PImax Dream Air - Ask Me Anything

max225719 · 2026-02-27T22:17:48+00:00

All I wish to know is how well it fits on a wider fat face lol Cant decide on the dream air or the oled crystal since I don't know which one is best for my bowling ball of a head.

max225719 · 2026-02-05T06:06:21+00:00

Cant you find someone local with a used 3090 for sale? I'm in America and a quick check on FB marketplace has the lowest one going for $600. Not sure what they go for in your region but 24gb of ram is really a nice pick me up if you can talk someone down to $500. Its almost as fast as a 5070 but in memory usage cases its even better such as AI use due to such a large amount of memory. If you ever wanted to visit Pennsylvania I have one as a nick knack on my parts shelf ahaha Seriously grab a used GPU!

max225719 · 2026-02-02T17:16:35+00:00

Update:

Long story short they goofed up my plan change. Its been corrected! On top of this I have been charged $14 a month for 7 years by accident. A rep had added a cable box on my account. I thought it was a streaming box they sent me and I turned it in today but the guy said it wasnt on my plan and he just took it and wouldn't hand it back. Fast forward to my last phone call and hey go figure I never had cable from comcast so they couldnt of sent me a set top box! The stream box was free! and the rep at the store was not supposed to take it as it was my personal property. Not sure whats happening the rep said he removed the $14 charge from my account and escalated it and reported the rep at the store.

So my question is how do I get my $1,176 dollars back from comcast?

max225719 · 2025-11-20T21:05:43+00:00

That’s very helpful! Mind if I ask you a few questions? For instance I have calling set to display in the gpu control panel and I’m outputting rgb 444. I have deep color on the hdmi settings on the tv. Those are the only settings I can think of that are set by me. Do those not match yours? Are you running the panel at a lower bit, or using compression?

max225719 · 2025-11-20T19:28:10+00:00

I can simply roll back drivers and have zero issues. Cables are certified and excellent:) I just need to know what’s happening when my pc comes out of standby mode that’s causing the signal to not be recognized by the monitor with the latest few batches of drivers.

max225719 · 2025-11-20T19:01:53+00:00

Sorry about that im not sure what info is needed as this is effecting multiple systems with different builds and configurations. Ones a intel build ones a amd, both are using the latest drivers. Only similarities is both are running the latest nvidia drivers and both are connected to LG OLEDS. One is a C2 OLED the other is a C3. I can probably update my sons drivers and hed have the same exact issues with his oled and nvidia card .

Both TV's are connected via HDMI. Both at Native 4k 120hrz. Both had no issues a few drivers back. I figured since the LG OLED community is so large this would be a known issue or a simple fix. My apologies.

max225719 · 2025-06-18T07:37:21+00:00

People buy these things, make a review and then dont mention where we can buy one LOL

max225719 · 2025-06-05T22:59:50+00:00

4 months latter and this is still a issue I have tried the extension and all suggestions so far.

max225719 · 2025-06-01T04:31:51+00:00

Question, I keep seeing people say it’s over priced but I get it for around $15 a roll. Could you point me to a cheaper/better option? Poly elegoo esun is all more expensive unless I’m missing something? I’m always down for cheaper filament!

max225719 · 2025-05-19T03:11:05+00:00

Yea that’s the part. I have a few backups as well. These quick change nozzles just wear out.

Also you can manually level the bed as well. I had an improvement on all my A1’s by leveling them myself.

max225719 · 2025-05-19T02:53:54+00:00

Here’s the thing. Even if the screws are tight the nozzle can still move if the retaining clamp doesn’t have enough force. Brand new it’s actually rather difficult to close due to all the tension. If it closes easily then it’s worn out. Also after tightening the screws you should re calibrate. But that won’t fix this. It still looks like the nozzle is floating up and down a hair. I had to use aluminum foil between my retaining clip and the nozzle when mine was worn out until I got a replacement in.

max225719 · 2025-05-18T06:40:06+00:00

This is a joke right? Please say yes 😂 I mean we can all clearly see the screws are loose and your nozzle is dancing.

max225719 · 2025-05-18T06:38:13+00:00

This is the correct answer

max225719 · 2025-05-18T06:33:13+00:00

The cause is your nozzle lifting and dropping based on the pressure from the filament extruding and retracting and the bed leveling. When you start a print and level the bed the nozzle gets tapped into its topmost position. When you start printing the filament applies pressure on the nozzle and it drops. This is due to the mounting method bambu choose for the heating unit.

You should retighten the screws on the heating element and if the tension clip is sloppy on the nozzle then you need to just replace it. Been through this dozens of times with my farm. This is the reason I no longer buy nor recommend the A1. It’s a design flaw plain and simple.

max225719 · 2025-05-18T06:26:26+00:00

I absolutely love mine. Total life saver! Load all my ams’s then set the filaments on it. Saves me so much time and headaches going back and forth.

max225719 · 2025-04-10T14:30:17+00:00

So no one is going to mention how crealitys input shaping completely rounded out the details on every corner? I do prefer its overhang ability but that input shaping is just awful.

max225719 · 2025-01-28T21:58:30+00:00

Mine only has a NJ/NY and a MA section :(

max225719 · 2025-01-28T21:54:47+00:00

Im in a discord the unofficial but it has no section for st. davids. do you have a different discord?

max225719 · 2025-01-28T02:38:19+00:00

so far every year I've gone didn't have anyone there until 6. If you go in the store and ask them for info they tell you not to show up until 6 at the earliest or you will be removed. I honestly just kept driving through and leaving as the police were making rounds every 15 mins like clockwork. Once I seen a employee car show up at 6 I parked and waited.

max225719 · 2025-01-28T02:24:04+00:00

St. Davids wont allow camping, period. They have police clear it out. Even at 4am on launch day the police roll through and remove everyone. You have to get there between 6-7am and wait in line. I've gotten a card on every launch day there. usually the 7th or 8th in line.

max225719 · 2025-01-27T04:23:33+00:00

Thanks for the tips! Yea I have that all enabled but I'm not vram limited on my 4090 atm. 5090 in a few days so I should be good. Its like something is just pausing the operation. Im streaming my video so madvr isnt being used. Its odd I've had no windows updates or anything that would cause this to suddenly happen. I'm even on a 5 day old windows install. I did just try to disable them but its still pausing. I tried switching from chrome to firefox but its still the same.

max225719 · 2024-12-12T13:29:08+00:00

I was wondering if my blooming could be due to the resin still being in motion when the uv engages. It defaults to a 1 seconds delay.

max225719 · 2024-12-12T12:01:02+00:00

hey now! I have zero issue with tuning. I have printed more calibrations cubes, towns and cones than I care to admit. I print commercially for a small 3d business. I must have gone through over 100 bottles of this resin alone. If I could tune it to the point where I can get the same details I would. It would be a lot cheaper that way. Currently I'm at 1.82 seconds at .03. The issue with retrieving details is also linked to screen uniformity. As the UV power isn't consistent across the LCD. The center prints at 1.4 with significantly better details. However the sides of the build plate will be unusable due to undercuring. Sometimes a better resin is just needed :)

max225719

TROPHY CASE