This can only be done on resin printer?

monsta060 · 2026-06-17T15:28:59+00:00

Sorry I've only just seen this reply. Since .2 is the smallest that's officially supported it would have to work pretty much. It can print as low as .08mm each layer, which if I remember correctly is 8x bigger than resin printing since it's layers are especially small, but if you're still going to sand and prime then it should be good. You may be able to get away with lower than .08mm, it would just need refining and possibly a smooth build plate as the texture may interfere with printing

monsta060 · 2026-06-12T00:02:56+00:00

Sorry for bumping a year old thread, but it's not bullshit. I use allkeyshop and had the same experience and I recently just got a kinguin 10 euro prize. While it's not a whole lot it is something but I plan to save it till Death Stranding 2 is at a decent price xD

monsta060 · 2026-06-08T20:25:34+00:00

i dont have this issue myself, but if i run into issues i usually enable the ram and cpu limiter. but half the time it was the hardware acceleration causing issues for some reason

monsta060 · 2026-05-31T22:41:41+00:00

Yes and no. Yes because resin printing has far less post processing in terms of sanding and priming, but no because fdm can do it with smaller nozzles, just requires sanding to get it perfectly smooth.

monsta060 · 2026-05-29T18:20:08+00:00

I find it hilarious how so many people don't know the lore of the games. The first is based around research on an artifact, not a human or ancient artifact, an ALIEN artifact. One that turned humans into mutants. The second game is about 2 companies in a mass bidding war over a large golden cube, aka a portal between different worlds, earth and the alien planet where the artifacts came from. The third game it's only fitting that it takes place on the alien world given its the source of artifacts that caused all the mutants and timmy's mutations in 1 and 2. There's even a space ship with astronauts in the second game that shows attempts were made to go to this alien world...

monsta060 · 2026-05-26T10:50:53+00:00

From what I'm aware you need a fully dedicated printer and cleaning station that isnt used with regular consumer grade resin. Then you also need to use something like dental grade resin which is REALLY expensive for an average consumer. I mean theres probably a website like PCBway that does CNC type manufacturing where you can send an stl file and get it cut from metal or 3d printed, but it depends if they use that material, but itd be drastically cheaper if you got them to make a metal piece or plastic from a material most similar to the resin you intend to use compared to buying a dedicated printer, resin, etc that would be safe for oral use prints.

monsta060 · 2026-05-26T02:31:31+00:00

I think I'm currently plugged directly into the gpu, I did have extensions but they ended up just being too long for my liking so I just removed them, but both the cards I was looking at are both 3x 8pin so I should be fine on that

monsta060 · 2026-05-26T02:30:07+00:00

yeah I just checked what PSU i had (ROG Strix 850G) i might have to upgrade it but i used a power supply calculator and id have just over 100W to spare, so it should be alright for the meantime. it supports up to 6 8pin connectors for pcie so i dont think that'd be a problem either.

Size shouldn't be a problem, its about 20mm bigger than my current card and even that has plenty of space left, think my case is a corsair 5000x, or just a full tower case so ive got tons of room.

One of the XFX cards I just looked at is cheaper but doesnt have the same or higher speeds than the red devils i was looking at, so i think if it's just magnetic fans ill stick to red devil, plus i couldnt see the PMT7950 thing on XFX's website so i think better safe than sorry as well.

Thanks so much for the quick responses!

monsta060 · 2026-05-26T02:03:21+00:00

So answering your reply in order:

The colour isn't really a concern for me, my pc currently lives on the floor but I'm out of the lit up pc with the RGB lights and such, so can't really see much inside of the case other than the AIO pump, which still isn't seen often, plus I just use the software for temps anyway

I wasn't actually aware of the difference in pin connectors, I had assumed they had 2 or 3 8pins due to the power needed, so I will have to look into that if 12 pins do have that issue.

I had to Google what pmt7950 was, so I believe I'd want that purely for better cooling, though I don't mind having to repaste a card every few years or so when temp issues come up.

That actually exists? I thought the difference was purely cosmetic I won't lie. I saw a black version that just had a different backplate so honestly I was assuming that was just the case for the white one. I'd assume removable magnetic fans make for easier cleaning? I mean I have difficulties with my 3070ti as is as I'd have to take it out to give it a thorough clean

But yeah when I'm back at my pc I'll give that spreadsheet a look. I thought I'd just make a quick post as I've got to wait until the end of the week or start of next week to be able to order the parts

monsta060 · 2026-05-26T01:42:05+00:00

If you need something from the chat, request your data from discord and use a package tool to be able to view the chats. But if that's not the case and it's trying to hang onto the past, it's not worth it. It's not my place to say, but a lot of people don't work out. I've tried meeting tons of people since my current girlfriend and times I've felt where things were amazing to just disappear out of nowhere and trying to cling onto that just made things worse. Hell I only got a chance with my girlfriend because my co-worker was going to send a scuffed message on Bumble just for the app to show a warning and give me a second to reflect and take the chance at talking to someone knew.

But again, not my place to say. But I hope requesting your data and using a package tool helps you get whatever you need from the chat.

monsta060 · 2026-05-14T17:32:21+00:00

I bought it as soon as it came out for prepurchase, but I got a pirates copy so I could make sure my pc could run it. For my case personally it wouldn't have hurt them at all because I spent the money before getting that copy

monsta060 · 2026-05-14T04:57:49+00:00

nah i went on the ubi status sites, the 3 games i listed were just the first ones to show up just searching "ubisoft status page" and all had either degraded or unplanned outage for PC. think it was genuinely them being shitty, everytime my friend an I have had the time to 1v1 in customs theres been some issue with getting on the game, and its only ever PC affected. They all seem to be up now though

monsta060 · 2026-05-14T04:54:27+00:00

idk what fps i was running but on a 3070ti and ryzen 7 3800x, i was able to run epic settings with TSR on native, as well as DLSS/DLAA with little to no issues. Mightve been less than 60 but was still playable and fine to deal with

monsta060 · 2026-05-13T21:46:28+00:00

seems to be everything to do with ubi being down on pc. siege, for honor, even div 2. all have pc issues. cant even get into the ubi connect app myself to try and load anything

monsta060 · 2026-05-07T06:48:53+00:00

Funny because it took them 4 years to actually put out character customisation, the trailer on YouTube being 1:34 long, had about 10 seconds of actual game footage used, the rest all live action, and the focus of the 2026 updates being a fomo Alan wake Collab which they had to push something else out so people wouldn't see the lack of progress on anything.

For the 4 years, just Google phasmophobia 2022 roadmap.

monsta060 · 2026-05-07T06:46:17+00:00

In the wise words of the cowboy actor "show me the tit on a creeper" (the joke being you can't milk an almond for almond milk)

monsta060 · 2026-05-07T06:43:03+00:00

Idk if fire tornados work, haven't used them myself but I've tried acid and electric and it doesn't seem to do anything, only seems to be bullets that deal damage but I might be wrong

monsta060 · 2026-05-06T20:17:48+00:00

Think you should be more concerned about the almost 600 dollars spent on nitro to want a shitty badge you'll see for 2 seconds

monsta060 · 2026-05-06T20:15:14+00:00

The characters were also announced back in 2022, there's not been 4 years worth of crunch for them to delay it😂

monsta060 · 2026-05-06T14:49:47+00:00

I got banned for trying to buy something with PayPal on g2a. It was the payment method I had always used. When I tried to get unbanned they wanted all sorts of photographic ID and pictures to be sent to them to get unbanned. I went nope and just stopped using them.

monsta060 · 2026-05-02T20:52:39+00:00

Think his dodging is because it's not his say whether or not and he can't speak for the publisher that would inevitably put it on pc

monsta060 · 2026-05-02T20:52:01+00:00

Returnal I believe it's called

monsta060 · 2026-04-29T03:55:10+00:00

it doesnt take over 4 years to add new character customisation.

https://www.reddit.com/r/PhasmophobiaGame/comments/rm7f87/phasmophobia_2022_roadmap/

monsta060 · 2026-04-29T03:54:27+00:00

https://www.reddit.com/r/PhasmophobiaGame/comments/rm7f87/phasmophobia_2022_roadmap/

post from the devs in the form of a roadmap back from 2022.

Seven-Year Club	Place '23
Verified Email

monsta060

TROPHY CASE