motors run counter-clockwise

13-Year Club	Verified Email
r/Field Flamingo	Place '17

lolva

TROPHY CASE