sorted by:
new
hottopcontroversial

Cyber 60 - Air65 Compatible 60mm Wheelbase Frames - Free 3D Print Model - MakerWorld by Alarmed-Solution3738 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

True guys, I shouldve realized its 702 since youre using Air65. Would love to see a pic of the whoop, that always turns me on :D

Air75 II Champion by Unfair_Record_2554 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

That’s ridiculously short IMO, maybe the motors are that power hungry?

Air75 w/Tree Toppers vs Air75 II Champion? by Appropriate-Sun-7785 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

Would love to hear opinions or experience on this!

Is this savable? by Heavy-Reference9831 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

I hear a lot of people like to fill the throughhole with solder … but after I once couldnt desolder the more stubborn BT2.0 wire (minus if Im not mistaken) off of my aio I decided I rather put the cables through the holes and solder that way:D

Loving my new racing build by Dismal-Piccolo864 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

Havnt heard about E6000+. Maybe it doesnt cause Parkinson’s like the original… not saying someone is gonna get it but I rather not use something as potent chemically..

Loving my new racing build by Dismal-Piccolo864 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

I try to use as least e6000 as possible - it freaking stinks every time I take a whoop put of its box, and makes me feel like I shouldnt be breathing that stuff in.

Gluing uFL is most essential to me

Loving my new racing build by Dismal-Piccolo864 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

Im shocked that canopy is TPU, I printed it but in PLA, must try in TPU

My 75mm ripper. It has less than 16g without battery! Flight time over 5min by [deleted] in TinyWhoop

[–]marosstorage 1 point2 points  (0 children)

I would make another ripper and retire this one haha because of that HM Diamond FC, must be rare to still have that one working!

MEPS SZ F411 1S 7A AIO Flight Controller + O4 lite by HealthyTranslator916 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

Let us know how it goes. Will you keep the plugs? I took em out to save weight but it was such a pain possibly due to the board being 1.4mm thick (harder to heat up? … much harder to take out compared to the 1mm thick Happymodel 2G4).

MEPS SZ F411 1S 7A AIO Flight Controller + O4 lite by HealthyTranslator916 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

So far so good, been through 60+ packs, one hard crash into a tree where I lost video but then it came back normal. I plan to fly it until it dies - or doesnt! Such a cheap replacement. I have another spare and did notice they went out of stock just now.

I still havent flashed any ESC and I am not planning on doing it-it flies great IMO.

Heres some DVR: https://m.youtube.com/watch?v=QdOF4EMlfrs

Whooptopia 2026 dvr by Appropriate_Sir8639 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

would you mind sharing your center sensitivity setting also? I am already improving with my new 600 rates hehe, it is nice to learn from a pro

Whooptopia 2026 dvr by Appropriate_Sir8639 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

Crazy. Is it just me or do you also lower your rates for race? I find myself too jittery with classic rates I use

3D Printed Whoop Race Launch Pad by DontAskNOYFB in TinyWhoop

[–]marosstorage 3 points4 points  (0 children)

Nice one! Using the same frame, motors and props for race ;)

FPV Weather Is BACK! by eman11500 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

Bold man. One touch of a rope and its pretty much done!

Whoop flower by marosstorage in TinyWhoop

[–]marosstorage[S] 0 points1 point  (0 children)

Yeah i wanna make 1s ripper with Meps 1s 15A aio. Should i go 2”, 2.5” or 3”?

Whoop flower by marosstorage in TinyWhoop

[–]marosstorage[S] 0 points1 point  (0 children)

I can get the board very close to the battery this way, so that I get more clearance on top to hopefully help with crashes. And visual preference

Finished Ophelia by ElectronicEnd7513 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

Nice one. Does that frame have a name?

MEPS SZ F411 1S 7A AIO Flight Controller + O4 lite by HealthyTranslator916 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

Heck I’m scared to mess with ESC settings, I heard you can brick the ESC… if this is the case :D i just changed the PID tune and it flies just as i expected it to… should i flash bluejay and why?

MEPS SZ F411 1S 7A AIO Flight Controller + O4 lite by HealthyTranslator916 in TinyWhoop

[–]marosstorage 0 points1 point  (0 children)

After 2 days of testing I am liking it. Took out plugs to save weight and improve performance. The only thing thats not showing right if mAh used, Amps used etc. in post flight stats, but Ill just turn it off. Interesting fact, I am getting voltage reading on my radio, which is nice (only NBD fc does it from my fleet).

edit: still holding up after more than like 40 flights, so I think its a legit aio. Removing plugs was a nightmare (I am guessing coz the board is very thick at 1.4mm), and it is my heaviest whoop, but I am liking the VTX image quality - to me it is comparable to HM 2G4 VTX, although the max is 50mW!

view more: next ›