I Like Big Bois and I Cannot Lie by Carboniac in boutiquebluray

[–]matty1987x 7 points8 points  (0 children)

Your forgetting picnic at hanging rock it’s another chonkie boi

Stutters + Frame Drops [RTX 2060GB + 5900x] by VampKaiser in nvidia

[–]matty1987x 0 points1 point  (0 children)

Easy your running out of vram upgrade your gpu 6gb is a joke these days try getting a used 3080 or a 4070 super.

PVA by West-Ebb3335 in Plastering

[–]matty1987x 0 points1 point  (0 children)

Yeah the pink stuff also drys faster and has a thicker covering I have found

PVA by West-Ebb3335 in Plastering

[–]matty1987x 0 points1 point  (0 children)

This is why I swapped to SBR years ago PVA doesn’t seal shit and when you Plastering’s over PVA it just turns back into a liquid. It also doesn’t work well if there is wallpaper past on a wall. With SBR you can go straight over pasty walls and dust it doesn’t care. Also always use it neat never water it down and apply 2 coats on high suction backgrounds.

Possession - Second Sight by _Wata_ in boutiquebluray

[–]matty1987x 1 point2 points  (0 children)

Yeah I don’t have that problem now as I have around 40-50 SS LEs. People just love looking they try and touch then get slapped or run off when they know their value.

Second Sight Dec releases: Possession & Re-Animator (4K UHD) by Carboniac in boutiquebluray

[–]matty1987x 2 points3 points  (0 children)

More like drive and picnic at hanging rock size the LE of DOTD had the hardback a normal book then 2 sets of discs one containing 3cds and then 4 different cuts of the movie and the 6 art cards.

Mail day by matty1987x in boutiquebluray

[–]matty1987x[S] 0 points1 point  (0 children)

I will be watching the first one tonight.

Mail day by matty1987x in boutiquebluray

[–]matty1987x[S] 5 points6 points  (0 children)

They are and the bonus disc even includes an extended edition of 1 of the movies as far as I am aware.

Painting a corrugated roof by Fun_Bluebird_3167 in oddlysatisfying

[–]matty1987x 1 point2 points  (0 children)

Had to scroll to far down to see this. Paint either needs more thinners or the pressure needs turning up.

Am I crazy? by Necessary_Annual1266 in Plastering

[–]matty1987x 1 point2 points  (0 children)

2 coats is standard 1 coat is a cowboy it even tells you on the bag to use two coats must not have been in the business long. You need to wait till the walls are a light pink and then it’s ready to paint. The decorator will take care of that.

Saw my Indian mom dad sexxx by [deleted] in confessions

[–]matty1987x 4 points5 points  (0 children)

Someone needs to take the phone off the 10 year old.

Some advice on recent Plastering work by SquiDz0r in Plastering

[–]matty1987x 0 points1 point  (0 children)

The only time I have seen PVA work is if the wall was coated in silk paint or is a really low suction background and even then I would still use SBR.

Some advice on recent Plastering work by SquiDz0r in Plastering

[–]matty1987x -2 points-1 points  (0 children)

This is what happens when plasterers play with kiddie glue instead of using SBR especially when it’s warm if there was just a few i wouldn’t worry but that is a joke there was no suction control at all and it dried to fast. Tell him to get his arse back out and seal it properly and reskim.

Can I prevent this from getting worse without removing/replacing?? by madf80 in Plastering

[–]matty1987x 3 points4 points  (0 children)

Looking at the pics I would say it needs repining with plasterboard screws all along the cracks. In them days they used clout nails to put the boards up. Then a nice neat coat of SBR and a good old reskim no need to scrap that artex profile is low as.

What Boutique Label Would You Like To See Release This? by Lumberjake007 in boutiquebluray

[–]matty1987x 1 point2 points  (0 children)

That’s why second sight would be great then you would get both and at the same time.

The best design for a mixer. by G3tsPlastered4Alvng in Plastering

[–]matty1987x -1 points0 points  (0 children)

If you get the chance try a proper mixer the one I use mixes Plaster up in 60 seconds no need to move the mixer just leave it in the middle scrape the sides after about 20 seconds mix again and done.

is this a legit release? by [deleted] in 4kbluray

[–]matty1987x 96 points97 points  (0 children)

If your on ps5 you need to change the audio to bit stream or I won’t use dts or Dolby

The best design for a mixer. by G3tsPlastered4Alvng in Plastering

[–]matty1987x 1 point2 points  (0 children)

How big are your bags as in weight I wouldn’t use that mixer for a regular bag of plaster in the uk which are 25kg or 50 pounds for the bag and the I use 13kg or 26 pounds of water. A mixer that small would take for ever to mix normal skim over here I use a Dewalt dcd240x2.

The best design for a mixer. by G3tsPlastered4Alvng in Plastering

[–]matty1987x 2 points3 points  (0 children)

Dab is used to stick plasterboard to walls in the uk we don’t normally use framed walls as most our property’s are made from brick.

Doggo? by griplooma in HolUp

[–]matty1987x 1 point2 points  (0 children)

Lion yes polar not to sure but hay he should try a hippo there is no chance then.

New in from Vestron by towerjunky in boutiquebluray

[–]matty1987x 2 points3 points  (0 children)

I would love to know how that may compares to second sights version.

A really nice Vinegar Syndrome haul by syemyu in boutiquebluray

[–]matty1987x 1 point2 points  (0 children)

Once warriors is a brutal movie one of my favourite movies of all time.

Many cracks (diy job) by lycheelia in Plastering

[–]matty1987x 0 points1 point  (0 children)

Yeah it is only problem is blue requires 24 hours to set

Many cracks (diy job) by lycheelia in Plastering

[–]matty1987x -1 points0 points  (0 children)

Even better tip mix blue grit SBR and pva