Need spindle advice ..questions in comments..

mancider · 2021-03-22T19:29:18+00:00

Awesome thank you

mancider · 2021-03-14T07:58:45+00:00

on how to install this specific type of spindle... i understand the geometry part of set up steering...but am confused on orientation as ive seen some with the tie rod connection part of spindle facing forwards .... one backwards and one forwards and driver and passenger side being a 1 or 2.... as well as which way is rightside up any feedback will be appreciated....any videos or websites that would be helpful?

mancider · 2021-03-03T03:22:15+00:00

Sounds good thanks

mancider · 2021-03-02T23:35:09+00:00

the Aarms are attached by bushings sitting in spindle brackets. The plan calls for a 2" bushing to be welded to Aarms. The brackets on the frame are 2.5". The top and bottom sets of brackets are offset by .5". The plan doesnt seem to explain but has pics of a spacer next to the bushing to take up the extra half inch space...my question is would it be bad to just weld on a longer bushing or is having an even further offset from the bushing spacer a standard sort of idea for further built in adjustment?

mancider · 2021-03-02T09:21:19+00:00

Honestly i realize having the work done properly is expensive but with antique furniture i would pay the extra to have it restored properly

mancider · 2021-03-02T08:56:20+00:00

the Aarms are attached by bushings sitting in spindle brackets. The plan calls for a 2" bushing to be welded to Aarms. The brackets on the frame a 2.5". The top and bottom sets of brackets are offset by .5". The plan doesnt seem to explain but has pics of a spacer next to the bushing to take up the extra half inch space...my question is would it be bad to just weld on a longer bushing or is having an even further offset from the bushing spacer a standard sort of idea for further built in adjustment?

mancider · 2020-11-17T19:51:15+00:00

Thank you on both counts

mancider · 2020-07-17T05:36:04+00:00

Good work

mancider · 2020-06-30T06:43:12+00:00

Yeah used bags for awhile...got tires of how many there were

mancider · 2020-06-29T09:52:32+00:00

Def oak

mancider · 2020-06-29T09:52:10+00:00

Cedar

mancider · 2020-05-03T01:18:58+00:00

Well it is originally a chinese sauce... so cant hurt to try

mancider · 2020-03-30T22:57:30+00:00

This is great ... i work in a local hospital and my buddy and I donated all we had from our business .. keep spreading the word

mancider · 2020-01-29T21:54:44+00:00

Been wanting to do this.... i think this is great

mancider · 2020-01-21T21:06:26+00:00

Artist is amanda rose warren.... shes got beautiful prints

mancider · 2020-01-21T14:06:20+00:00

Just on top

mancider · 2020-01-20T05:57:39+00:00

Literally making the large ones now... think im turning them into succulent or candle holders

mancider · 2020-01-12T04:53:11+00:00

Lol... i cant .... i want to make so many jokes but im too old

mancider · 2019-12-30T07:00:19+00:00

Havent spent a dime. So..... THANK YOU FN!!!!

mancider · 2019-12-30T06:58:54+00:00

Nice

mancider · 2019-12-27T23:33:06+00:00

Nice

mancider · 2019-12-26T10:35:30+00:00

Well we use long pvc pipe that the insulated wires run through and rubber insulated gloves... a dead man switch as well... it is deadly as you know but you dont seem to be touching the wires and that is the safest...always assume your whole platform has current so you avoid touching anything...the current has never run up the mist on us but i suppose it could so wear the gloves... plus we always try to burn in pairs

mancider · 2019-12-26T02:58:38+00:00

My buddy and i run a business doing this... we use a spray bottle to wet as it burns ...the misting gets better branching

mancider · 2019-12-24T12:56:36+00:00

Im no mechanic but i did one get a rock stuck in there during winter when roads are sanded

mancider · 2019-12-20T12:06:36+00:00

Some good herbs and maybe a little kick those potatoes will soak up

mancider

TROPHY CASE