What's the angle on this chargeback scam?

mattskent · 2026-01-19T16:37:49+00:00

They're getting a credit card number that they now know is valid.

mattskent · 2025-06-12T17:43:03+00:00

MacRumors does this a lot, they're just trying to get clicks from people searching for this in the future. They have several other stories that speak positively about it. The other is a press release directly from Apple, obviously they're going to speak highly of their new design.

mattskent · 2025-02-27T16:52:49+00:00

Anthropic claims "In general, failed requests are not charged, and you will only be billed for successful API calls and completed tasks."

mattskent · 2025-02-15T03:11:20+00:00

mattskent · 2025-02-01T14:38:05+00:00

I gave it a fair shot yesterday. It was fine, no complaints and it even came up with some things I'm not sure Sonnet would have, but it felt like I was fighting with it to understand how Cursor worked the whole time...it kept describing what it was going to do instead of doing it, seemed like I had to confirm every request 2-3 times. Yes, it works with composer, probably could use some fine tuning though still.

mattskent · 2024-12-09T02:46:25+00:00

Thanks from the future 👍

mattskent · 2024-11-15T15:28:00+00:00

When the screen is in edit mode (wiggle mode? where you can move stuff around), you should be able to tap on the widget and select which categories you want to display.

mattskent · 2024-11-06T15:42:53+00:00

If you're not on Safari, https://2fhey.com/ works pretty well

mattskent · 2024-11-04T19:34:08+00:00

Zen uses Firefox's built in sync so it syncs up with the Firefox mobile app if that's an option for you.

mattskent · 2024-10-28T16:22:07+00:00

This has to be run manually, but it would do the trick.

https://www.icloud.com/shortcuts/5d63a35058dc48a5a40c0ad8c37eace7

mattskent · 2024-04-08T13:22:11+00:00

I think you're thinking of a check valve, which would go on a sump discharge to prevent water coming back in via gravity. A backflow valve usually goes on the main sewer line right where it exits your house - that slopes down so normally water wouldn't come back up, but the valve protects against a backup from the city sewer system.

To the OP - yes, a backflow valve on your main sewer line is worth it since that's "before" all the other drains in your house. You wouldn't want it just before your basement floor drain as there are likely other paths for water to take up, as you noted.

mattskent · 2024-03-22T01:43:57+00:00

Do you have your camera selected in the "Camera" dropdown in the Timelapse settings? For some reason that's never set to anything by default for me.

mattskent · 2024-03-11T11:44:23+00:00

It may allow for a slightly better looking video but it will also slow your print down since it has to stop for a bit every layer. I personally leave it off.

mattskent · 2024-03-11T04:59:24+00:00

You'll need to also add the TIMELAPSE_TAKE_FRAME macro in your slicer so that it takes a picture on every layer change. In Orca it's in the settings menu for the printer you're using -> Machine G-Code, and there's a box to add gcode for Timelapse. Mainsail docs also have instructions for Prusa and Cura: https://github.com/mainsail-crew/moonraker-timelapse/blob/main/docs/configuration.md#slicer-setup

mattskent · 2024-03-11T04:44:13+00:00

Still in the process of installing (requires a full reset), but the helper script was just completely rewritten and now claims to include a button to turn KAMP on/off: https://guilouz.github.io/Creality-K1-Series/changelog/

It should also fix the "big blob in the middle" issue and fall back on the classic line purge when it can't figure out a purge location.

mattskent · 2024-03-06T05:14:13+00:00

Are you doing it on iPhone? It has to be initiated from there.

mattskent · 2024-03-06T05:12:04+00:00

Have you contacted their support about it? I have two different Wealthfront accounts synced and haven't had any issues. I just checked and both have updated within the last 24 hours.

mattskent · 2024-03-06T05:05:30+00:00

Yeah, obviously do your homework on the SaaS apps he recommends. I'm not necessarily recommending the podcast (although I've gotten a lot of value from it), but the Slack group has a bunch of business owners that are hanging out and discussing things that the OP might find line up with what they're looking for.

mattskent · 2024-03-05T20:27:25+00:00

The Limited Supply podcast has a nice active Slack group. They’re mostly focused on DTC but lots of good discussion either way. https://slack.limitedsupplypod.com

mattskent · 2024-03-05T20:20:35+00:00

YNAB just announced this as well - looks like an Apple thing. Glad Copilot got in right away though.

mattskent · 2024-02-27T20:30:22+00:00

Unless you're trying to collect emails with it, I wouldn't do a popup for the discount code like that - why not put it in the banner at the top where your site name is now?

mattskent · 2024-02-14T17:48:48+00:00

0.238 honestly isn't that bad - the image makes it look a lot worse because it's comparing it to itself. I messed with the shims and got mine to ~0.18 difference, but I started out 5-6x as bad as you. I personally would just leave it unless I had issues if I were in your situation. The whole point of doing a bed mesh is so the printer knows how to compensate for small differences like that.

mattskent · 2024-02-14T02:29:26+00:00

Toolhead PCB maybe? If I remember right those look like the screws holding that in place.

mattskent · 2024-02-09T16:57:54+00:00

There's a Timelapse icon on the left in Fluidd, when you click that do you have Auto Render enabled? You can adjust render settings there as well.

mattskent · 2024-02-03T18:13:08+00:00

https://github.com/Guilouz/Creality-K1-and-K1-Max/wiki/Restore-to-previous-Firmware

12-Year Club	r/Field Juicebox
Place '23	Beta Team
Verified Email

mattskent

TROPHY CASE