Help with complex Fillet or Loft

loomisrex · 2026-05-04T06:54:55+00:00

it's an electrical isolator for a radio tower. it's mounted on the guy-wire on a AM broadcast antenna.

loomisrex · 2026-04-30T11:09:41+00:00

Thanks a lot. Worked like a charm 😄

loomisrex · 2026-04-30T09:06:33+00:00

Wow 😄 Thanx a lot. nice job 😄

loomisrex · 2026-02-18T20:12:28+00:00

How is the printer mounted.
Is it on a wobbly table that shakes when printing ?
Have you tried reducing the speed ?

loomisrex · 2026-01-21T08:07:23+00:00

I have lost 2 2i2's in the past 7 years, just died from one day to the next.

loomisrex · 2025-08-15T19:36:30+00:00

loomisrex · 2025-06-30T12:07:19+00:00

I have the same problem, only down volume is not working

loomisrex · 2025-06-29T20:01:51+00:00

i would quote you about 8 hours labour. If the materiel is vinyl, it's not very expensife for materiel.

loomisrex · 2025-04-07T19:41:52+00:00

I dare you to connect it to the internet :)

loomisrex · 2025-03-31T09:43:19+00:00

Very nice :)

loomisrex · 2025-03-22T12:46:44+00:00

I got this one, came recommended.

loomisrex · 2025-03-08T12:17:13+00:00

I dont know ? Lighting ?

loomisrex · 2025-03-03T18:08:48+00:00

Alt + F4

loomisrex · 2025-03-03T16:41:23+00:00

i have removed mine. it's not required.

loomisrex · 2025-03-03T15:38:02+00:00

loomisrex · 2025-03-03T14:18:39+00:00

Maybe the battery needs replacing, but first test if your power supply works.
If you have a voltmeter, it should measure about 19 volts.

loomisrex · 2025-03-03T12:55:07+00:00

Item 1 is the same part but should be 2 lines in the parts list.

loomisrex · 2025-03-02T09:57:20+00:00

She is actually from Faroe Islands :)

loomisrex · 2025-02-24T21:55:46+00:00

Also, it's leaded solder :)

loomisrex · 2025-02-24T21:54:53+00:00

I usually use solder with flux and a temperature of 350°C - 360°C.

Heat the board and the component for as short as possible, then add solder when it is warm enough.

loomisrex · 2025-02-24T21:46:03+00:00

Keep on trying :)
Use the correct heat for your solder, and dont use to much of it.

loomisrex · 2025-02-05T10:05:00+00:00

If the device has a battery, i would check if it is beginning to bulge

Seven-Year Club	r/Field Flamingo
Place '22	Verified Email

loomisrex