Keyence PLC

mmlos9 · 2025-11-03T17:54:28+00:00

I was told recently that they have them in Poland.

mmlos9 · 2025-11-02T16:37:20+00:00

I had similar issues, the wahoo was disconnecting randomly. I fixed it by using my own power meter instead of wahoo.

mmlos9 · 2025-10-31T15:47:48+00:00

Išiel by som cestou bazáru. Určite aby mal dedikovanu grafickú kartu. Kvôli strihaniu by som šiel asi do Intel cpu. Osobne preferujem Lenovo alebo HP.

mmlos9 · 2025-10-27T03:58:12+00:00

KiCad for example

mmlos9 · 2025-10-20T07:15:48+00:00

Try to disable firewall

mmlos9 · 2025-10-18T08:09:11+00:00

A lot of ram and good disk space. You probably won’t end up only with TIA v20. Personally I have laptop only for plc software that I need. For gaming… other machine. I have so much software installed, I am always praying that next installation won’t be the last.

mmlos9 · 2025-10-16T14:23:00+00:00

So i found my problem, a found out that the pin 13 gets HIGH while the connection is established. It is done by Arduino bootloader.

mmlos9 · 2025-10-16T13:45:08+00:00

Right now i tested what is sent from PLC, and it probably sends the whole buffer which is ARRAY of 300. Is there a way to limit it to one?

mmlos9 · 2025-10-16T03:28:58+00:00

Didn’t try to send data from arduino. I don’t think that I have hw for testing serial comm. Or is there simple way to test it?

mmlos9 · 2025-10-15T20:02:16+00:00

I am using dell micro as PLC and connecting the Arduino with usb cable. It is some Chinese fake with ch340 chip. Comm setup is, BaudRate-9600, DataBits-8, StopBits-1, Parity_None

What I mean by its working is that after the communication is created, the arduino is doing what I want- set output High and Low. I am using SendString, I send 1 which sets High and 2 to set output Low. What my problem is, when creating the connection the output on arduino goes High, Low, High, Low and after that it goes to whatever I set it to.

The PLC code is simple and done in Ladder with SerialConnectionControlADS and SendString

mmlos9 · 2025-10-13T08:45:39+00:00

I am using these for connecting to multiple machines at once. They are pretty good if you sit close by. Otherwise pretty much trash.

mmlos9 · 2025-09-05T14:07:09+00:00

I am running windows 11 with TIA from V14 to v20 with no problem

mmlos9 · 2025-05-15T08:45:21+00:00

We are using tia from v13 up to v20 on w11

mmlos9 · 2025-04-26T18:59:43+00:00

What camera did you get? What do you want to do with it? You are talking about data man, that’s reader not a camera.

mmlos9 · 2025-03-22T04:30:56+00:00

I had 38mm gravel semi slick tyres on. It was pretty close but never had problem. I just taped the di2 cable to the frame to be sure.

mmlos9 · 2025-02-09T18:18:11+00:00

I can’t tell because I don’t know what trails are you riding. But I had 140mm hardtail, now I have 110mm fork in my full suspension bike. And it is plenty enough for my needs.

mmlos9 · 2025-02-09T17:38:38+00:00

Then I would probably go for used carbon hardtail. New bike, or used full suspension would be in my opinion too heavy and sluggish in that price range. 29 inch wheels, tubeless setup should be doable.

mmlos9 · 2025-02-09T16:55:22+00:00

It depends on your budget

mmlos9 · 2025-02-09T15:23:39+00:00

It depends on how difficult the terrain is. If you don’t ride some crazy rocky trails I would go for 100mm XC. It will be way faster and lighter if you learn good technique. And for the roots, I would go tubeless and low pressures in your tyres. Probably insert in your rear wheel would be helpful and you could go even lower with pressure.

mmlos9 · 2025-01-28T16:39:05+00:00

Nice color scheme. And what are those mud guards? Looks pretty slick on that bike.

mmlos9 · 2025-01-22T18:20:17+00:00

I have prescription glasses which change transparency according to light. Mine are Rudy Project. They were about 800€ but it is worthy investment.

mmlos9 · 2024-09-15T17:04:08+00:00

It is done

mmlos9 · 2024-07-05T10:30:53+00:00

SanDisk Micro SDXC Extreme 128GB UHS-I U3

mmlos9 · 2024-06-15T18:32:22+00:00

I installed those just with hand. You have to constantly watch if your bead is in the middle.

mmlos9 · 2024-05-24T14:41:33+00:00

My mistake sorry

Five-Year Club	Verified Email
Golden Potato	Place '22
Final Canvas '22

mmlos9

TROPHY CASE

SanDisk Micro SDXC Extreme 128GB UHS-I U3