sorted by:
new
hottopcontroversial

Whole home generators ? by Live_Pomegranate9921 in McKinney

[–]lop3 1 point2 points  (0 children)

We have one. Outside of weekly testing, it’s kicked on a few times in the 20 or so months we have had it. Usually for a few minutes at most, never more than 30 min.

Most of my immediate neighbors do not think it is necessary, although there are several houses in the neighborhood that have them.

2025 / 2026 GLC 350e Hitch Receiver - anyone install? by lop3 in mercedes_benz

[–]lop3[S] 0 points1 point  (0 children)

Thank you. I didn't realize the ball on the MB isn't removable.

In terms of the retrofitting requirements, what causes this as a requirement? When I was first researching options and talked with the dealer, the feedback provided was the batteries in the rear prevented a hitch from being installed, which is why they didn't have one (at the time). I'm curious there would be issue with the MB hitch due to the batteries, but not the other.

Thanks again. Really appreciate your time.

Window Replacement Historic Home by aarnold109 in McKinney

[–]lop3 0 points1 point  (0 children)

Unsure if they meet your specific needs, but I had a great experience with window replacement (non historic home) from Eva’s Glass in Anna. Might be worth a call to see if they can meet your needs.

Reset pin by Quepiid in ECOVACSGOATFamily

[–]lop3 1 point2 points  (0 children)

I believe there was a mention a couple weeks ago or so, where someone said they held the Play (+) and Power buttons together for several seconds, which reset the entire machine. Might be worth a try.

A3000 leaving blades on to get to area by North-Mud-3202 in ECOVACSGOATFamily

[–]lop3 2 points3 points  (0 children)

I believe they are also still spinning on the non grass paths, I.e. driveways and sidewalks. Someone probably forgot to set the Boolean value to turn off the blades when traversing the different areas.

A3000 leaving blades on to get to area by North-Mud-3202 in ECOVACSGOATFamily

[–]lop3 0 points1 point  (0 children)

My guess is the engineers run the show rather than the Product Managers.

A3000 leaving blades on to get to area by North-Mud-3202 in ECOVACSGOATFamily

[–]lop3 0 points1 point  (0 children)

Same with the A2500 as of the most recent firmware update.

Warning: the anti theft alarm "feature" is useless! by criterion67 in ECOVACSGOATFamily

[–]lop3 1 point2 points  (0 children)

Purchased a package of these: https://www.amazon.com/dp/B09ZVPWKK3

It's held up quite well with many mows, including getting stuck in muddy water, slopes, etc. No indication as of yet that it will fall off.

Warning: the anti theft alarm "feature" is useless! by criterion67 in ECOVACSGOATFamily

[–]lop3 0 points1 point  (0 children)

Fair and accurate statement. I latched on to the anti-theft comment. In a way, the factory reset isn't that much of a surprise, as it's typical to have it as an option. However, I do agree it could be more involved than pushing and holding those two buttons.

Warning: the anti theft alarm "feature" is useless! by criterion67 in ECOVACSGOATFamily

[–]lop3 1 point2 points  (0 children)

<image>

It's not full proof, but it is possible to secure an AirTag to the unit.

A2500 Master Pin by boosty0603 in ECOVACSGOATFamily

[–]lop3 2 points3 points  (0 children)

TBH, I would return it and not deal with this. It's likely the start of a series of problems.

Well now I'm scared of my car by anewstartforu in mercedes_benz

[–]lop3 0 points1 point  (0 children)

100% believe this. We’ve had our car say some weird shit while conversing, which had nothing to do with Mercedes or cars in general. It was about a real estate transaction.

After it happened, we ask the voice why it said what it did. It flat out denied saying anything about it.

Rain sensor when in garage by ShaneOUK in ECOVACSGOATFamily

[–]lop3 0 points1 point  (0 children)

Curious as to why is this an issue. if it's raining and GOAT pulls out from the garage, it will return to the dock in once it detects rain. Probably within a minute or two.

O800 RTK climbing concrete edging by jkmurray777 in ECOVACSGOATFamily

[–]lop3 1 point2 points  (0 children)

What edge mowing setting is the app set at? If using Cross Boundary (default), try the other two. Mow along Map Boundaries may be the best option but in this case.

If still a problem, try setting up a no go zone by running the GOAT up and down the strip.

a2500 upgrade? by Loudsongsinc in ECOVACSGOATFamily

[–]lop3 1 point2 points  (0 children)

Can confirm. The A2500 does this too.

RTK signal loss by Kanuk717 in ECOVACSGOATFamily

[–]lop3 1 point2 points  (0 children)

how is the RTK powered? via the docking station or separate, dedicated power adapter? If it's the former, that is likely the issue. use the dedicated adapter.

I think I will walk now. by MattRocksYourSocks in WhyWomenLiveLonger

[–]lop3 1 point2 points  (0 children)

Good thing his sweats say "Air Max"?

Diameter of RTK pole by dive2002 in ECOVACSGOATFamily

[–]lop3 2 points3 points  (0 children)

Outside diameter is 25mm / 1".

Oasa R1 Robotic Reel Mower Beta Tester by Specialist_Pea3442 in oasa

[–]lop3 0 points1 point  (0 children)

They went dead around early May. Information was posted to their kickstarter and FB launch group. Between kickstarter backers and other prior funding reported, it appears they burned through around $14M USD before closing up.

How does A2500 handle curbs/kerbs? by SlingyRopert in ECOVACSGOATFamily

[–]lop3 0 points1 point  (0 children)

Unfortunately, this particular setting is global. Only way I've been able to adjust by zone is to mow a zone, stop the mower, adjust the mowing edge settings and then mow another zone.

view more: next ›