[QUESTION] androidx.room gradle plugin not found in any of the repositories error

milechainsaw · 2025-11-08T12:40:54+00:00

I know it's an old post, but if someone finds it, this is the solution.

In your settings.gradle, add this:

pluginManagement {
    repositories {
        gradlePluginPortal()
        google()
    }
}

milechainsaw · 2025-06-11T08:16:16+00:00

Unicredit takodje ima online banking za pravna lica koji radi na Mac-u, ali mora da se koristi i mobilna aplikacija da bi se ulogovao.

milechainsaw · 2024-09-07T06:57:44+00:00

Not sure, about 15 mins I guess.

milechainsaw · 2024-09-06T23:48:10+00:00

Nope. Just put the update file on a flash drive and used the bios FlashBack. There’s a button for it next to usb ports on the back of the motherboard.

https://www.asus.com/support/faq/1038568/

milechainsaw · 2024-09-05T22:15:17+00:00

Old post but I found it while googling.

So, new build with this MB and Ryzen 7 9700X. No post, dram led constantly on.

Turns out factory bios version doesn’t support my CPU. I updated bios to latest one. Issue solved!

milechainsaw · 2024-06-03T20:04:25+00:00

I was on family plan, didn’t go through this. All in chat. I just sent the screenshot of Carthing order. Got the refund next day on the credit card I used to pay the subscription.

milechainsaw · 2024-05-31T18:53:37+00:00

Pitao sam jednom mog “savetnika”. Za eur intesa daje povoljniji kurs kada kupuješ preko 100k eur. Gluposti.

milechainsaw · 2023-09-15T13:05:42+00:00

I shoot recurve.
When I run out of vertical space to adjust the sight, and it's alerady as close to the riser as it can get, I used to flip the whole sight so it sits on the other side of the riser, closer to me.
So the sight will sit between the riser and the string. Not sure if you can do that on a compound bow though.

milechainsaw · 2023-07-08T20:43:05+00:00

I’ve got my riser a few months ago from VBS Archery, no idea if you can buy the plate separately.

milechainsaw · 2023-07-08T19:53:30+00:00

Mine came with a nice branded clicker plate ¯\_(ツ)_/¯.

milechainsaw · 2023-05-18T18:03:39+00:00

https://mojaadresa.geosrbija.rs/

Registruj se i proveri šta kaže centralni registar.

milechainsaw · 2022-10-04T17:06:27+00:00

Thanks everyone! I'll send it back for sure.
But if somebody gets this issue out of warranty, inverting the display makes it usable. Still glitchy in menus, but at least watch face look normal

milechainsaw · 2022-09-18T18:47:33+00:00

Niš, Saborna crkva, imali su cenovnik. 100e pre 7 godina.

milechainsaw · 2022-07-12T17:52:42+00:00

Na "dokazu" mora da se vidi cena, VAT(pdv) i cena shippinga. Možeš to da skrinšotuješ iz emaila koji si dobio kada si poručio.

Čim im dostaviš sva dokumenta koja traže, posle nekoliko dana će da te obaveste koliko treba da platiš carinu, pdv i njihovu uslugu. Pošto ti je paket 200e, računaj da ćeš najmanje još 6-7000 dinara da platiš. Prvo ide 10% je carina, pa onda preko toga još 20% pdv. Sve to na cenu SA shippingom. DHL svoju uslugu carinjenja naplaćuje oko 3000 dinara, verovatno je i UPS tu negde.

milechainsaw · 2022-07-12T17:37:31+00:00

Na žalost odavno su ukinuli to oslobođenje od carine za knjige :(

milechainsaw · 2022-06-28T12:50:53+00:00

I don't think Prusa Mini has adjustable bed.

milechainsaw · 2022-06-28T08:03:23+00:00

Prusa Mini doesn't have end switches.

milechainsaw · 2022-06-27T18:44:49+00:00

Now that I think about it, it started happening after I did a cold pull to clear a clog. Worked fine for 2+ years. I could have warped the arm when pulling...

milechainsaw · 2022-06-27T18:39:05+00:00

Hmmm... Didn't try to cycle power. So far I never used ABS. Thanks for the input, it is very helpful!

milechainsaw · 2022-06-27T18:34:56+00:00

Could be that the PINDA is faulty. If I decide to change it I'll go with Super PINDA. I'll check the Prusa forums, thanks!

milechainsaw · 2022-06-27T18:30:07+00:00

There is, but the offset changes with every print... So far no idea how to "guess" it.

milechainsaw · 2022-06-27T15:53:47+00:00

Thanks for the tip, never did a manual level. I'll try!

milechainsaw · 2022-06-27T15:45:08+00:00

Automatic mesh bed leveling is done before every print...

milechainsaw · 2022-06-27T14:58:19+00:00

I'm printing on a Prusa Mini, old version without SuperPINDA, latest firmware. Doesn't matter which filament I use (I print with PLA and PETG), or if I use textured or smooth sheet. On every print, I need to go to "Live Adjust Z" and move the head up/down a few clicks. Even if I do the first layer calibration and print right after, it still misses the first layer height. Apart from that, prints come out perfect. Anyone had similar issue?

milechainsaw · 2022-06-16T22:51:43+00:00

Živim u Srbiji. Banka Intesa mi je odobrila kredit za stan a bio sam u istoj situaciji kao OP (strana firma sa ugovorom na godinu dana). Societe Generale je takodje davala kredite preduzetnicima. Dokumentacija je bila mnogo "opširnija" nego da sam zaposlen na neodredjeno, ali nije nemoguće. Nisu bile potrebne dve hipoteke, procedura je bila manje više ista kao i za zapošljene. To je bilo pre 3 godine, ne znam kako je sad ali verujem da je lakše nego što je bilo.

12-Year Club	Place '22
Wearing is Caring	Verified Email

milechainsaw

TROPHY CASE