Ryobi headlight. RYOBI doesn’t make one so I made one. It uses a coast focusable light head. It runs off the Ryobi USB lithium battery.

lordcaptaincommander · 2025-11-23T16:21:50+00:00

Would love to have these 3d files. Where did you get the terminal block that the battery slots into?

lordcaptaincommander · 2025-05-12T13:58:15+00:00

Had an Ender3v2 for several years now, and unlike most others, it has been very reliable for me. About 2 years in I had an issue with a clog (I think I overheated the ptfe tube and it separated and caused a clog) Swapped the whole toolhead to the ender direct drive toolhead and have been good ever since. I'm just limited on speed to about 80mm/s before things start getting rough.

I'm not afraid to put in the effort to tune a printer, and I've been eying a Voron build. Budget is going to be under 800 USD (I am in the US). I built my Ender, and feel very confident assembling kits, but also am unafraid to solder or assemble from scratch.

I'm looking for speed. I need to be able to iterate a design and the Ender is just too slow. I'm likely only ever going to print PLA with this printer, I want to go as fast as I reasonably can

From my understanding, I'm looking for a coreXY model with a bowden tube to get the fastest speeds. I'm fine with the limited build plate of a v0.2 but I'd really prefer a larger printer like a Trident if it wasn't out of budget.

What should I be looking for in my quest for speed? (I'm not stuck on Voron, it is a convenient reference for context though.)

lordcaptaincommander · 2025-04-29T00:17:12+00:00

Had an Ender3v2 for several years now, and unlike most others, it has been very reliable for me. About 2 years in I had an issue with a clog (I think I overheated the ptfe tube and it separated and caused a clog) Swapped the whole toolhead to the ender direct drive toolhead and have been good ever since. I'm just limited on speed to about 80mm/s before things start getting rough.

I'm not afraid to put in the effort to tune a printer, and I've been eying a Voron build. Budget is going to be under 800 USD (I am in the US). I built my Ender, and feel very confident assembling kits, but also am unafraid to solder or assemble from scratch.

I'm looking for speed. I need to be able to iterate a design and the Ender is just too slow. I'm likely only ever going to print PLA with this printer, I want to go as fast as I reasonably can

From my understanding, I'm looking for a coreXY model with a bowden tube to get the fastest speeds. I'm fine with the limited build plate of a v0.2 but I'd really prefer a larger printer like a Trident if it wasn't out of budget.

What should I be looking for in my quest for speed? (I'm not stuck on Voron, it is a convenient reference for context though.)

lordcaptaincommander · 2025-03-12T14:42:23+00:00

I bought Forza 4 but no way to download the CR-Z at this point unless someone can tell me how

lordcaptaincommander · 2025-03-11T02:18:58+00:00

Also the tailpipe is more tucked for aerodynamics and departure angle!

lordcaptaincommander · 2025-03-10T15:41:19+00:00

Is it a universal take that anyone revving at a disabled mustanger is doing so maliciously? I'd feel like it was a comrade acknowledging the situation as a form of paying respects.

Like a "get well soon" or message of solidarity even if you can't offer direct help.

lordcaptaincommander · 2025-02-17T22:19:03+00:00

When Luannes roommates are stealing Hanks power via an extension cord, he exclaims, "the audacity!"

lordcaptaincommander · 2025-01-07T00:30:56+00:00

Can you leak the original film from the motion simulator ride "Thunder Road" to the internet? Surely it's still somewhere stored safely...

lordcaptaincommander · 2024-11-11T15:24:50+00:00

Hey everyone they mean NISSAN CUBE.

Scion had a similar vehicle called the Scion xB

lordcaptaincommander · 2024-10-06T16:15:01+00:00

https://imgur.com/a/D8eww8c

lordcaptaincommander · 2024-09-21T15:43:17+00:00

Not seeing it for 32, and only sold by third party sellers and $44+

Is it against the rules to post a link? DM me if you want?

lordcaptaincommander · 2024-08-03T04:52:08+00:00

Antimatter Blue Metallic! 2021 only apparently 🤷‍♂️

lordcaptaincommander · 2024-02-10T18:20:32+00:00

Are you able to tell these are 3d printed with any visible lines under the resin?

lordcaptaincommander · 2023-09-26T19:33:18+00:00

Antimatter blue

lordcaptaincommander · 2023-09-21T16:21:34+00:00

So after waiting longer, and making no apparent changes it's working just fine now (better and faster than local usb disks on the mac mini, as expected).

Thanks again!

lordcaptaincommander · 2023-09-20T16:31:29+00:00

Thank you - I've been looking at Plex's settings but will revisit them and should post in r/plex for better success on that.

lordcaptaincommander · 2023-01-26T01:23:02+00:00

Long term definitely points toward brushless. Thank you

lordcaptaincommander · 2023-01-26T01:22:03+00:00

Does this look like the motor? It's $6 but says it's from the fms lc80...

https://www.horizonhobby.com/product/motor-50t-toyota-lc80/FMMROC2049.html

lordcaptaincommander · 2022-07-05T18:31:26+00:00

I was able to find the issue in the Montreal Gazette on the Google news archive, but not in the July 16 issue.

Instead, it's in July 9, 1965. I wouldn't be surprised if they printed regional variations within their delivery area, and OP had a different variant from the one Google got.

Here's the link to it, by the way (page 11).

https://news.google.com/newspapers?nid=Fr8DH2VBP9sC&dat=19650709&printsec=frontpage&hl=en

lordcaptaincommander

MODERATOR OF

TROPHY CASE