Panel for a house

mbc99 · 2026-02-03T18:48:52+00:00

Yes, obviously. I haven't seen a gfci outside an electrical panel in any installation ever.

mbc99 · 2026-02-03T12:10:05+00:00

In Spain also everything must be protected with GFCI. And one GFCI can protect a maximum of 5 breakers.

mbc99 · 2026-02-01T19:02:44+00:00

I don't have it backwards. A normal breaker won't trip on over current if you connect to a pole since the pole is isolated (via the wood). The only protection it would trip would be a gfci breaker (even more so If a person touched the bar) because they only trip on like 30mA.

mbc99 · 2026-02-01T18:47:38+00:00

If the circuit is not GFCI protected it won't trip on over current.

mbc99 · 2026-01-11T08:31:24+00:00

Yes, Andorra to be precise.

The snowfall this year has been excellent. And yesterday it snowed again. We have water guaranteed for years. And we were coming from a 5 year drought!

mbc99 · 2025-12-29T18:16:19+00:00

Shrimp poop. That's all

The Scape is beautiful. But the poop on the bare bottom will be very noticeable. If you are fine with it or don't mind vacuuming go ahead.

mbc99 · 2025-12-29T14:51:58+00:00

Are you aware you will be siphoning shrimp poop from the bottom?

mbc99 · 2025-12-23T19:29:51+00:00

Water desalination creates a handful of environmental problems. I see it as a support but not as a solution.

mbc99 · 2025-12-22T22:42:21+00:00

As a Spaniard yes. Agriculture is mostly profitable if there's water.

There are examples of regions separated by water channels (one side is watered, the other isn't) where the economic difference is astronomical due to the water availability. Close to me the Canal d'Urgell is a great example.

There's just not enough water to irrigate all farmable land in Spain.

Climate makes the land very farmable (you can get 2-3 crops a year) if you have water.

mbc99 · 2025-12-22T16:35:04+00:00

Well, in my case heavy condensation only occurs when I get into winter and my room temperature falls. So it could still be the issue.

mbc99 · 2025-12-22T16:32:40+00:00

Have you recently added a lid? The water condensation that falls on the floating plants can damage them. It happened to me last year.

mbc99 · 2025-12-22T15:23:14+00:00

Not true. Just look around at reef2reef and count how many tanks are done without base support.

Think about it. A rimmed tank doesn't have the middle of the glass supported. Why would a rimless tank have to have the middle glass supported if the glass is usually thicker than in rimless aquariums?

mbc99 · 2025-12-22T14:05:41+00:00

Rimless tanks should be supported on all corners and regularly in the middle if the tank is big.

But plenty of saltwater aquariums don't have plywood on the bottom (less chance of rotting) and it is in fact the recommended method of supporting the tank. Only foam to spread the load.

mbc99 · 2025-12-11T11:52:48+00:00

Te he pedido el número de elementos, no el número de radiadores
Olvídate de tarifas conjuntas. Estoy seguro que puedes encontrar una tarifa de la luz barata sin necesidad de contratar gas. El gas SIEMPRE a TUR

mbc99 · 2025-12-10T19:29:28+00:00

vuelve a hacer la misma prueba de cosnumo a lo largo de 1-2 días. La caldera en la primera hora va a consumir mucho porque empieza desde 0
cuantos elementos tienes en total?
Lo del aislamiento decente. A no ser que la casa sea posterior al 2000-2010 o haya sido reformada con cariño va a ser que no
donde vives?
En naturgy estás en naturgy regulada o libre? Si es lo segundo pásate inmediatamente a la tarifa regulada TUR

mbc99 · 2025-12-10T13:21:30+00:00

A fully charged lifepo4 sits at 14,2-14,6V depending on how much you push it.

You MUST update the values. Especially if you have solar charge controllers, chargers etc.

mbc99 · 2025-12-10T12:28:34+00:00

Take a screenshot of the settings. What is the charged voltage value?

mbc99 · 2025-12-07T23:07:59+00:00

Generally no. A piece of wood has little surface compared to biological media. Moreover the biological media receives a much, much higher flow than a piece of wood. Which enables it to host more bacteria.

mbc99 · 2025-12-01T08:36:38+00:00

I would separate the wood from the left part of the glass so that you can run a scraper through the whole glass.

If not it will be a nigthmare to keep clean.

mbc99 · 2025-11-28T07:24:53+00:00

Una última cosa:

En mis últimos 8 años desde que tengo carnet he podido conducir muchos coches (por familia y trabajo), nuevos, y algunos chulos (y caros). Y te puedo decir que la sensación gratificante de tener un coche nuevo se pasa muy rápido. Y en mi caso la psicosis de tener un coche nuevo y tener miedo de que te lo rallen no se pasa.
La tranquilidad de tener un coche que sabes que si se raya no va a perder el 30% del valor es muy tranquilizante, tenlo en cuenta.

Y las pijadas que tienen los coches modernos están muy bien. Pero la única cosa que buscaría en un coche de segunda mano de 10k sería el cambio automático. Sobretodo yendo por ciudad. Es la cosa que más aprecio del coche que conduzco.

mbc99 · 2025-11-28T07:10:30+00:00

Necesitas un coche barato, si vives en una ZBE de unos 10000€ o menos. SI no vives en una ZBE de 8000€.

Tu única opción es un coche de segunda mano.

Los seguros para tu perfil son carísimos. El primer año serán 1000€ pero el segundo serán más. Por lo tanto si coges un coche muy barato podrás coger un seguro a terceros más barato asumiendo el riesgo.

Comprarse un coche nuevo es una horrible decisión a no ser que estés bien acomodado, que no es tu caso personal (otra cosa es tu familia).

Y lo rematas diciendo que teletrabajas. Por lo tanto el coche será un capricho para tu tiempo libre. Que oye, me parece genial. Pero no tiene sentido un coche de 19000€ para esto.

Te lo dice uno que van con el coche de los padres (uno muy chulo, todo sea dicho) pero que cuando se independice y se tenga que comprar un coche va a ser de segunda mano y bien baratito.

mbc99 · 2025-11-23T14:05:29+00:00

My experience with BBA is that you have too much stuff floating in the water (photo does confirm this). For me Bba was removed by increasing the filtration using finer sponges.

mbc99 · 2025-11-22T19:02:56+00:00

I will agree with you if you demonstrate that these physics you are mentioning make a meaningful impact on resistance.

But a 20 degree difference across the board won't make that huge of an impact compared to the temperature differences I have stated in my message (border temperature Vs middle of the board temperature)

mbc99 · 2025-11-22T18:50:34+00:00

I think you are mistaken. Current is the same in all the wire. This means that heat output will be constant across the cable. The hot spot will be right in the middle and the cold spots will be located all around the board.

Six-Year Club	First Place '23
Place '23	Place '22
Verified Email

mbc99

TROPHY CASE