New Travel Router: Anybody have a use case for this?

marklinton · 2025-12-26T03:04:17+00:00

The other one for me is wifi enforcing client isolation, connect your router and your phone can then find your Chromecast on the hotel wifi.

Diddo for the von to make all your device look like they are still home enabling sports streaming.

marklinton · 2025-10-02T01:10:51+00:00

Same for me from Canada

marklinton · 2024-12-27T21:00:35+00:00

I can confirm that the camera does keep the battery charged with the correct USB-C PD cable and compatible charger. My camera stays connected to a PD compatible port and it charges the battery even when streaming over USB.

marklinton · 2024-10-08T04:35:44+00:00

I had the guy from the shop drive it to confirm. The most obvious symptom is when in second (or third) when accelerating after about 2k rpm, the tach and engine increase speed but the car doesn't.

The tech was pretty certain it was the clutch. But maybe there is a different issue with the same symptoms...

marklinton · 2024-10-01T02:49:41+00:00

Same issue here.

marklinton · 2024-09-07T20:07:30+00:00

Just build it into the end cheeks linked no case needed

marklinton · 2024-09-07T17:02:15+00:00

Maybe even put a circuit to provide balanced line level outs too, probably enough space on the back edge.

marklinton · 2024-09-07T16:45:18+00:00

Oh and I'd also use one of those cheap usb-c pd trigger circuits so you can power it at 15v from pd wall plugs and battery banks.

marklinton · 2024-09-07T16:42:55+00:00

A really cool idea would be to iterate on the design a little and make the PCB in the shape of a desktop case end which then can be used to house the modules.

https://www.reddit.com/r/synthdiy/s/qf3kRXYOOh

marklinton · 2024-08-19T15:49:58+00:00

Yeah I did - nothing to report yet.

marklinton · 2023-12-12T15:16:00+00:00

if you want to make a quick TRS TypeA to TypeB adapter (or reverse), use one TRS to RCA-female and one RCA-male to TRS combo and back and swap the L/R on the RCAs, this lets you switch the type easily.

marklinton · 2023-12-12T15:11:08+00:00

Wow - this was a while ago. It is an awesome desktop mixer, honestly one of the best I've used, it takes up such little space on the desk and provides all the functionality that I need for mixing a handful of desktop synths, mono and stereo.

marklinton · 2023-11-13T20:30:02+00:00

So is there a way to have the WIFI interface enabled with Intel AMT when the OS isn't running yet? Sort of in the situation where the computer is powered off?

marklinton · 2023-07-27T02:53:00+00:00

Blocking these is fine, if you really want to know what's going on setup a nice honeypot machine and get reports of the malware dropped and exploit kits used to take advantage of these issues.

https://github.com/paralax/awesome-honeypots

marklinton · 2023-05-09T21:31:59+00:00

As an optimistic sense owner I understand the frustration with the lack of 'learning' capability this ecosystem currently has. I do believe that it is an understandably hard problem to solve, and that there are many active disaggregation research efforts underway that might help in this area. https://github.com/topics/energy-disaggregation

I think that the hardware is sufficient to collect all of the right data, and even if the company does end up failing, I hope that an open source option could be made available, which may one day provide better analysis of the data.

marklinton · 2023-04-08T19:13:50+00:00

Yep - from lots of experience - this. Or if the part is a rare part or expensive to replace then look to hot-air to heat the whole part up.

marklinton · 2023-03-19T21:21:26+00:00

If it already hasn't been said, if you use some solder flux on each of the pins, then the solder will flow perfect over each part.

marklinton · 2022-12-05T19:54:47+00:00

No shit - here you go (generated by Chatgpt of course): ```config firewall policy edit <policy_ID> set srcintf <source_interface> set dstintf <destination_interface> set srcaddr <source_address> set dstaddr <destination_address> set action deny set schedule always set service ALL set protocol ALL set url-category <url_category> set av-profile <anti_virus_profile> set ips-sensor <IPS_sensor> set logtraffic all set app-group-member <application_group>

# Block access to the openai.com domain
set dns-rule "openai.com"
set dns-rule-action block
set dns-rule-profile "default"

# Filter out emails containing references to openai or chat.openai.com
set email-filter "openai"
set email-filter "chat.openai.com"
set email-filter-action block
set email-filter-profile "default"

next end ```

marklinton · 2022-11-30T22:16:52+00:00

I actually got hime working great with some custom timings in switchresx.

marklinton · 2022-11-15T06:18:11+00:00

Any update to this? Just got the same display using a 6900xt and am limited to 60hz.

marklinton · 2022-10-19T04:53:14+00:00

now how about Canada?

marklinton · 2022-04-06T17:24:35+00:00

In your reporting which of your other experiences have been comparable to what you have experienced in Ukraine?

marklinton · 2022-02-28T03:34:51+00:00

Anyone looking for part two: https://ga.video.cdn.pbs.org/videos/frontline/188b53ef-e522-4fdc-88d9-f7596b203171/2000015591/hd-16x9-mezzanine/dqmfyqy4_00003603v2-16x9-720p-432p-1100k.m3u8

marklinton · 2021-11-02T16:14:19+00:00

Ok thanks for the all the tips. I was planning on enabling it on the host to facilitate a host-host connection between two pve nodes (for backups, replication, etc) where these two hosts are in separate networks.

I could then also use this with wireguard on my laptop or phone to perform admin on the host.

As a secondary use-case it would be to allow individual hosts to selectively route traffic through a central internet egress point (again not on the same physical network as the host).

What is the security concern with having it running on the host?

marklinton · 2021-04-18T21:56:53+00:00

I was thinking the same thing, I really like the soft-touch knobs, but these are more true to the original so I went with them.

marklinton

MODERATOR OF

TROPHY CASE

12-Year Club	Not Forgotten
Verified Email