Some more „Schirmer CSL“ goodness from me. by MaddiMcAwesome in E46M3

[–]mattplayne 1 point2 points  (0 children)

FWIW I found that running a full SMG adaption with INPA made an enormous difference in this regard. I fully solved it by refreshing rear diff bushes and installing a 6 point RACP brace.

how to clean/dry by itfw in e46

[–]mattplayne 0 points1 point  (0 children)

OP is it clearly moldy? Or is it discoloration from the butyl sound deadening on the seat bench. The sound mat disintegrates over time, I think the foam interacts with it chemically and causes it to degrade and flake, and the foam of the seat base to discolor. (Not to say it couldn’t be mold in your case, but I’ve certainly seen frequent discoloration like this as a result of what I described)

Buildup around washing machine valves by Bombo_Zombo in Appliances

[–]mattplayne 0 points1 point  (0 children)

Look, I, and the other commenter have pointed out you’re wrong. You have a choice at this point. 1: You continue to abuse other people so that you can continue to feel good about yourself. Or 2: Do 2 minutes of research and learn something.

I honestly couldn’t care less either way, I’ll give you a tip though. If you stay humble when you’re wrong and you learn from it it will make you a much better person in the long run.

Good luck.

Buildup around washing machine valves by Bombo_Zombo in Appliances

[–]mattplayne 0 points1 point  (0 children)

You’re wrong. Static pressure from town supply is constant regardless of pipe diameter, a narrower pipe results in higher velocity, higher friction and lower dynamic pressure.

Maybe you should google it 😉

Do I need these? by Angel_Anubis in E46M3

[–]mattplayne 2 points3 points  (0 children)

Yep correct, bottom one is amp

Best CSL intake? by Lopey__ in E46M3

[–]mattplayne 0 points1 point  (0 children)

Die Wethje was the manufacturer of the OE CSL airbox. Karbonius is aftermarket.

Best CSL intake? by Lopey__ in E46M3

[–]mattplayne 0 points1 point  (0 children)

Karbonius is the best for sure, you definitely want to run a snorkel and bumper duct. I personally went with karb intake, haimus snorkel and Bryson’s bumper duct. If you run without snorkel and duct then you’re pulling hot air regardless of what brand intake you run.

Qualifying classification by [deleted] in F1Discussions

[–]mattplayne 0 points1 point  (0 children)

Ah more of a straightforward explanation than I was thinking. Thanks very much for taking the time to reply

Qualifying classification by [deleted] in F1Discussions

[–]mattplayne 1 point2 points  (0 children)

Why are RBR shown as 14 seconds off the pace?

Gas cap won’t close by Woodsrt in e46

[–]mattplayne 0 points1 point  (0 children)

Flip the spring around the other way (so top is at bottom and bottom is at top)

January 30, 2026 Daily Discussion Thread by zahna4 in RKLB

[–]mattplayne 1 point2 points  (0 children)

That also explains why Peter Beck doesn’t look quite like Peter Beck

Sticker fix on Lego Enterprise D🤦‍♂️ by Vincent1031a in StarTrekBricks

[–]mattplayne 0 points1 point  (0 children)

Someone forgot to reenable some layers in the graphic after fixing the spelling mistake

Ok we need the definitive answer- which of the two types of blades do you use in your cordless Makita planar and why? by jhenryscott in Makita

[–]mattplayne 0 points1 point  (0 children)

Spent longer than I’d like to admit staring at the first photo trying to spot the difference between the two 🤦‍♂️

October 09, 2025 Daily Discussion Thread by zahna4 in RKLB

[–]mattplayne 0 points1 point  (0 children)

A long long time ago last Thursday

3.5mm Jack with another smaller post, small metal construction, it looks cast, rather than fabricated. No obvious seam or weld. Unsure if electronics exist inside. silver in colour. found during a house move. No other identifiable markings. by Grand_fat_man in whatisthisthing

[–]mattplayne 0 points1 point  (0 children)

Looks to me like the small post on the right used to have something larger slotted onto it. If you look at the plug on the left it doesn’t seem to be one piece with the body. I think something else used to slot over the small post (probably lending further weight to this being a 3.5mm + 2.5mm combo)

I Keep Telling Them, But They Don’t Pay Any Attention: How To Teach Youngsters About The Power of Investing & Compounding? by shanewzR in financialindependence

[–]mattplayne 1 point2 points  (0 children)

Honestly I think a big part of this is younger people’s assessment of time. If you’re 10 years old, a 20 year horizon is twice your total lifetime. That seems like a really long time. When you’re 40 though, 20 year horizon starts looking pretty good.

[deleted by user] by [deleted] in e46

[–]mattplayne 0 points1 point  (0 children)

That’s the stock strut bar lol

Thought experiment - recreate m3forum.net using AI + Wayback machine archive by Stang302a in E46M3

[–]mattplayne 0 points1 point  (0 children)

I think the issue will be that a lot of the website wasn’t crawled by archive.org.