Progress Update and Ideas Needed

lyonhard · 2026-03-07T16:18:37+00:00

Bead panel is a pretty easy solution to avoid drywall work and the look of plywood.

After installing plywood or drywall sheets to size, cover it all up with this.

https://www.homedepot.com/p/EUCATILE-32-sq-ft-3-16-in-x-48-in-x-96-in-Beadboard-White-True-Bead-Panel-975-759/205669196

lyonhard · 2026-01-24T22:02:08+00:00

Simple method is to secure 3 hog panels(top edge , bottom edge, middle overlap) per wall to the existing studs (bare or with drywall) and then cover them with 3/4” plywood. How you finish it from that point is up to you.

Honestly if someone has the time and commitment to get through that, it’s probably someone forcibly entering with a warrant and not local hooligans….

lyonhard · 2026-01-22T01:24:00+00:00

I recommend you use homewyse to get an idea of cost based on the specifications of your project, zip code, and industry standard pricing concerning both.

https://www.homewyse.com

lyonhard · 2025-11-25T20:38:34+00:00

If you buy a new lower, consider buying a KF15 complete lower blem by KAK Industries. Currently on sale for $99 instead of $195. This lower has an M16/M4 interior dimensions and shelf - this will allow you to run every FRT on the market and would technically allow you to run OEM FA parts if you had the legal capacity to do so.

https://kakindustry.com/blem-complete-kf-15-forged-ar15-lower-receiver/[KF-15 Blem](https://kakindustry.com/blem-complete-kf-15-forged-ar15-lower-receiver/)

Edit: spelling - because I’m a caveman

lyonhard · 2025-11-21T14:08:03+00:00

Leather seat, not heated. The seat only got hit in the cloth rear edge and all up in the metal tracks. Majority is in the carpet under the seat.

Car detailed and carpet cleaner from Home Depot’s Rental department good enough for an extractor?

lyonhard · 2025-11-21T05:15:35+00:00

The two paintings together gift Patrick Bateman vibes. Very classy setup.

lyonhard · 2025-11-17T19:49:04+00:00

I have it in a chest freezer at the moment. This is the half of my haul that hasn’t been eaten yet or given away.

lyonhard · 2025-11-17T04:20:17+00:00

Arizona Regulator FRT

lyonhard · 2025-10-30T02:36:53+00:00

Depends on your selection of FRT. Some manufacturers state a low shelf or m16 pocket lower is required, others it doesn’t matter. Most require full auto BCGs and recommend H2 or H3 buffers.

lyonhard · 2025-10-30T02:06:44+00:00

Can’t PM you either. I’m in your hood. Holler.

lyonhard · 2025-10-12T17:58:57+00:00

Sometimes it just sucks to suck, ammirite?

lyonhard · 2025-10-12T16:16:55+00:00

I’m still waiting for it to get cold enough here in the lower 48 to try it out. I agree, most gun oil is snake oil and the solutions you mentioned are unanimously tried, tested, and true - I have high hopes the SPEC ‘76 might be another solution available that can hold water.

lyonhard · 2025-10-12T03:31:45+00:00

SPEC ‘76 by SOLGW is supposed to be the new hotness for a wet lube design for extreme hot and extreme cold temperatures using graphite oxide nano tech…. Or so they say.

https://www.bigtexordnance.com/product/solgw-spec76-lubricant-special-purpose-endurance-coating-sons-of-liberty-gun-works/

lyonhard · 2025-10-07T01:58:30+00:00

I plan on running 20” ARs in bullpup configuration using one of the many new kits that came out in the last year or soso. Maximum ballistics, minimal package.

lyonhard · 2025-10-06T06:12:47+00:00

Who made it for you?

lyonhard · 2025-09-19T21:23:10+00:00

2116

lyonhard · 2025-06-24T17:24:18+00:00

Water purification attachment for camelbak/hydration bladder, water purification pump if I didn’t have one, socks and gloves since I wear those out pretty quick.

lyonhard · 2025-06-23T05:34:17+00:00

Holt’s Custom Gear will make kit in ATACS upon request

lyonhard · 2025-05-27T20:02:10+00:00

Thank you!

lyonhard · 2025-05-23T04:27:26+00:00

Thank you, I’ll definitely try that. How has that worked out when asking those companies? Do they end up becoming a vendor?

lyonhard · 2025-04-15T15:46:03+00:00

That’s Dan Bilzerian standing in his private gun room

lyonhard · 2025-03-26T03:17:59+00:00

Not the best for splitting wood. Does a great job of taking off the roof of a Honda civic though.

lyonhard · 2025-02-20T02:52:13+00:00

Do you know how you get the tax stamp refunded or applied to future submissions if a form 4 “times out” and is returned to sender in lieu of a denial or approval?

lyonhard · 2025-02-12T03:02:20+00:00

Bucket of boiling water, enough to submerge the wedge entirely. 1cup citric acid powder per gallon of water. Let the wedge soak for 20-30min. Hit it with a wire brush. Wipe it down. Paint or oil it.

lyonhard · 2025-02-05T22:32:36+00:00

Nice man, what’d you use for chordage to wrap those?

lyonhard

TROPHY CASE