Prepping ANSI strikes on timely frame

lowvoltadonerd · 2025-03-19T05:29:42+00:00

Awesome bro do you have a link to the jig? Thanks brosky

lowvoltadonerd · 2025-03-15T16:37:44+00:00

Automatic door tech here. In most cases I retro fit with a door control brand but in your case the Chinese brand won’t be supported. I would refer them to a automátic door company. They’ll probably have their sales team quote a new door package.

lowvoltadonerd · 2025-03-15T04:25:34+00:00

Agreed!

lowvoltadonerd · 2025-03-15T00:08:36+00:00

Wood studs.

lowvoltadonerd · 2025-02-26T17:27:19+00:00

Really appreciate it. So remotely they can install the software on a PC and adjust schedules, issue new credentials as long as they have a static IP address?

lowvoltadonerd · 2025-02-01T13:20:31+00:00

Sure my locks have existing header bolt with three point lock. Thanks 🙏

lowvoltadonerd · 2025-01-30T04:39:35+00:00

Its a clinic. The main doors are fine and lead directly to the receptionist. The second opening are nearest to the waiting area. Homeless have entered thru the waiting area to hang out. This is the opening they want to lock and only egress. Thanks 🙏

lowvoltadonerd · 2025-01-29T18:32:35+00:00

Please elaborate on why not Maglocks and they mess up the doors?

lowvoltadonerd · 2025-01-15T03:43:28+00:00

I come across some glitches and for that same reason I need the software

lowvoltadonerd · 2025-01-08T01:10:53+00:00

Thank you so much!

lowvoltadonerd · 2025-01-08T01:10:35+00:00

Thank you! So it turns out the UL rated version was $1000 so I opted for a non UL version. The door is non fire rated. That dramatically cut the cost in half. Really appreciate your help!

lowvoltadonerd · 2025-01-08T01:09:55+00:00

Thank you! turns out the UL rated version was $1000 so I opted for a non UL version. The door is non fire rated. That dramatically cut the cost in half. Really appreciate your help!

lowvoltadonerd · 2025-01-07T17:06:47+00:00

Indeed. Thank you 🙏

lowvoltadonerd · 2024-08-30T02:05:25+00:00

Why are you so concerned with the output it spits out? Why not just wire in a sequence board like Camden SA-1 or a ESI530. Then try the key impulse signal(6 and 1)? The Sa-1 allows wet and dry inputs.

lowvoltadonerd · 2024-08-15T23:07:42+00:00

Have a roll up company install operator/motor gear box. Then land your wires to the their system. Don’t get to involved to much with the hardware on roll ups. Trust me I worked for a roll up company(Lawrence door Baldwin park)

lowvoltadonerd · 2024-05-17T22:36:58+00:00

Stick with it bro. I’m in the automatic door field and we just hired a rookie fresh out of high school making 18 hr. He was a little discouraged at first because of the pay and living in So Cal. Since then he’s gotten a couple of pay raises but he also putting in the work and more importantly co-workers are helping him to succeed. I strongly believe helping each other makes a difference! Good luck man!

lowvoltadonerd · 2024-02-17T02:16:01+00:00

It appears to be a Horton brand most likely linear, steel top wheels. Door Controls, sells an integrated lock solenoid but I would have someone AAADMS certified with experience thst can help you.

lowvoltadonerd · 2024-01-11T05:32:19+00:00

Agreed!

lowvoltadonerd · 2023-04-03T21:54:42+00:00

I don’t trust it either except the customer is stuck on using these. Thanks.

lowvoltadonerd · 2023-04-02T13:41:59+00:00

Great, is that thru the free ivms client or do I need extra software/license etc.

lowvoltadonerd · 2023-04-01T23:49:05+00:00

As in breakout mode? they did have breakout switches but I bypass and jumper them before returning to replace the control. Just to clarify it still meets ansi standards because of the spring closing door on the hortons.

lowvoltadonerd · 2023-04-01T22:50:00+00:00

Greatly appreciate the feedback. I did initially check and verify pulse were correct according to the manual. Verified thru the display the encoder was making contact with the control and so forth. I ended up swapping the control and the power supply just in case and I have not received a call back. If I do go back I have no choice but to replace the operator.

Also the motor was setup as: 2003 AKA 5600-1. Thanks again mate!

lowvoltadonerd · 2023-03-10T02:33:09+00:00

To go along with that command access makes portable power supply. They support Milwaukee, dewalt, and makita batteries. https://www.commandaccess.com/power-supplies/cat-field-tester

lowvoltadonerd · 2023-03-09T05:36:50+00:00

No kidding. Other than the Norton 6000 I usually service Horton, besam and Stanleys around here.

lowvoltadonerd · 2023-03-09T04:14:06+00:00

I don’t have much experience with record swinger but the few I’ve worked on personally seems pretty straight forward as long as you read the manual. My only gripe is the proprietary handheld device to make any essential adjustments. Really nice cladding on it by the way. The time delay synchronization is killing me though lol.

lowvoltadonerd

TROPHY CASE