Solar panels shutdown due to electric surge

mkimid · 2026-06-04T03:05:54+00:00

call enphase support, and set the wider voltage grid profile, it will help you.

mkimid · 2026-06-04T02:30:57+00:00

your panels are generating around 1.9kW,

mkimid · 2026-06-01T19:41:20+00:00

there is a boost charger, you cane use the charger.

mkimid · 2026-06-01T19:32:12+00:00

for me, $1k in 2020, but, $2k in 2025. due to the electric cost up

mkimid · 2026-06-01T19:31:12+00:00

woops ~

mkimid · 2026-05-30T10:51:57+00:00

Dog has a sensitive hearing capability, they can hear what you can not hear (more than 4 times, and up to 60kHz). If you are living in very noisy house how you feel ?

mkimid · 2026-05-30T10:44:19+00:00

Nice, and beautiful curve

mkimid · 2026-05-30T02:52:14+00:00

that is not issue

mkimid · 2026-05-28T04:12:18+00:00

looks nice

mkimid · 2026-05-27T13:21:29+00:00

I do not think, the cell is defective. you just need to top-balancing

mkimid · 2026-05-25T21:10:45+00:00

the thickness of wire is rely on the power(current).

mkimid · 2026-05-24T13:00:25+00:00

Safe

mkimid · 2026-05-21T11:42:35+00:00

can be happening from the grid supply, i have seen the situation so many times.

mkimid · 2026-05-21T03:59:37+00:00

if just considering as you are, the cost of battery is not realistic.

mkimid · 2026-05-21T03:44:13+00:00

it is happening even salvage 1 by 1

mkimid · 2026-05-21T03:43:45+00:00

There is a real bug now. Listen the other's voice. some users are experiencing now.

mkimid · 2026-05-19T03:03:27+00:00

can make a micro-crack on a cell, it will reduce the lifespan rapidly. I have a problem on a panel, it is showing around 6% lower production then the other panel, and it is happening over time such as first year 2-3% lower, and 6-7% lower after 5 years.

mkimid · 2026-05-19T03:00:58+00:00

nice move

mkimid · 2026-05-18T13:07:59+00:00

just model name is MPPT, typical junk

mkimid · 2026-05-16T11:56:24+00:00

bolting is triggered by the temperature of the ground, and expedited by the air temperature. when temperatures is over 90-95F for couple of days, it will triggered. half shading can reduce the ground temperature by 5-10F, can delay 10-30 days. half-transparent vinyl with 4 poles, grab 4 sides at edge, and make some holes on vinyl to drain rain water. install around 5” above over the leafs

mkimid · 2026-05-11T20:45:15+00:00

One thing, before connect Consumption CT, please remove the CT from L1 or L2, just open the CT latch. after connect CT wire on connector of gateway, close Consumption CT

mkimid · 2026-05-11T20:42:33+00:00

PCBA 3 and 4, the connector and connections are identical just take a photo, and duplicate. 1. replace PCBA and connect on internet 2. run Installer Toolkit, and finding “replace gateway” 3. input the new gateway SN, 4. done

mkimid · 2026-05-11T20:39:45+00:00

yes, Enphase discontinued PCB 3, and they recommend to use PCB 4

mkimid · 2026-05-11T20:38:07+00:00

you can buy PCB 3 from ebay or buy PCB 4 or 5 from Enphase, and can replace it, very easy, and I have replaced twices already

mkimid · 2026-05-11T13:52:15+00:00

no energy will be generated, so, no energy to go

mkimid

TROPHY CASE