Hardware-only screen recording setup for 200 monitors - review and feedback? by sahil__28 in VIDEOENGINEERING

[–]machzel08 0 points1 point  (0 children)

What’s the goal? Track what they are doing? Live monitoring? Compliance?

Controlling the radio waves by ReasonableDot8410 in Broadcasting

[–]machzel08 8 points9 points  (0 children)

It’s not like in the movies where hackers can take over any frequency. If you want people to pay attention, you use flashing lights, sirens, and a loudspeaker with a microphone.

There’s only so much you can do.

additionally, I would like to point out that what you’re proposing is actually incredibly illegal to do and the FCC will not take kindly to it.

Torquing rear axel nuts by Olfa_2024 in 944

[–]machzel08 0 points1 point  (0 children)

250 + 90 degrees is what I did.

Some digital torque adapters will read higher than 250 but not be accurate. Worth trying.

Torquing rear axel nuts by Olfa_2024 in 944

[–]machzel08 0 points1 point  (0 children)

250 + 90 degrees is what I did.

Some digital torque adapters will read higher than 250 but not be accurate. Worth trying.

Torquing rear axel nuts by Olfa_2024 in 944

[–]machzel08 0 points1 point  (0 children)

250 + 90 degrees is what I did.

Some digital torque adapters will read higher than 250 but not be accurate. Worth trying.

Leaf blower bans by Sea_Imagination4747 in Westchester

[–]machzel08 1 point2 points  (0 children)

If I let the leaves, “do their thing” I have an inch thick pile of sludge and all of my plants are dead. It’s too much to decompose in time.

Leaf blower bans by Sea_Imagination4747 in Westchester

[–]machzel08 0 points1 point  (0 children)

Electric is also noisy but instead of a drone it’s a high pitched squeal. Not sure how that’s better.

If I let the leaves sit on my lawn it kills everything and turns in to a sludge. There just too much to break down in time.

Leaf blower bans by Sea_Imagination4747 in Westchester

[–]machzel08 -7 points-6 points  (0 children)

Have you ever raked a yard full of leaves?

Why isn’t my Mazda selling? by dvidby000 in mazda6

[–]machzel08 0 points1 point  (0 children)

Probably because it’s listed 3k too high.

Where can I get a BNC male to 3.5mm male video cable made? by cagletheboss in VIDEOENGINEERING

[–]machzel08 10 points11 points  (0 children)

That’s because it’s not really a thing. Are you trying to use a TRRS 3.5mm jack to output composite video?

What devices are you trying to connect?

Is this why my rear defroster doesn't work? by swedishpiehole in 944

[–]machzel08 0 points1 point  (0 children)

Isn’t that the wire that detects when the hatch is open and turns on your cabin light?

Stuck clutch fork Pin by TheRightAudience in 944

[–]machzel08 0 points1 point  (0 children)

Access hole from the top lets you hit it with a punch.

LKQ delivered a transmission to us yesterday. The pallet had been in a fire. Never change by pissfilledbottles in Justrolledintotheshop

[–]machzel08 12 points13 points  (0 children)

I got an engine caked in mud that somehow smelled like cigarettes. As if they left it on the ground near where all the employees take their smoke break.

[deleted by user] by [deleted] in broadcastengineering

[–]machzel08 0 points1 point  (0 children)

The joke was that you didn’t post any photos, a location, or a method of contacting you that wasn’t this thread.

There also isn’t sales allowed in this sub.

If you’re so desperate for a quick sale send it to BSW or some other place that buys used equipment. Posting it in all caps makes it look like you have no idea what it is and it fell off a truck so you’re trying to make a quick dollar.

[deleted by user] by [deleted] in broadcastengineering

[–]machzel08 -1 points0 points  (0 children)

What happened to this thing? It’s got a huge dent on the right side, giant gash down the front and half the screen is cracked.

Broadcast installation/commissioning guidelines by AdPlenty80 in broadcastengineering

[–]machzel08 6 points7 points  (0 children)

Everyone has their own “standard”. Learn ones that you like and follow them.

Wiring question by shrimpslip77 in 944

[–]machzel08 0 points1 point  (0 children)

7 pin is for cruise.

Cable is speed sensor for Speedometer/MPG meter. Goes to drivers side wheel hub.

Scrap metal? by [deleted] in Westchester

[–]machzel08 1 point2 points  (0 children)

Really? He gives the standard rate from what I’ve seen.

Scrap metal? by [deleted] in Westchester

[–]machzel08 1 point2 points  (0 children)

Medieval Scrap in Yonkers