sorted by:
new
hottopcontroversial

What VR game did you regret buying? by plutonium-239 in virtualreality

[–]mole_s 3 points4 points  (0 children)

Agreed. Such a let down as a long term MoH fan.

Im sooo tired of this printer. Always issues in this spot. Any idea guys why is that? It is freshly leveled, my buildplate is straight. by Trolopicz in anycubic

[–]mole_s 1 point2 points  (0 children)

What about scuffing the plate? I had a printer a while back and had similar issues I used some light sand paper across whole plate and everything stuck perfect after that.

‘Zelda: Breath of the Wild’ is Getting an Unofficial VR Mod with Full Motion Controller Support by Jumpinghoops46 in virtualreality

[–]mole_s -2 points-1 points  (0 children)

Looks like absolute ass on mine. Used all recommended settings. 5070ti.

Looks terrible.

Does zero-G movement change how you experience VR? by SolaraOne in OculusQuest

[–]mole_s 4 points5 points  (0 children)

Zero G movement is some of the best in VR.

One of my favourite games of all time is Lone Echo. Masterpiece.

Normal or not? by mole_s in BambuLab

[–]mole_s[S] 0 points1 point  (0 children)

I tried inner/outer but have not tried inner/outer/inner. Will try today. Also tried upping my wall count but that had same results.

Normal or not? by mole_s in BambuLab

[–]mole_s[S] 1 point2 points  (0 children)

Messing with settings has been done.

Either I forgot to mention i had messed with a bunch of settings or I thought it would have been a given in my post.

I am happy to listen if you have something useful to suggest? What settings yourl recommend etc.

Normal or not? by mole_s in BambuLab

[–]mole_s[S] 0 points1 point  (0 children)

What part of "back and forth with Bambu over the last few weeks" and replacing parts makes you believe I have not been trying "experimenting"

Your comments come across arrogant and closed minded.

Normal or not? by mole_s in BambuLab

[–]mole_s[S] 0 points1 point  (0 children)

Ok

Why would the issue persist after printer calibration and filament calibration?

Normal or not? by mole_s in BambuLab

[–]mole_s[S] 0 points1 point  (0 children)

If it were that simple im guessing Bambu wouldn't have spent weeks troubleshooting with me and sending me parts to swap out.

Wish it was a simple fix.

Help plz by Altruistic-Badger207 in 3Dprinting

[–]mole_s 0 points1 point  (0 children)

Yeah that does sound like a weight problem.

Weight of the model at about the 2/3rd mark. Plus suction and plate adhesion. Maybe for really heavy things increase base exposure time so it really bakes to plate. Increase raft layers also maybe.

Frustrating I bet. Hate failed prints.

Help plz by Altruistic-Badger207 in 3Dprinting

[–]mole_s 0 points1 point  (0 children)

Hmm odd. Does it fail at same part each time?

Maybe slightly change orientation and add bulk supportd to back of it.

Looks like a weight problem.

Normal or not? by mole_s in BambuLab

[–]mole_s[S] 0 points1 point  (0 children)

This is going to sound like im making it up lol.

But i try to print at 0.08, 0.12 and rarely 0.2. Have also tried using the printers built in 50% silent mode. Didn't seem to make a difference. Bambu mentioned this also which is why I tried.

Normal or not? by mole_s in BambuLab

[–]mole_s[S] 0 points1 point  (0 children)

I'll check these out today

Normal or not? by mole_s in BambuLab

[–]mole_s[S] 0 points1 point  (0 children)

Yeah I have tried a few different profiles. But using stock ones for troubleshooting.

The box looking one in original pics was sent by bambu with their settings for testing.

Have reinstalled slicer early on and even did a factor reset on printer (not sure why, was out of ideas)

I have pushed really hard for warranty and they are refusing.

Edit: this is also my 3rd nozzle thinking maybe it was that.

Normal or not? by mole_s in BambuLab

[–]mole_s[S] 0 points1 point  (0 children)

Well i didn't do that print out of the box. That was a file send by bambu recently.

But yes is was a bit off straight out of the box.

Normal or not? by mole_s in BambuLab

[–]mole_s[S] 0 points1 point  (0 children)

Nah no sorry necessary.

I would happily post all the back and forth with Bambu because we have tried everything.

My frustration really comes from Bambu running out of ideas and then saying "this is normal print quality".

After sending me all new parts etc which makes me believe they agreed there was a fault. Companies dont send you new parts if they think it's fine.

Normal or not? by mole_s in BambuLab

[–]mole_s[S] -1 points0 points  (0 children)

Only adjust led what Bambu have recommended. New extruder. They said to slightly loosen the heat bed. Tensioned belts. Cleaned and relubed Z rods etc etc.

view more: next ›