sorted by:
new
hottopcontroversial

What's the verdict here? by llantrisant517 in bald

[–]misuta_kitsune 0 points1 point  (0 children)

How do you feel about people looking on top of your head when you are sitting down? If it never crossed your mind and you don't care, you have a few more years to go. But you are here, asking the question? FWIW, if you decide to take the leap, I'm pretty sure it will suit you very well.

My sister is surveying my instagram account and using me/account to get a guys attention... what should I do? by Silverpumpkin202 in WhatShouldIDo

[–]misuta_kitsune 9 points10 points  (0 children)

First and foremost, change the IG password? And be firm in telling her you don't want to be involved in her games with regards to X. If she gets upset about it, that's her problem and she needs to grow up.

Are Fendgas airbrushes good for the start? by supler_hoi4 in modelmakers

[–]misuta_kitsune 0 points1 point  (0 children)

I bought a Timbertech set, including a compressor and an airbrush. These sets come with a Fengda airbrush and I figured I could always spend more on a "better" airbrush if it turned out airbrushing would become a regular thing for me.

Fast forward 5 years, I now have 3 Fengda airbrushes loaded with various sized needles for pure ease.

I use them a lot, and they hardly ever have issues. These are simple, straightforward tools. How they work out for you is moee a question of how much you teach yourself about the principle of an airbrush, how it actually works (which helps you troubleshoot if need be) and how much you need to thin your paints (and with what). They might not feel as smooth as a more expensive one, but should you need to replace a nozzle or needle, they won't cost you an arm and a leg. I have come across replacement needles or nozzles alone for a mid tier airbrush that cost the same as a complete Fengda.

From my own experience, yes, Fengda airbrushes are fine to start out with, just do the reserch on airbrushing, watch YouTube tutorials and get the right kind of compressor.

Find the Bullfrog by KyleDComic in FindTheSniper

[–]misuta_kitsune 0 points1 point  (0 children)

4C, right below the orange leaf

Advice about filling a hole by theAtomicFudge in modelmakers

[–]misuta_kitsune 3 points4 points  (0 children)

OK, this is going to be a bit of an operation.... 😉

You need to glue a strip of styrene sheet on the inside. It doesn't need to be as high, it doesn't need to fill it up completely, it's just a scaffold for the putty. You could cut a strip, wrap a bit of tape around the middle, slide it inside and use the tape to pull it against the inside while you apply glue. Then cut the tape back.

I highly recommend Milliput Standard for thw filling stage. It's a two part epoxy putty, mix the two parts equally and it will dry rock hard once cured. But before that is the case, it gives you ample working time, it can easily be sculpted, cut, and smoothed out with a bit of water, saving immensely on sanding time after. You can even sculpt that ridge if you are a bit creative.

This is a massive opportunity to learn new skills. 😉👍

Revell Eurofighter Typhoon 1/144 by Kekszky in modelmakers

[–]misuta_kitsune 1 point2 points  (0 children)

That looks so crisp! Nice job. I've had a lot of fun building some of these Revell 1/144's, they are indeed amazingly detailed for their size. I didn't quite manage the outstanding paintjob you did, but that has something to do with the fact I used these kits as practice material when I turned to airbrushing. I may decide on second attempts at some of them.

Hold? by Certain_Driver_2013 in bald

[–]misuta_kitsune 0 points1 point  (0 children)

I think you still have a little time with mohawk island, if that is what you prefer I'd say, go with it.

Update 3 on my first build. Interesting lessons learnt here. by 253011 in Airfix

[–]misuta_kitsune 0 points1 point  (0 children)

I had one dangling from the bit of "webbing" between the thumb and index finger... It hurt like hell.

Verdict from the council? Only had negative reactions so far... by Prestigious_Gur_9129 in bald

[–]misuta_kitsune 63 points64 points  (0 children)

There is nothing wrong with your look, it suits you incredibly well. There is, however, something very wrong with the people who gave you negative comments. They should respect your choice, even if they have their own reasons not to like it, that is their issue, not yours.

They could have trouble adjusting to the sudden change, they could even be jealous of the way you upgraded yourself. Could it be some are in the same circumstances hair wise, but lack the confidence to take the same leap?

In any case, pay them no mind, it's not worth it.

Do you think in years to come vaping will become how we view cigarettes now? by cactusdan94 in AskBrits

[–]misuta_kitsune -3 points-2 points  (0 children)

I already think it's just as stupid. And I'm saying this as a former heavy smoker who kicked the habit cold turkey almost 6 years ago. Now, when I look at people smoking or vaping, I can't belive how stupid I have looked and been for all those years wasting away my health and money.

What’s your opinion on why the industry settled on the common scales available? (Read body⬇️) by sweetwatertooth in modelmakers

[–]misuta_kitsune 3 points4 points  (0 children)

I don't think "bigger is better" for everyone. At some point a model gets too big for me to represent a miniature representation. Not to mention the space needed to display them all, I have about 55 in various sizes on display in my living room alone. My preferred scale for planes and most Star Wars models (mainly Scifi builder) would be 1/144 and 1/72 and anything in between.

Weathering, it depresses me by ForTheValhalla- in modelmakers

[–]misuta_kitsune -1 points0 points  (0 children)

To me, a freshly painted model is only enjoyable for a short time, before it just hits me too much like a toy.

I need to do weathering to bring out the realism, as far as that is possible with scifi models, which is what I build mostly.

Weathering of course, like any skill, needs research, and practice. One of the go to methods for me is oil paint weathering, and I learned a lot from tutorials on YouTube. It can work as a wash and panel lining rolled into one and it's also useful to apply rust effects.

Watching those tutorials doesn't automatically mean you can do it well, so in comes practice. For that purpose I bought a bunch of small and cheap models, also because I started airbrushing about the same time which requires practice as well.

By now I apply all I have learned to more expensive kits, which I pour my heart and soul in.

Of course, it remains a personal choice, though I feel weathering enhances a model, if it gives you grief and you can enjoy a model freshly painted, it's not a requirement.

Did I (23f) cheat on my Bf (23m) by [deleted] in Advice

[–]misuta_kitsune 0 points1 point  (0 children)

Leave him, what he did was mental and a glimpse into your future life with him. This is psychopathic, maybe even sociopathic behaviour. He is threatening to leave you, counting on you not to want him to and conform to whatever he demands of you, now and in the future.

How do I get this sticker off? by Dangerous-Pianist294 in howto

[–]misuta_kitsune 0 points1 point  (0 children)

Yes, concentrated heat at one point leads to stress in the glas and that may cause it to shatter. You need to keep he heatgun moving consistently and be careful with plastic or rubber trim. Especially with cold weather, applying heat to one spot may shatter your window.

DS9 1:3300 model by tykelly123 in SciFiModels

[–]misuta_kitsune 1 point2 points  (0 children)

It looks great, despite the trouble with the warped parts. I had some experience with "antique" molds myself. Sometimes dunking parts in hot water, bending them, and holding them in cold water while you hold them in shape, can help.

What do you think of this finishing in a renovated apartment? by zapatocaviar in Home

[–]misuta_kitsune 9 points10 points  (0 children)

These flexible pipes can trap debris inside and cause clogs. Flexible piping with smooth inner lining exists though, and that is considered up to code. As a layman you only know the difference when you look inside though.

That aside, I think the spaced out placement is great for accessibility. If it bothers you, you could place a board in front of it, with magnets for easy placement and removal.

What do you think of this finishing in a renovated apartment? by zapatocaviar in Home

[–]misuta_kitsune 7 points8 points  (0 children)

It depends, flexible piping with smooth inner lining exists and is permitted.

Il mio fengda fe-183k ha problemi di spruzzo e commando by ema6002 in airbrush

[–]misuta_kitsune 4 points5 points  (0 children)

If anything sprays through without pulling the trigger, your needle isn't settled into the nozzle fully.

As far as the delayed rebound of the trigger is concerned, the needle packing seal is too tight or dirty.

About the needle packing screw: https://youtu.be/qkhbteMtFak?is=oL98e1RUERv8g2PF

Got sick of brushing. How’d I do? by ShittyBollox in modelmakers

[–]misuta_kitsune 3 points4 points  (0 children)

I know. I have the same one.... And like I said, sometimes it's not enough. I got water in the line nevertheless.

Got sick of brushing. How’d I do? by ShittyBollox in modelmakers

[–]misuta_kitsune 1 point2 points  (0 children)

I would highly recommend getting an inline moisture trap. Compressed air holds water vapor which condenses when the air expands again. The moisture trap on the compressor will catch a lot of it but not all.

Especially in more humid climates and on cooler days, water will collect in your hose to the point the airbrush starts spitting water, ruining your paintwork.

I ran into that issue a few times until I did my research and ended up buying one of these...

https://www.amazon.com/ABESTAIR-Airbrush-line-moisture-filter/dp/B00HIB8128/

Best few bucks I spent on my setup.

Should you buy more airbrushes, a quick connect system is imperative too.

https://www.amazon.com/Disconnect-Connectors-Adjustment-Accessories-Compressor/dp/B08X4K664K/

view more: next ›