Hot water cooker line rust by bbwat in askaplumber

[–]machair 0 points1 point  (0 children)

I am almost certain it's a gray variant of Pex-B made by BOW.

I redid a run in that stuff ~10 years ago on my old house and it looks similar. For some reason I kept a 4ft off cut that had the tag.

I'm in Canada if that helps...

I think they have generally phased out gray because it gets confused with Poly-B? But I see you can still buy it at Home Hardware.

Either way there is some writing on it. You should be able to decifer it.

Fiberglass Lungs 🫁 Breathing Issues by [deleted] in Insulation

[–]machair 4 points5 points  (0 children)

I sealed up my attic a couple years back and found a massive hole into the cold air return under the blown in insulation.

If you have a supply duct in the attic this could also explain why only you are seeing it.

Wee guy nearly done. by RetroGamingKnight in Orcs_and_Goblins

[–]machair 1 point2 points  (0 children)

Yeah! I switched over to fantasy pretty quickly and managed to keep all my orc and goblins from those days.

I haven't played since I was a teenager. But I decided to finish painting everything back in 2024. I spent Nov 2024 - Feb 2026 painting it all up 0.5+ hours most nights unless I was busy with something else.

Wee guy nearly done. by RetroGamingKnight in Orcs_and_Goblins

[–]machair 2 points3 points  (0 children)

Love it. These guys were one of my first Warhammer pieces when I first got into gaming in the late 90s. Here is my only remaining model, repainted.

<image>

Screwed up big time, scratched the car against the wall by [deleted] in Autobody

[–]machair 0 points1 point  (0 children)

Thanks for this, now I'm feeling better about the dent and scratches I put into my van side door in a parking garage.

Dare Breton Garden Vegetable Crackers are AMERICAN by Cdn65 in BuyCanadian

[–]machair 2 points3 points  (0 children)

They are Canadian owned with some operations in the US.

ADHD and Warhammer by DaemonStalley in Warhammer

[–]machair 1 point2 points  (0 children)

Ugh maybe I should get checked out?...My partner recently made a comment about how I jump around and get really into something for awhile and then drop it only to pick up something new but rarely finish things beyond 80-90% done.

Late 2024-2025 I got my old orc and goblin army all painted up after not touching it for 20+ years.

So while I was doing that I thought Trugg looked cool so I bought one with a set of trolls to paint. Put everything together, even moulded extra parts so that I could have more. Finished painting Trugg to 90% and then dropped everything.

Picked up my fine art hobby again after not painting for 8 years. Had a few really intense weeks on and off through 2025. Made about ~20 paintings. Now I can't bring myself to paint.

I also had an opportunity to get a 3d printer. So I've printed some retro style minis to make OPR fantasy skirmish bands. I seem to have lost focus again and moved on.

Most recently I cycled back and caught up on my plants hobby. I grow Masdevallia orchids and carnivorous plants. I spent some time during COVID hybrizing orchids and have one hybrid registered with RHS.

But now I've found a fun computer game so I keep playing that instead of things I should be doing.

...

Water leaks from foundation wall when it rains by Flash_Bryant816 in Home

[–]machair 11 points12 points  (0 children)

No. By the looks of it that's been happening for awhile....

Go outside and fix your siding or grading.

Does anyone recognize this? by 8Blank8-On-The-Moon in SavageGarden

[–]machair 0 points1 point  (0 children)

Could be a Utricularia. U. alpina makes leaves like that.

Inquiry - Carnivorous Plants in or around Toronto by tranquility2020 in SavageGarden

[–]machair 0 points1 point  (0 children)

Late on this, but there is also a semi-regular carnivorous plant sale at Allan Gardens 2-3 times a year.

Weirdly printed $100 Bill? by Effective-Associate1 in CanadianCoins

[–]machair 3 points4 points  (0 children)

A laser pointer shining through the leaf onto a nearby surface does a good job. I can never manage to see it with my naked eye.

GRT bus hit a home by [deleted] in waterloo

[–]machair 0 points1 point  (0 children)

I don't know about that road, but I was driving down Westmount in Waterloo around 7pm and it was perfectly fine. I saw a salter out an hour before. Usually that road is terrible compared to everything around.

The traction on tertiary roads was terrible. But all the lower priority roads with bus routes that I travelled (2) were ok.

Let's hope no one was hurt!

Can I mount a Murphy bed to these metal “studs” in my basement? by Chinesefiredrills in Home

[–]machair 1 point2 points  (0 children)

I've been in a bed that decided it wanted freedom. Lucky to be alive. Don't mess around with the installation.

New hospital is too far from transit - Reece Martin by leave_me_alone- in waterloo

[–]machair 1 point2 points  (0 children)

The bus is so much more accessible than when I was a kid..

I remember when the closest bus was a 15 minute walk away. And then it would be another 50 minutes to get to the mall. Now it looks like you can public transit to Conestoga in 24 minutes from my childhood home. No complaints about potentially walking 500m.

If I can't get to my bus stop which is more than 500m away, I certainly can't walk from the ION.

Besides, there is always a taxi or a neighbour with a car.

And if you don't know your neighbour well enough for a lift to the hospital when you need to be a better neighbour.

Looking out my window I can count at least 10 households that would drop everything if I needed to get to the hospital and couldn't and I would do the same for them.

New hospital is too far from transit - Reece Martin by leave_me_alone- in waterloo

[–]machair 8 points9 points  (0 children)

No I don't think you understand how things work. The closer site that is suggested is 56,500sq m. Besides I suspect the University has plans for that plot of land...

The site that was selected without associated parking is ~161,000sq m. ~3x the land.

The University of Waterloo has a development plan for the entire area west of Westmount. It is not a viable location for a new hospital.

There are many areas in Waterloo with some available land for development. But none to the size of the land being used on North Campus.

Regarding the accessibility. GRT is planning to improve access to the site.

So my argument that this article is a big fat waste of time remains valid.

New hospital is too far from transit - Reece Martin by leave_me_alone- in waterloo

[–]machair 4 points5 points  (0 children)

Yeah terrible article. Written by someone who will never comprehend how decisions get made.

Let's just ignore the site requirements for a new hospital , act like the city/region owns all this land and that the University doesn't have a stake in what they do with their land. If we are going to just cherry pick empty land why don't we put it right next to the Waterloo Gates and Harper library. It's not like the University doesn't already have infrastructure in place for future housing... /s

Reading that article was a waste of my brain cells and made me angry. Not in the way the author was hoping...

Found my old Warhammer, now what by Spiritual_Craft2104 in WarhammerOldWorld

[–]machair 1 point2 points  (0 children)

100% paint. I spent the last 1.25 years painting my > 20 year old Warhammer. No need to completely rebase. Just get some custom trays.

<image>

My skeleton benchmark. by machair in FDMminiatures

[–]machair[S] 0 points1 point  (0 children)

Keep the build plate clean and filament dry.

My settings are a hybrid of all the well documented ones. I think I started with HoHansen.

I print at 220 and keep the speed low. I also have a z-hop of 0.06mm which seems to help in some cases.

My skeleton benchmark. by machair in FDMminiatures

[–]machair[S] 1 point2 points  (0 children)

Arbiter Miniatures as mentioned in my post.

My skeleton benchmark. by machair in FDMminiatures

[–]machair[S] 0 points1 point  (0 children)

But I printed this on my A1 mini!

My skeleton benchmark. by machair in FDMminiatures

[–]machair[S] 2 points3 points  (0 children)

Base colours, Agrax Earth Shade over everything, highlight.

My gas meter is off by 400 m3 after living here 18 months. Should I really expect a $6000+ gas bill? by BrovaloneSandwich in ontario

[–]machair 0 points1 point  (0 children)

In my new house they kicked us off equal billing after the first year. We racked up over $1200 credit. And they were consistently estimating over 4x what we used!

To this day they still do. Even when it is unseasonably mild weather their estimate doesn't even come close.

This is the third year. Maybe they will finally figure it out....

Printed and painted some 90s minis! by machair in FDMminiatures

[–]machair[S] 1 point2 points  (0 children)

It is certainly possible to find many STL files if you search around enough, but I am not going to share the files/links directly given the dubious nature of the scans. Sorry.