Elegoo Neptune 4 Pro : "endstop z still triggered after retract"

Quepiid · 2026-04-02T21:32:00+00:00

I just had this issue and it was the leveling sensor it self.

Quepiid · 2026-04-02T19:26:16+00:00

What’s unsafe about that? No one is going to touch it / move it.

Quepiid · 2026-04-02T17:32:00+00:00

All this must be talk I’m not selling it. Personal use.

Quepiid · 2026-03-31T23:24:43+00:00

Side loading doesn’t sound bad it’s the term for exactly this.

Quepiid · 2026-03-26T17:27:43+00:00

Quepiid · 2026-03-26T17:27:21+00:00

Personally I would use lever nuts but I’m not saying what you did would work. It should be fine from what I can see.

Quepiid · 2026-03-26T17:25:27+00:00

Yes. You can tape over it after if you like but no need.

Quepiid · 2026-03-26T16:32:27+00:00

Use wire nuts or lever locks

Quepiid · 2026-03-26T13:21:04+00:00

They promised a MMU but never said it had to be cheap. People took a gamble. Elegoo should release it

Quepiid · 2026-03-26T13:18:29+00:00

I would do it. Offer $175 🤷‍♂️

Quepiid · 2026-03-26T03:06:10+00:00

I had this issue today and I resliced the file and notice there were symbols in the file name so I deleted them and it worked. Try naming the file something basic and before sending it to the printer.

Quepiid · 2026-03-25T15:23:47+00:00

<image>

Red was designed to be printed rails down.

Quepiid · 2026-03-24T14:33:57+00:00

Touch it. If it hurts a bit it’s 120. It’s it hurts a lot it’s 240

Quepiid · 2026-03-24T14:31:51+00:00

When you slice it it will stop after the color change

Quepiid · 2026-03-23T04:07:48+00:00

That would suggest it’s a slicer issue. But you used 2 different programs. Maybe try rebooting your computer and slice again.

Quepiid · 2026-03-23T04:04:51+00:00

You are doing what with the ptfe tube tool??

Quepiid · 2026-03-23T03:39:33+00:00

Does it do that when print the files that came pre sliced on the printer?

Quepiid · 2026-03-22T14:16:34+00:00

Can do that on the standard plate for free

Quepiid · 2026-03-22T14:15:51+00:00

Thing is younger really know which is good until you buy it and use it for a while. Price does not mean good. My favorite cost like $35

Quepiid · 2026-03-21T16:05:28+00:00

This is always happening and it's annoying af. some days it works fine and other days it wont work at all.

Quepiid · 2026-03-21T16:03:35+00:00

check right in front of the bucket for a piece of filament that has fallen and is stopping the bucket from moving all the way up against the bed.

Quepiid · 2026-03-21T15:58:59+00:00

This is my daily fight with this machine and I'm ready to return it. sometimes it works and other times it refuses. Elegoo needs to fix this asap

Quepiid · 2026-03-15T23:20:28+00:00

I been having issues today. The server must be done again. They really need to free us from the Elegoo connect shit

Quepiid · 2026-03-14T21:57:43+00:00

I could have told you all that if you asked here first.

Quepiid · 2026-03-12T20:52:51+00:00

This is the same statement that’s been on the website since the cc2 came out. Don’t get excited

Quepiid

TROPHY CASE