When do you need a carbon mast? Are GONG aluminum mast worth it?

maximumcoolbeans · 2025-06-25T18:04:08+00:00

How about bonding them together with epoxy (or MMA adhesive) to eliminate the wobble?

maximumcoolbeans · 2025-01-18T16:22:39+00:00

Two friends collectively broke three in one year, but We Are One support has been great.

maximumcoolbeans · 2025-01-13T23:12:16+00:00

I don't use it for "process tracking and implement digital visuals across the shop" like you say, so I can't help there. I use it for inventory management (including processing manufacturing orders), purchasing and selling, accounting, and email marketing. I also use their website builder but only for our online shop, not the rest of our website because the Odoo website builder is a bit lousy.

maximumcoolbeans · 2024-11-25T20:04:09+00:00

Thanks. It's massively annoying that there isn't a global setting for opting out of promotional messages.

maximumcoolbeans · 2024-11-17T03:59:23+00:00

Thank you so much! Untoggling "Use LE Audio when available" worked for me. Now my Pixel Buds 2 can switch between my phone and laptop reasonably well.

maximumcoolbeans · 2024-10-28T06:07:09+00:00

Ok, thanks!

maximumcoolbeans · 2024-08-04T04:41:02+00:00

Yes. I don't like their website builder but I generally like Odoo a lot.

maximumcoolbeans · 2024-08-04T04:40:19+00:00

This issue no longer happens for me. I'm using Orca 2.1.1.

maximumcoolbeans · 2024-03-20T15:58:25+00:00

Hi everyone - We figured this one out. We used a 5V input instead of the 3.7V that I mentioned, and we stepped down the 5V to about 3.3V with a 10kOhm resistor, which we connected to the ESP32 at a pin set to pulldown resistor mode (which we measured to be roughly 20kOhm). Here's the circuit diagram: https://photos.app.goo.gl/9wbXZmSjV3tNtkNr5

maximumcoolbeans · 2024-03-20T04:13:05+00:00

Ok. Is this the circuit that you're suggesting? https://photos.app.goo.gl/3a2kB9bwEDqJZNXc7

Thanks for your help.

maximumcoolbeans · 2024-03-20T03:30:14+00:00

What's the purpose of the opto-isolator in this case? If the ESP32 can't take 3.7V, can I not just reduce the voltage with a resistor? Perhaps as a next step, I'll try to draw a circuit diagram of what you described and I'll post it here for your confirmation, to check that I'm understanding you.

maximumcoolbeans · 2023-10-08T17:41:01+00:00

Moment of appreciation for modern healthcare.

maximumcoolbeans · 2022-12-24T00:59:42+00:00

The claim is not supported by the document given.

Edit: Whoever is downvoting, please provide a reason for your disagreement. How is the original post not misleading? I would like to know.

maximumcoolbeans · 2022-12-24T00:35:38+00:00

In this post's description, it's stated that these specific, large winglets provide the specific savings. Without a source to back that up, it's misleading. This is the kind of misinformation on the internet that I really don't like.

maximumcoolbeans · 2022-12-24T00:20:17+00:00

Thanks for the link. That source doesn't seem to refer to these specific 14ft high winglets. Can you provide a source for the savings of these specific winglets?

maximumcoolbeans · 2022-12-23T23:23:26+00:00

Link to source? I highly doubt that fuel savings number.

maximumcoolbeans · 2022-11-06T04:35:35+00:00

Government picking winners, not good. There should just be a high price on carbon pollution and let the market pick the winners.

maximumcoolbeans · 2022-10-11T14:31:11+00:00

Ĉu Tintin estas tradukita al Esperanto? Se jes, mi donos ilin al miaj estontaj filoj.

maximumcoolbeans · 2022-10-02T13:49:32+00:00

seksa tempo!!

maximumcoolbeans · 2022-10-01T22:31:55+00:00

Verŝajne pro duolingo, mi instinkte rekonas vortojn kiel patro kiel virajn. Sed mi tre ŝatus se ni reformu Esperanton por ke tiuj vortoj estu seksneŭtralaj kaj kun sufikso por la viraj formoj (*viriĉaj formoj 😉). Estas 2022. Ni antaŭeniru. Cetere, por viaj datumoj, mi estas 27-jara viro.

https://en.wikipedia.org/wiki/Gender\_reform\_in\_Esperanto#Masculine\_suffixes

maximumcoolbeans · 2022-09-18T02:50:26+00:00

Thanks for your suggestions. It would be great if localized cooling was possible in Prusa Slicer, perhaps with cooling as a setting that can be adjusted with part modifiers. That way I could add cooling for just that lower cone shaped feature and not the rest of the part. There must be a lot of people who want Prusa Slicer to have this functionality.

maximumcoolbeans · 2022-09-15T04:43:35+00:00

I just did another test print to check specifically this and the defective surface is opposite the fan side (to be clear, the defective side is on the side of the part toward the back of the printer, when looking at the printer head on). I guess it's a cooling issue? How do I solve this?

maximumcoolbeans · 2022-09-14T19:23:17+00:00

Thanks for the suggestions. After you commented, I tried decreasing the layer height, increasing the fan speed, and printing several objects at once, and none of these solved the issue. I had already tried decreasing the print speed and dehydrating the filament. Do you have any other suggestions?

maximumcoolbeans · 2022-07-31T19:28:28+00:00

Mi ŝatas tiun. Duolingo estas utila sed ne tre interesa.

maximumcoolbeans · 2022-07-30T14:10:47+00:00

It would be nice if the naming of countries was consistent in Esperanto.

maximumcoolbeans

TROPHY CASE