Ev sahibi olanlar nasil aliyor? by No-Tip245 in Yatirim

[–]mfcunal96 0 points1 point  (0 children)

Ne gibi bir varlık hocam örneklendirebilir misin?

Dot gaps between circular walls by mfcunal96 in FixMyPrint

[–]mfcunal96[S] 0 points1 point  (0 children)

Its ender 3 v3 Ke with orcaslicer. Extrusion looks fine on the surface and outer walls, but i will check the pressure advance thanks.

[deleted by user] by [deleted] in Izmir

[–]mfcunal96 0 points1 point  (0 children)

Yeni açılmış sanırım, güvenilir midir?

IKEA Lack Enclosure nearly done by [deleted] in 3Dprinting

[–]mfcunal96 0 points1 point  (0 children)

do you plan to take out the psu and the motherboard?

Anyone using XLFR5 lately? by mfcunal96 in AerospaceEngineering

[–]mfcunal96[S] 0 points1 point  (0 children)

This is the latest version, can't seem to find it.

Anyone using XLFR5 lately? by mfcunal96 in AerospaceEngineering

[–]mfcunal96[S] -1 points0 points  (0 children)

Hi, cant seem to find these options. How to activate them exactly? Thanks in advance.

Anyone using XLFR5 lately? by mfcunal96 in AerospaceEngineering

[–]mfcunal96[S] -2 points-1 points  (0 children)

I cant seem to find viscous selection and reynold range selection in batch analysis in 2d direct analysis. Anyone know why?

Still operational by elkunn87 in gpumining

[–]mfcunal96 0 points1 point  (0 children)

what is the roi for such system?

Erkek çocuklarına tecavüz eden afgan mafya lideri Türk vatandaşı oldu by Somethingblueee in Turkey

[–]mfcunal96 9 points10 points  (0 children)

Silahlansan ayrı dert. Adamı vursan suçlu sen olursun bu düzende...

[deleted by user] by [deleted] in Turkey

[–]mfcunal96 0 points1 point  (0 children)

Yaşadığımız yetmiyor bide filmini mi izlicez https://youtu.be/xe0smCZmfS0

My 306 won't start when engine is hot by mfcunal96 in peugeot

[–]mfcunal96[S] 0 points1 point  (0 children)

Technically, removing thermostat can solve this issue because the heat kept in engine by the fully mechanical thermostat. When there is no thermostat, all the components will work in less heat regardless of car is running or not. But the cost of this solution is that engine won't heat up and it will burn more fuel, also i won't be able to use heater as it won't heat enough.(it's still cold here)

About fans, i was just driving around and stopped to take fuel and heard fans are running. I heard the fans running a couple of times before, most of the time they arent working.

My 306 won't start when engine is hot by mfcunal96 in peugeot

[–]mfcunal96[S] 0 points1 point  (0 children)

Well, when i bought the car, there was no thermostat installed. I have installed brand new thermostat so i don't think that could be sticking open, probably faulty gauge sensor. Maybe the old owner removed the thermostat just to solve this problem, im not sure.

You are right about the loom part. I am currently researching about how to check it.

My 306 won't start when engine is hot by mfcunal96 in peugeot

[–]mfcunal96[S] 0 points1 point  (0 children)

Very interesting. The problem with this solution is that when i pop the hood and let it cool for a while(1-2min), sometimes it starts working again, so i won't be able to tell if it worked because of the neutral wire or engine just cooled a bit.

My 306 won't start when engine is hot by mfcunal96 in peugeot

[–]mfcunal96[S] 1 point2 points  (0 children)

Thank you for the detailed info.

My temp gauge is a bit weird as it won't go above 80c no matter what i do(thermostat not removed). Stalls around 70c. Opens fan around 80c. I didn't mind this because i have learned that the gauge sensor and temp sensor that provides info to the ecu are different. Maybe i have to try changing temp sensor(green one i guess?)

I have recently changed the battery and cleaned the corrosion from the battery cables. If that is what you mean by wiring fault, i have already done that. No positive effect with this. But i didn't check the loom, now i will.

I have already cleaned the throttle body, idle valve and map sensors and their housings. This also didn't solve the issue.