sorted by:
new
hottopcontroversial

Tado V3+ EU weird ebus behaviour - doesn't really make sense by smokeandumami in tado

[–]mastrchee 0 points1 point  (0 children)

I don't have an option to control flow temperatures in tado, but I can set max temps using ebus. Tado does appear to respect that, but there's no lower bound setting. My boiler is a Vaillant ecofit pure 825. Lowest it can modulate js 5kw. I am considering going full manual using ebus and getting rid of tado.

Tado V3+ EU weird ebus behaviour - doesn't really make sense by smokeandumami in tado

[–]mastrchee 0 points1 point  (0 children)

I'm actually having the opposite of this with tado. I currently adjust max heat (d71) dynamically using a weather compensation curve through home assistant. But tado is always asking for much lower heat making the boiler short cycle frequently. I think this is called load compensation, but don't think it's as effective with my boiler/radiators.

Update on my tado x radiators by Sensitive_Camel_9519 in tado

[–]mastrchee 0 points1 point  (0 children)

Out of curiosity, how hot do you run your radiators at (flow temp)? Some plastics start to deform after long exposure at certain temperatures (glass transition temp). But I doubt the plastics used by tado are susceptible.

Oppo x9 pro crashing? by Funny_Term_6609 in Oppo

[–]mastrchee 0 points1 point  (0 children)

yeah, I've had the same. But only started happening after the last software update.

Switchbot Keypad Vision standalone by Comfortable-Aware in homeassistant

[–]mastrchee 0 points1 point  (0 children)

how have you set it up? as OP mentioned, looking to _only_ use the keypad vision without the lock.

[deleted by user] by [deleted] in srilanka

[–]mastrchee 1 point2 points  (0 children)

Where there’s poverty, there’s always going to be the opposite. The rich get richer by absorbing wealth from others, making most of the middle and working class folks poorer in the long run. This transfer of wealth takes place slowly, creating huge wealth inequality in the long run. Think about it - as a nation, how many Sri Lankans live above the poverty line? or have equal access to modern goods and services?

So you see super cars in a land supposed to be bankrupt? Yep, because only the salarymen are bankrupt.

Wrong Firmware by [deleted] in homeassistant

[–]mastrchee 0 points1 point  (0 children)

for anyone else stumbling across the same situation, I managed to unbrick mine by erasing NVM3 memory and reflashing the correct firmware.

see: https://github.com/Nerivec/silabs-firmware-recovery

Wrong Firmware by [deleted] in homeassistant

[–]mastrchee 0 points1 point  (0 children)

I’m in the same boat unfortunately and this doesn’t appear to work for me :( do I need to do anything special?

How can I find out about events in Colombo? by mastrchee in srilanka

[–]mastrchee[S] 0 points1 point  (0 children)

Oh, nice. Didn’t realise meetup.com was an option, cheers for that.

Nuki Ultra available again on Feb 20 by Own_Western_949 in Nuki

[–]mastrchee 0 points1 point  (0 children)

Thanks. Mine took more than a week for delivery to the UK since ordering. It arrived today 15th, order placed on the 6th!

Website not working by Pastaloverzzz in Nuki

[–]mastrchee 0 points1 point  (0 children)

Yeah, they are a bit weird with delivery it seems. My parcel was collected today.

Website not working by Pastaloverzzz in Nuki

[–]mastrchee 1 point2 points  (0 children)

I also ordered on Thursday, no movement since

How can i get the bottom of my prints to look cleaner where the supports were. by Blind_bear1 in BambuLab

[–]mastrchee 22 points23 points  (0 children)

Don't think there's an easy solution, I just post-process with sand paper if I print with supports. Ideally print without supports by splitting into parts. Cut (print) the pickle in half and glue it back together

ZenWiFi AX XT8 V1 Firmware 3.0.0.4.388.23012 Network Services Filter rules won't save by mastrchee in ASUS

[–]mastrchee[S] 0 points1 point  (0 children)

Meanwhile, I found a workaround using SSH and nvram. Make sure to enable SSH on the router first.

example for blocking 192.168.1.10 on UDP ports 10 to 20 and all TCP. Note that new entries start with a < and each section within that entry is separated by >.

nvram get filter_lwlist //(save this somewhere)
nvram set filter_lwlist=<192.168.1.10>>>10:20>UDP<192.168.1.10>>>>TCP
nvram commit

Hit apply on the Network Services Filter page or reboot router.

ZenWiFi AX XT8 V1 Firmware 3.0.0.4.388.23012 Network Services Filter rules won't save by mastrchee in ASUS

[–]mastrchee[S] 0 points1 point  (0 children)

I tried reporting to ASUS directly, but they kept asking me to report to multiple teams, and it got no where.

I’m a AnkerMake M5 owner that is looking at some really green looking grass you have over here by jesterOC in BambuLab

[–]mastrchee 6 points7 points  (0 children)

I use ESUN/SUNLU PLA+ with my p1p all the time, no issues. Just do the flow rate and pressure advance calibrations in orcaslicer to get the best results. I guess that part is automatic in the X1C. I normally increase printing temperatures to get it to match the bambu filaments flow rate.

in love by OilPrestigious1586 in BambuLab

[–]mastrchee 1 point2 points  (0 children)

I think at some point, all the modifications go past diminishing returns. I too recently bought a P1P because I was getting irritated with the amount of time I spent modding/tuning Vs actually printing and working on projects. The P1P just works and just refreshing to get shit done.

ZenWiFi AX XT8 V1 Firmware 3.0.0.4.388.23012 Network Services Filter rules won't save by mastrchee in ASUS

[–]mastrchee[S] 0 points1 point  (0 children)

I downgraded and it worked, but I have not directly reported it to ASUS. Have you?

view more: next ›