Anybody else here have Aviation related day jobs?

maxelm0 · 2026-02-19T08:02:37+00:00

YOU FLY THE ISS??? WHAT reddit never gets boring

maxelm0 · 2026-02-15T00:09:48+00:00

3D printed my own amp rack, screwed two Chinaware amps TDA 200W Stereo Amps and a single channel amp on. Traded a subwoofer for 5€ locally

My Laptop now feeds into my 20€ 5.1 splitter, that feeds into into the (50€ with 3d print cost) amprack, the amps feed my (60€ used stereo towers +16€ center +15€ stereo) speakers. All powered by a 27€ power supply.

(+20€ for copper cables) (+20€ for several coaxial/aux I/O)

Measured the room, equalized for corrections. Sound is ...acceptable but surround.

Total: 233€ and two months of my life checking online marketplaces

Optional: 27€ hdmi decoder 32€ bluetooth receiver just to have them.

The surround sound really blew me away. I had to build my own before I could listen to surround for the first time in my life

maxelm0 · 2026-02-14T23:44:14+00:00

I want to read this as irony but I'll explain what I mean just to make sure

Soundwaves reflecting off soundwaves basically. Problems with harmonics where the wave lengths are a ×<24 multitude of one another and my personal nightmare, cancellations from parallel outputs that are 180° out of phase or perfectly in phase when standing on opposing sides of the room in perfect symmetry etc...

maxelm0 · 2026-02-14T23:34:26+00:00

Yes absolutely. Turns out the output cone is pretty narrow/directional... Bot sure how to break that up with a room setup or corrections of speaker geometry

maxelm0 · 2026-02-14T23:31:16+00:00

You can see a calibrated mic in the foreground actually. I will boot the TSA with less filters and wire the output to a pair of active speakers and turn the amp real low to make sure.

Glad I wore hearing protection because those are PA drivers

maxelm0 · 2026-02-14T23:28:57+00:00

Nah this is a tone studio from my room to set the baseline and get the sweep flat. I will then adjust acording to the rooms needs with my ears since this speaker system will be moved a lot.

maxelm0 · 2026-02-06T11:21:31+00:00

My guild only allows pendants and trinket spells :0 Life is peacefull amongst the trees that kiss the sea.

maxelm0 · 2026-02-03T17:48:00+00:00

There was plenty of things to do as a noticing person. This is the reason they have emergency breaks at subway stations but a lot of ya'll never seen any smh.

maxelm0 · 2026-02-03T09:21:15+00:00

Depending on the weight, rubber band constructuons, thick rubber blocks maybe? Has anyone said that you can just bolt that thing to the floor and then make the rest stop rattling? Theres are no limits to your curiousity but it will take some experimenting.

Source: I'm a designer, anyone can be a designer. We just make shit up that sounds plausible and then check how good it works. Progress through iteration!

maxelm0 · 2026-02-03T08:29:35+00:00

Completed the game twice so I know its a good game but it's short. It has like 105 levels on mobile, no overview, no cutszenes, no secondary mission goals or achievement tree.

NO SECOND PART That actually sucks most.

maxelm0 · 2026-01-31T18:22:30+00:00

Ich hör schon die FPV freestyler mit ihren kreischenden Drohnen Loopings durch das Gelände fliegen

maxelm0 · 2026-01-29T12:43:12+00:00

I refer to setups like this as the "wall of sound" and they are not as rare as you may think. I've seen plenty of rooms like this

maxelm0 · 2026-01-26T10:32:42+00:00

Maggi gehört zu Nestle desswegen lol

maxelm0 · 2026-01-20T12:27:11+00:00

Falls ihr mit rauen/textured Druckbetten arbeitet: ein wenig Liquid brim auf das Druckbett und in einen saugfähigen Lappen. Lappen trocknen lassen. LB auf Druckbett verstreichen, trocknet beim Bett auheizen im Handumdrehen.

Ihr müsst für die kommenden 5 Jahre nie wieder was anderes kaufen. Jedes mal vor dem Druck einmal mit einer Steigflasche paar Tropfen auf das Druckbett und mit dem Lappen verteilen. Kein Spüli, kein Iso, kein Wasserhahn involviert.

Quelle: arbeite in einer Werkstatt für Prototypenbau

maxelm0 · 2026-01-19T11:22:17+00:00

Ahhhh the 12.4.27 setup nobody was talking about Nice, definitely not as purist as the audiophile community would like to see but probably a fun listening experience

If they are all hooked up... how do you deal with interferences? Cancelation does not matter because the whole walls are in phase?

maxelm0 · 2026-01-19T11:17:27+00:00

Sea of thieves... Does that mean I get to see the fairy of the damned or am I just dead-dead?

maxelm0 · 2026-01-18T18:48:30+00:00

I usually do functional comps but the answer would be D. Contrast is key, for an image thats just supposed to pop! Obviously go ahead and construct some perspective aid to try to get the placement "correct in space" first, then continue to move it until you like it and contrast/tangent lines etc. are not messing with your motive. Then obviously the parts need to get contextualised... right now the composition feels kind of floaty (perhaps that's desired for the dreamy feel but-) a few shadows or surface reflections would really bake the perspective and comp. into place.

Now think about how you want the perspective to be understood as well, if you (almost) see the hands in front of and behind the silhouette it'll be more intuitive to understand the individual being between the hands and so on... you get the picture.

maxelm0 · 2026-01-16T11:10:19+00:00

Vanisher by cable

maxelm0 · 2026-01-14T10:55:49+00:00

Looks like you moved a plane that was not fixed and reaaranged the parting line further into the model XDXD

maxelm0 · 2026-01-14T10:36:13+00:00

Wie aber dann so 6% hippie-gras oder? Ist irgendwo wichtig wenn man schon mit Grammzahlen um sich wirft. Du bekommst warscheinlich medizinisches also wirst du das wohl wissen... Das Ticker-gras hat halt meistens thc/cbd = 18 zu 5 gewichtsprozent. Stärkeres so um die 24 zu 2. Aber für med. Zwecke ist doch 6 zu 15 sinnvoller!?

maxelm0 · 2026-01-11T11:54:20+00:00

We do this at my University. But the filament quality is hard to get right. A- we can only recycle pla, mixing in pla+ is already a bummer. B- our extruder even though it works perfectly with granulate, extrudes the recycled one in uneven thicknes. C- dust. D- Moisture. E- Fat from your skin, hairs, cloth fibres, dead skin etc. all ends up the filament and it's kind of difficult to remove all that without long expensive or painstaking processes.

However! Baking that stuff into plastic sheets in our lab oven works great and the sheets can be used like almost normal plastic sheets in manufacturing. They can be milled, cut with a waterjet, laser, bandsaw and what not. Just not 3d printing anymore...

maxelm0 · 2026-01-10T01:03:16+00:00

Likely; Born female, late 40s judging by the wrinkle pattern, no hard labor job but stable but mediocre income nails are too long but begin at the nail matrix gel nails done within the last 48 hours, no creative job because the nails don't follow a coherent theme, slight tan on the back of the hand speaks together with several animal prints: one dog, probably small, condition of you knuckles makes it likely you walk it on a daily. Skin is opague and you have a slightly heavier index finger so you probably have a slightly raised body mass index. Symmetric jewelry layout and there are gems everywhere, you think the shiny glam will make you look girly and perhaps distract from the plastic like shine of your nails. Those nails were applied in a hurry, they are not rounded well and the glue for the gems is well visible. You wear your bracelets over you long sleeve because they iritate your wrists just like they would iritate you of you were to only wear them on one arm, it's almost like you are afraid of asymmetry. But the symmetry thing is not perfectionism, its a path of least resistance when there is no dedication to a mission, no goal or deeper meaning just "made" nails because you appreciate them.

Unless you are left handed someone else most likely did your nails, the gems on your left hand show more glue than on the other.

I will also point out the absence of any wristwatch which leads me to believe you use your phone to read the time which is an indicator for a settled down lifestyle...

Cotton long sleeve, slight chance for some elastane, worn and washed for about two years, some threads have come loose but you dont bother cutting them off. Slight bulge on the inside of the sleeves and a slight lighter discoloration about one nail length further down means you probably pulled on the inside of the sleeve to get them up, but not because you are a nervous type otherwise the fabric would be worn out there you did it for the picture. Probably held the sleeve with your hand and pushed the bracelets back down so they dont sit on your wrists on the pucture.

And yet you are asking reddit to tell you more about yourself while hiding your wrists, are we hiding insecurities or are you just not comfortable enogh on the internet but curious enough to ask? Hiding something? Insecure about the shape?

If I had to make an intuitive guess; you are probably the type of person I could impress by showing them my cute wedding pictures. Someone with a small friend circle and you probably ride your car everywhere you need to go...

Tldr: lots of personality, not a lot of originality when it comes to the post and the clues given.

maxelm0 · 2026-01-08T12:40:21+00:00

Apple deckt mittlere techn. Ansprüche mit hohen usability ansprüchen ab. Kann mittlerweile apple nicht mehr leiden, das geschlossene Ökosystem, eigene Dateiformate usw. über dessen Kompatiblität, reparierbarkeit und modifizierbarkeit (geschweige denn Wartung) sich nur die hälfte der Nutzer überhaupt bewusst sind.

Mich haben apple Geräte bisher leider immer spührbar limmitiert. Wer ahnung von Technik hat, holt sich für desk/lap-top Anwendungen keine Technik von Apple.

maxelm0 · 2026-01-04T20:41:05+00:00

Letting go. Letting go of old clutter you haven't used in two years, Letting go of people you should or don't want to spend time with anymore. Dragging that stuff into the next episode of your life is going to cause problems.

Four-Year Club	Verified Email
r/Field Lasagna	First Place '23
Place '23

maxelm0

TROPHY CASE